Integrating channel design and assessment methods based on sediment transport capacity in gravel bed streams

Natural channel design (NCD) and analytical channel design (ACD) are two competing approaches to stable channel design that share fundamental similarities in accounting for sediment transport processes with designs based on hybrid fluvial geomorphology and hydraulic engineering methods. In this paper, we highlight the linkage between ACD's capacity/supply ratio (CSR) and NCD's sediment capacity models (FLOWSED/POWERSED), illustrating how ACD and NCD have reached a point of convergent evolution within the stream restoration toolbox. We modified an existing CSR analytical spreadsheet tool which enabled us to predict relative channel stability using both conventional bed load transport equations and regional sediment regression curves. The stable channel design solutions based on measured data most closely matched the Parker (ACD) and/or Pagosa good/fair (NCD) relationships, which also showed the greatest CSR sensitivity in response to channel alterations. We found that CSR differences among the transport relationships became more extreme the further the design width deviated from the supply reach, suggesting that a stable upstream supply reach may serve as the best design analog. With this paper, we take a step toward resolving lingering controversy in the field of stream restoration, advancing the science and practice by reconciling key differences between ACD and NCD in the context of reach scale morphodynamics.     

国家地震紧急救援训练基地可控地震废墟设计(I)——结构地震破坏模式

我国是一个地震多发的国家,地震灾害给我国造成了巨大的经济损失和严重的生命伤亡。专业化的震后紧急搜索救援能够最大限度地减少人民生命财产的损失,是防震减灾体系不可或缺的组成部分。通过大量的地震灾害实例,并借鉴地震灾害评估方法和建筑物抗震设计,对危害人类生命财产的建筑物震害的特征按照结构类型进行了详细说明,通过对这些地震中常见震害的了解和认识,为国家地震紧急救援训练基地的规划设计和相应搜索救援训练科目的设置提供依据。     

三峡库区笋溪河流域面源污染及其与土壤可蚀性k值的关系

研究三峡库区面源污染特征及其与水土流失的关系,可为库区氮磷污染和土壤侵蚀控制提供依据.选择三峡库区库尾笋溪河流域,在流域内分园地、林地和耕地3种土地利用类型共采集126个土壤样品,并在主干和支流采集52个水质样品.根据EPIC模型计算土壤可蚀性k值,分析流域内土壤可蚀性k值对面源污染的影响.结果表明,笋溪河流域面源污染主要是氮污染,总氮均值达1.37 mg/L,氮素的主要形态为硝态氮,占总氮的71.2%;总磷浓度为0.1 mg/L.流域内土壤可蚀性k值均值为0.040,随着土层加深土壤可蚀性k值呈上升趋势;林地土壤可蚀性k值显著低于园地和耕地.笋溪河流域总氮浓度与园地和耕地0-20 cm土壤可蚀性k值有关,硝态氮浓度与耕地0-40 cm土壤可蚀性k值有关.因此,笋溪河流域面源污染严重,主要来源是耕地和园地,应实行免耕、植物篱等措施,同时减少化肥施用,增加有机肥比例,以增加土壤抗侵蚀能力,进而控制流域水土流失和面源污染.(图6参37)     

“U+L”型通风综采面合理挡风帘长度确定

合理长度的挡风帘可以有效减少工作面漏风量,避免瓦斯超限、爆炸等事故发生,保证工作面安全生产。模拟了有无挡风帘时和不同挡风帘长度时“U+L”型通风综采面采空区流场、瓦斯分布及上隅角等地瓦斯情况,验证了数学模型和参数的适用性,分析了挡风帘对采空区压力分布及瓦斯分布的影响,确定了“U+L”型通风综采面合理挡风帘长度。研究表明:挡风帘对采空区压力及瓦斯分布都有重要影响,挡风帘可以使采空区内特别是挡风帘遮挡区域采空区压力下降、瓦斯浓度升高; 随着挡风帘长度的增加,上隅角瓦斯浓度变化不大,采煤机机尾瓦斯浓度逐渐降低,滞后横川瓦斯浓度呈增大趋势;综合分析确定该采面合理挡风帘长度为120 m。     

基于功效系数法的特种设备宏观安全风险评价模型

为掌握特种设备的整体风险水平,明确监管方向和重心,基于幂函数型功效系数法,建立特种设备的宏观安全风险评价模型。应用模型研究全国特种设备的宏观风险,然后将其作为基准衡量北京地区电梯的风险水平。结果表明:应用特种设备宏观安全风险评价模型,可计算分析特种设备的整体风险,实现不同种类设备风险的横向对比;将气瓶的宏观风险作为风险的标准当量,可实现国家、地区、企业同类设备风险的纵向对比,有助于促进政府和企业的监管决策工作。     

