Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

Removal of famoxadone,fluquinconazole and trifloxystrobin residues in red wines: Effects of clarification and filtration processes

The effects of six clarification agents [egg albumin, blood albumin, bentonite + gelatine, charcoal, polyvinylpolypyrrolidine (PVPP) and silica gel] on the removal of residues of three fungicides (famoxadone, fluquinconazole and trifloxystrobin) applied directly to a racked red wine, elaborated from Monastrell variety grapes from the D.O. Region of Jumilla (Murcia, Spain) were studied. The clarified wines were filtered with 0.45 μ m nylon filters to determine the influence of this winemaking process in the disappearance of fungicide residues. Analytical determination of fluquinconazole and trifloxystrobin was performed by gas chromatography with electron captor detector (ECD), while that of famoxadone using an HPLC equipped with a diode array detector (DAD). Generally, trifloxystrobin is the fungicide that is the lowest persistent one in wines, except in the egg albumin study whereas, the most persistent one is fluquinconazole. The elimination depends on the nature of the active ingredient, though the water stability in the presence of light within it has more influence than the solubility and polarity of the product itself. The most effective clarifying agents were the charcoal and PVPP. The silica gel and bentonite plus gelatine were not enough to reduce considerably the residual contents in the wine clarified with them. In general terms, filtration is not an effective step in the elimination of wine residues. The greatest removal after filtration is obtained in wines clarified with egg albumine and bentonite plus gelatine, and the lowest in those clarified with PVPP.     

飞灰螯合剂中挥发性污染物的释放

采集了4个市售飞灰螯合剂样品，分析其在20，40℃下挥发性污染物的释放规律.结果表明，释放的挥发性污染物主要有甲醛、乙醛、苯、异戊醛/异丙醇、甲硫醇、乙硫醇等；其中3个螯合剂样品甲醛的释放浓度在20℃为748~1325 μg/L-螯合剂，占释放的易挥发污染物的68%~96%（质量比），在40℃为4282~6822 μg/L-螯合剂，占释放的易挥发污染物的87%~95%（质量比）.随着温度升高，释放的挥发性污染物种类变多，部分污染物浓度增加，40℃时，4个螯合剂样品释放的易挥发污染物浓度比20℃时增加了142%~444%.元素分析、拉曼光谱和热重分析结果表明，4个螯合剂的主要有效成分相似，为二硫代氨基甲酸盐类物质.因此，推测这种飞灰螯合剂在稀释和飞灰稳定化过程中，对工作人员的健康可能有潜在的危害风险，应收集释放的气体并进行处理；且在飞灰填埋过程中，可能会导致渗滤液中NH₄⁺-N等物质的浓度升高，增加渗滤液的处理难度.     

Toxicity of the nerve agent tabun to Daphnia magna, a new experimental species in military toxicology

Daphnia magna, a freshwater microcrustacean, is currently tested as an alternative experimental species in research dealing with nerve agents poisonings treatment. Because of this, the toxicity of the nerve agent tabun (a cyanide-group containing organophosphate) to Daphnia had to be examined by estimating the EC₅₀ values. The immobilization of daphnids was chosen as the end-point. It was found that D. magna is sensitive to small amounts of tabun, even after 15 min exposure, and tabun toxicity increases with time. The estimated EC₅₀ values for 15, 30, 45, and 60 min exposure were as follows: 67.39, 38.10, 26.95, and 21.9 μg l^-1. In addition, the toxicity of media to which tabun was added 24 h before the start of experiments was examined. The results obtained indicate that daphnids can be used in experiments with nerve-agent intoxication treatment.     

某市区重点行业职业病危害因素现状调查研究

对某市区重点行业15家企业职业病危害因素进行检测与评价,对普查结果进行综合分析。结果表明:15家企业工作场所化学有害因素职业卫生现状情况良好,但噪声危害程度较大;在6个重点行业中,电子制造行业有害因素合格率最低,为84%,其次是纺织行业,有害因素合格率为85%,其他化学原料及化学制品、化工、木制家具、石材加工四个行业合格率均较高;市直以上企业职业卫生现状情况优于区属企业,300-2000人之间较大规模的企业职业卫生现状情况优于300人以下的企业。同时,对企业提出了职业危害现状的改进措施与建议。     

相转移催化合成新型含硫氧螯合树脂

1　IntroductionAseveryoneknown ,chelatingresincontainingheteroatomsuchassulfur,nitrogen ,andoxygenpossessexcellentadsorptionandselectivitypropertiesformetalions,especiallyfornoblemetallicions.Therefore ,manyeffortshavebeendonetopreparetheabove mentionedre…     

带希夫碱和酰肼基团的壳聚糖螯合树脂的合成及其吸附性能

本文利用壳聚糖Ｃ２位上活泼氨基与水杨醛进行大分子反应，再以环硫氯丙烷作交联剂，合成了带有邻羟基希夫碱基团的交联型壳聚糖螯合树脂；利用带有游离氨基的交联壳聚糖与丙烯腈进行大分子反应，合成了带有氰基的功能聚合物，再由ＣＴ－ＣＮ与水合肼进一步反应，制得了带有酰肼基轩物壳聚糖螯合树脂。     

含铬电镀废水的资源化处理

针对电镀厂产生的高浓度含铬废水,研究了硫化钠还原沉淀法回收电镀废水中的铬的可能性。讨论了pH、投药量、反应时间和搅拌速率等变量对铬回收效果的影响。结果表明:在pH1.6,工业硫化钠(60%)投加量为4.0g/L废水,搅拌速率170r/min和反应时间t=90min的条件下能够将原水中初始浓度为533.1mg/L的三价铬C(rⅢ)和530.0mg/L的六价铬[C(rⅥ)]分别降到42.9mg/L和0.01mg/L。此时铬渣中三氧化二铬(Cr2O3)含量为29.5%,满足回用要求。接下来,为了进一步去除残余的三价铬C(rⅢ),利用正交试验设计讨论了重金属捕集剂(FZ)对其去除的最佳条件。在上述条件下出水中总铬(TCr)浓度最终降到0.94mg/L。     

焚烧飞灰卫生填埋共处置的螯合稳定化技术研究

对4种垃圾焚烧飞灰的性质进行了分析,其主要元素以Si、Ca、Al、Cl等为主,此外还含有相当数量的重金属如Pb、Zn、Cu、Cr、Cd等,存在很大的环境风险.而飞灰进入卫生填埋场进行共处置是现实可行的出路,为保证共处置的安全性,针对共处置情景制订的浸出毒性浸出方法提高了浸取液酸强度(0.3 mol·L-1,以H 计),此浸出方法已于2007-05-01日开始执行.采用二硫代氨基甲酸盐(dithiocarbamate)类螯合剂对焚烧飞灰进行了稳定化处理工艺实验,结果表明,DTC类螯合剂通过螯合反应作用于飞灰中的重金属,当DTC类螯合剂投加量为3%(质量分数)时,4种飞灰中重金属的浸出值均能达到在卫生填埋场和垃圾进行共处置的要求.