Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

环境影响评价有效性评估理论研究

结合系统工程理论，初步建立环境影响评价有效性评估的概念方法和理论体系，据此对我国环境影响评价有效性进行初步评估，并提出进一步提高我国环境影响评价有效性的对策及建议。     

碎砖骨料再生混凝土配合比研究

用正交法试验分析了碎砖骨料混凝土的配合比，提出水灰比和碎砖骨料掺量分别是影响混凝土强度和流动性的主要因素。倡导用碎砖做混凝土骨料，保护生态环境。     

硫代氨基甲酸盐提取工业废水中的锌离子

本文主要探索了金属离子络合剂———硫代氨基甲酸盐的合成制备 ,并通过其对锌离子的络合作用 ,以达到脱除金属离子的目的 .实验表明 ,由吗啡啉合成制得的硫代氨基甲酸盐 锌离子络合剂在酸性废水中 ,对锌离子具有良好的络合能力 .通过对废水中金属锌离子的脱除工艺条件的相应探索 ,发现在体系的pH =2～ 6范围内 ,硫代氨基甲酸盐对锌离子的脱除率均达99 %以上     

水环境化学作用CAI课件的制作

计算机辅助教学CAI（Computer-Assisted Instruction)是现代计算机技术发展与教学内容相结合的产物。本文主要介绍了计算机辅助教学CAI课件的优点和特点。详细说明了水环境化学作用CAI课件的制作过程，探讨了具体制作一个CAI课件的流程。     

Domestic UNFCCC Kyoto Protocol Mechanisms Project Supply Coordination Through Tendering – Lessons from the New Zealand Experience

A United Nations Framework Convention on Climate Change (UNFCCC) Joint Implementation (JI) host country has to make sure that JI projects are additional to avoid extra costs to generate the reductions necessary to cover the deduction of Emission Reduction Units (ERUs) from the country’s Kyoto Protocol emissions budget. A tender of ERUs by the government allows to generate additional reductions beyond the ERUs issued if it thoroughly checks project additionality. The government of New Zealand is running a tender for JI projects under the title “Projects to Reduce Emissions” since 2003. In two rounds, 10 million ERUs have been awarded and several projects have already entered into contracts with European buyers. The ratio of ERUs awarded to reductions achieved was 0.8 in the second tender. However it remains to be seen whether the additionality test of this tender is sufficient to exclude clearly non-additional projects.     

氧化沟在炼油污水处理中应注意的几个问题

通过对氧化沟工艺处理炼油污水效果的分析，提出影响处理效果的各种因素，并探讨对策及建议。     

超临界水处理有机废物研究新进展

超临界水处理废物以通过添加氧化剂的超临界水氧化和不加氧化剂的超临界水萃取两种方式实现，超临界水氧化应用较多，与其它废物处理技术相比有显著优点。本文总结了超临界水氧化流程和反应机理，评述了添加剂，温度，压力及停留时间，催化剂等对超临界水氧化反应的影响，同时介绍了超临界水氧化和超临界水萃取的最新应用研究状况及尚需解决问题。     

提高酚氰废水生化处理工艺的效率

主要介绍了投加葡萄糖类物质显著提高煤气厂酚、氰废水生化处理装置效率的情况 ,并对其机理进行了分析探讨     

曲霉对水中重金属的吸附去除

利用2种曲霉A.sojae M146和A.oryzae M149的菌体，作为吸附剂对水中Pb^2＋和Cd^2 进行去除实验。结果表明，曲霉菌体的最佳培养时间为72h，吸附的最佳pH为5．5、温度为30℃、时间为1h。在最佳实验条件下，A.sojae M146对Pb^2 和Cd^2 的吸附率，分别为69．76％和72．28％；A.oryzae M149对Pb^2 和Cd^2 的吸附率，分别为60．64％和81．34％。使用稀碱溶液对曲霉菌体进行浸泡预处理后，可提高对重金属的吸附去除效果；而使用稀释、乙醇水溶液以及蒸馏水对菌体浸泡后，明显降低了重金属的去除效果。Na2CO3和EDTA溶液，可以有效地将重金属从曲霉体上解吸下来，从而达到重复利用菌体作为吸附剂的目的。