亚热带水库沉积物钻孔中有机质的历史记录及其环境意义

氢指数(HI)是重要的有机质评价参数,能够反映沉积有机质中脂肪大分子物质的相对含量,并用于反演水生生态系统的历史初级生产力,有助于研究藻类生产力对污染物的富集作用。为了探讨氢指数的环境指示作用,选择了亚热带的3座水库作为研究对象,采用Rock-Eval热解与生物标志物-中性糖方法相结合的研究技术,研究了沉积钻孔有机质的来源与特征;并结合210Pb和137Cs定年技术,综合运用氢指数和总糖含量对水库的初级生产力进行了重建。结果表明:中富营养的增塘和联安水库沉积有机质主要来源于浮游藻类,且受降解的程度较小,而贫营养的新丰江水库钻孔下层有机质主要是受降解作用或陆源高等植物等的影响。近年来,3个水库的HI值都有显著性的增加,且与其对应的总糖含量以及近50年来的滑动平均温度都高度的相关,说明这些水库都经历了气候变暖所引起的初级生产力增长。同时,升高的水库生产力扩大了沉积物剖面中重金属和多环芳烃的累积。     

机体细胞镉摄入离子转运通道研究进展

镉是人体非必需金属离子,长期镉暴露易引发镉中毒。机体内没有负责镉转运的特定载体,镉可通过必需金属离子转运载体进入机体细胞。机体内能够转运镉的载体有多种,主要包括铁的转运载体二价金属离子转运蛋白1(DMT1)、钙离子通道(电压门控钙通道(VGCC)、瞬时感受器电位(TRP)和钙库调控的钙通道(SOC))以及锌铁调控蛋白ZIP家族中的ZIP8和ZIP14等,且不同的机体细胞镉吸收所需转运载体不同。转运载体对镉离子的转运符合米氏方程,不同载体调节镉吸收的米氏常数Km值不同。机体细胞镉的吸收是个复杂的过程,通常存在着多种转运载体的交互作用,机体细胞可根据环境变化而选择镉的转运载体。对镉的生理毒性,以及细胞镉吸收常用的转运载体类型加以阐述,并分析了不同机体细胞镉吸收的可能转运载体,以期为后续探究机体细胞镉吸收具体分子机制提供理论指导。     

干旱内陆河流湿地景观破碎化模型构建与尺度分析——以黑河中游湿地为例

尺度的选择一直是地理学及景观生态学的研究重点和热点。在遥感和GIS的支持下,以黑河中游湿地为例,利用移动窗口技术和空间形态学准则构建湿地类型变化追踪模型;利用面积频率统计法、卡方分布归一化尺度方差、分维数距平和多样性指数探讨干旱内陆河流湿地类型变化追踪模型的适宜和最佳窗口尺度。结果表明：1）类型变化追踪模型能实现基于像元的湿地景观空间格局分析,弥补传统湿地景观破碎化研究主要基于景观和斑块类型水平尺度,难以深入解析湿地空间演变过程的不足;2）黑河中游湿地类型变化追踪模型的适宜窗口尺度为150 m×150 m~450 m×450 m,最佳窗口尺度为250 m×250 m。该结果是进一步研究黑河中游湿地空间破碎化特征的基础,同时对于丰富干旱内陆河流湿地景观破碎化研究尺度选择有一定积极作用。     

Neighborhood form and CO2 emission: evidence from 23 neighborhoods in Jinan, China

To understand the household C02 emission level in China, as well as how much the neighborhoods＇ socio-economic or design factors could influence the CO2 emission, 23 neighborhoods in Jinan were investigated in 2009 and 2010. These neighborhoods fall into four different types： superblock, enclave, grid and traditional. The household CO2 emission includes sources of both in- home energy use and passenger transportation. The average CO2 emission per household is 7.66 t.a^-1, including 6.87 t in-home operational emission and 792 kg transportation emission. The household CO2 emission by neighborhood categories is 10.97, 5.65, 6.49, 5.40 t-household-1. a-1 for superblock, enclave, grid and tradi- tional respectively. Superblock has the highest average emission and also the highest percent （more than 25%） of transportation emission among four different types of neighborhoods. The residential CO2 emission of superb- lock neighborhoods in Jinan has already reached the level in developed countries nearly ten years ago. It is predictable that more superblock neighborhoods would be built in China with the fast urbanization. How to avoid the rapid household CO2 emission growth in the future would be a systematic issue. The study also found that in addition to income and apartment area, household density, land use mix and accessibility to public transportation are three primary factors which have significant impacts on CO2 emission. High density, mixed land use and convenient accessibility to public transportation tend to reduce household CO2 emission.     

宝钢特种设备计算机管理系统的研究与应用

简述了宝钢特种设备安全管理理念,提出了宝钢特种设备计算机管理系统的总体思路,并对该系统的应用作了一定描述。