Prediction of Leachate Level in Kimpo Metropolitan Landfill Site by Total Water Balance

Kimpo metropolitan landfill has received various kinds of wastessince January 1992. The leachate level was measured to be 10.3 m in May 1995 and the level increased to 12.2 m in August 1996. Therefore, to prove the reason for the increasing leachate level, we calibrated hydraulic conductivity of each waste andintermediate layer using the HELP (Hydrologic Evaluation ofLandfill Performance) model. The leachate generation data measured from February 1993 to October 1995 was used in the model calibration. As a result of a model calibration, we obtained anaverage infiltration ratio and used this in analysis of the total water balance to predict elevation of leachate level. Main causes of the elevation of the leachate level were the high water content of the waste and the degradation of the leachate-drainage system caused by the subsidence of a naturalbarrier layer.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

固相萃取-气质联机测定水中嗅味物质2-甲基异茨醇和土霉素

分别利用固相萃取剂XAD-2树脂和C18SEP柱富集,二氯甲烷洗脱,固相萃取装置浓缩,通过气质联机(GC/MS)测定了水中土霉化合物MIB和Geosmin。该方法重现性好,相对标准偏差5.4%~7.0%,回收率80%~92%,MIB和Geosmin检出限分别为5ng/L和2ng/L。两种固相萃取剂对MIB和Geosmin吸附效率相当,吸附效率不受嗅味物质浓度影响,但当水溶液中其它有机质增多时,C18SPE的回收率明显下降。利用该方法对不同培养时间的放线菌代谢产物进行了测定,培养25天后代谢产物MIB和Geosmin的浓度达到200ng/L和130ng/L。     

高效液相色谱法测定饮用水中的微囊藻毒素RR和LR

利用高效液相色谱法(HPLC)测定了藻毒素(MC-RR、LR)标准样品,并绘制了标准曲线,藻毒素浓度在0~5mg/L范围内,HPLC峰面积与藻毒素进样量呈线性关系,RR和LR相关系数分别为0·9986和0·9992,表明该方法可靠、灵敏度较高。对毒素的富集方法及分析条件进行了优化,并在藻类高发期的7~10月份,通过固相萃取(SPE)法对T市饮用水中的MCs进行浓缩富集后,用高效液相色谱仪和标准曲线测出MC-RR和MC-LR值。结果显示,T市高藻期饮用水中含有MCs,应引起足够的重视。     

灰色系统模型GM（1,1）在大气环境浓度预测中的应用

运用灰色系统理论，结合实例详细介绍了ＧＭ（１，１）模型在大气环境浓度预测中的应用。     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。     

乌鲁木齐市新市区大气气溶胶中多环芳烃的GC/MS分析

采用气相色谱-质谱联用技术(GC/MS)分析测定了乌鲁木齐市新市区的大气气溶胶样品16种EPA优控多环芳烃(PAHs)的含量。通过索氏提取气溶胶样品,抽提物经硅胶层析柱分离,使用16种多环芳烃混合标准样品绘制标准曲线,以外标法对PAHs进行定量分析,并根据所得数据浅析了多环芳烃污染来源。结果表明,乌鲁木齐市新市区大气中由于汽车尾气排放和煤的燃烧造成的多环芳烃污染均存在。     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Geostatistical Uncertainty Modelling for the Environmental Hazard Assessment During Single Erosive Rainstorm Events

This paper presents an environmental hazard assessment to account the impacts of single rainstorm variability on river-torrential landscape identified as potentially vulnerable mainly to erosional soil degradation processes. An algorithm for the characterisation of this impact, called Erosive Hazard Index (EHI), is developed with a less expensive methodology. In EHI modelling, we assume that the river-torrential system has adapted to the natural hydrological regime, and a sudden fluctuation in this regime, especially those exceeding thresholds for an acceptable range of flexibility, may have disastrous consequences for the mountain environment. The hazard analysis links key rainstorm energy variables expressed as a single-storm erosion index (EI_sto), with impact thresholds identified using an intensity pattern model. Afterwards, the conditional probabilities of exceeding these thresholds are spatially assessed using non-parametric geostatistical techinques, known as indicator kriging. The approach was applied to a test site in river-torrential landscape of the Southern Italy (Benevento province) for 13 November 1997 rainstorm event.     

空气中多氯联苯的定量研究

使用大流量采样器,分别以石英纤维滤膜(QFF)和聚氨基甲酸乙酯泡沫(PUF)对空气中颗粒相和气相PCBs进行采集。以GC/MS为检测手段,采用选择性离子检测技术(SIM)对PCBs进行定性,内标法结合响应因子法进行PCBs的定量。PCBs的仪器检测限为4.40~93.60pg,回收率为68.57%~121.28%。气相和颗粒相PCBs的方法检测限分别为2.36~381.75fg/m3和2.78~348.81fg/m3。吸附和穿透试验结果表明,在采样流速为0.23m3/min、采样时间为24h的条件下,吸附和穿透情况对空气中PCBs的定量不会产生显著影响。