Novel eco-friendly spherical porous adsorbent fabricated from Pickering middle internal phase emulsions for removal of Pb(II) and Cd (II)

Spherical porous materials prepared from the emulsion template used in the water treat-ment have displayed a vast prospect,as the high surface area,abundant porous structure,convenient operation and excellent adsorption performance.But the tedious fabrication process,high consumption of organic solvent and surfactant limited the application widely.Herein,a facile and eco-friendly spherical porous adsorbent (SPA) is fabricated from the green surfactant-free (corn oil)-in-water Pickering medium internal phase emulsions (Pick-ering MIPEs) via the convenient ion crosslinking procedure.The Pickering MIPEs synergis-tically stabilized with the semi-coke (SC),which is the natural particle produced from the shale oil distillation,and sodium alginate (SA) has excellent storage and anti-coalescence stability.The as-prepared porous adsorbent possessed the abundant pore structure,which provided favorable conditions for effective mass transfer in adsorption,and could be tuned by varying the SA dosage.The saturation adsorption capacities of Pb(Ⅱ) and Cd(Ⅱ) can be achieved with 460.54 and 278.77 mg/g within 45 min at 25℃,respectively.Overall,this study supplied a viable and eco-friendly route for fabricating the spherical porous adsorbent with a tunable porous structure for heavy metal ion wastewater.     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

Chloride Released from Three Permeable Pavement Surfaces after Winter Salt Application

Few studies exist on how chloride from chloride‐based deicers is transported in infiltration‐based stormwater control measures. In 2009, the U.S. Environmental Protection Agency (USEPA) constructed a 0.4 ha parking lot in Edison, New Jersey, that was surfaced with permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA). Each surface type has four equally sized, lined sections that direct all infiltrate to separate 5.7 m³ collection tanks. The USEPA acute criterion for aquatic life (860 mg/l) was exceeded in events immediately following a snow event. Concentrations of the infiltrate exceeded the detection limit (5 mg/l) year round but did not exceed the USEPA chronic toxicity (230 mg/l) after April. The chloride concentration decreased with cumulative rainfall since previous snow event, and a power regression described this relationship. In the power regression, the coefficient (b) described the initial concentration following a snow event, and the exponent (m) described the rate in which chloride was flushed through the system with infiltrating water. PC had the largest coefficient (5,664) and largest absolute exponent (?0.92), followed closely by PICP (b = 4,943 and m = ?0.87), and distantly by PA (b = 2,907 and m = ?0.67). The differences in release rate were proportional to the measured surface infiltration rates of 4,000; 2,400; and 200 cm/h for PC, PICP, and PA, respectively. These results will assist those who manage or regulate stormwater where receiving waters are chloride impaired.     

Oxidative stress and genotoxicity of 1-methyl-3-octylimidazolium chloride on loach (Misgurnus anguillicaudatus)

This study was a preliminary step to evaluate the acute toxicity of 1-methyl-3-octylimidazolium chloride ([C₈mim]Cl) on loach (Misgurnus anguillicaudatus) by determining the effects on hepatic antioxidant enzyme activities and by the comet assay. The results showed that [C₈mim]Cl had acute toxicity at concentrations above 20 mg L^?1, inducing oxidative stress and genotoxicity on fish liver cells. In respect to enzyme activities, [C₈mim]Cl induced changes in the activities of superoxide dismutase, catalase, and glutathione content the livers of fish exposed at 20–80 mg L^?1. [C₈mim]Cl at the same exposure level caused a remarkable increase in malondialdehyde level. The comet assay indicated that [C₈mim]Cl at 20–80 mg L^?1 induced genotoxicity in liver cells. With increased exposure concentration and time, the two comet parameters trailing rate and tail moment were significantly increased, with significant differences (P < 0.05) observed between control group and each treatment group. The present study shows that ionic liquids can be a threat to the health of aquatic organism when accidentally released to aquatic ecosystems.     

Ion movements in the nervous system of the American cockroach,periplaneta Americana (L.), influenced by toxaphene

Abstract

The effect of toxaphene upon ion fluxes of the central nervous system (CNS) of the cockroach, Periplaneta americana (L.), was studied in vitro. The CNS, divided into three sections (brain, thoracic, and abdominal), was exposed to 10 M toxaphene in saline containing ²⁴Na⁺, ⁴²K⁺, ³⁶Cl^‐, or ⁴⁵Ca⁺⁺. Uptake and efflux of these ions were evaluated. Toxaphene was responsible for significant increases in the internal levels of ⁴²K⁺ and ⁴⁵Ca⁺⁺, but had little affect upon Na or ³⁶Cl^‐ movements. The resulting concentration changes of the ions may be involved in the neural activity observed with toxaphene poisoning. Of the three CNS sections, significant changes were more numerous and occurred earlier in abdominal sections.     

聚合氯化铝与三氯化铁混凝剂在常规水处理中的运用

通过聚合氯化铅与三氯化铁在常规水处理的生产性实验，从经济成本、水质指标和实际使用存在的问题对其进行分析比较，并比较了两种混凝剂在常规水处理中的优缺点。     

发酵稻壳对亚铁离子和硫离子的吸附-解吸附特性

为了解发酵稻壳对Fe2+和S2-离子的固定潜力,采用静态批式法研究了发酵稻壳对Fe2+和S2-离子的吸附行为,探讨了反应时间、溶液中Fe2+和S2-浓度、溶液p H、吸附反应环境温度及溶液离子强度对发酵稻壳吸附Fe2+和S2-特性的影响,并进一步通过解吸附试验了解发酵稻壳吸附态Fe2+和S2-的稳定性.结果表明,发酵稻壳吸附Fe2+(r=0.912 1)和S2-(r=0.901 1)的动力学过程均符合Elovich动力学模型,且Fe2+(R2=0.965 1)和S2-(R2=0.936 6)的等温吸附特征可较好地用Freundlich等温吸附模型描述.发酵稻壳对Fe2+和S2-的吸附为非优惠型吸附,其中对Fe2+的吸附为非自发反应,对S2-的吸附为自发反应.发酵稻壳对Fe2+和S2-的吸附过程是一吸热过程,升温有利于吸附作用的进行,发酵稻壳对Fe2+的吸附主要为配位吸附,而对S2-的吸附主要为阴离子交换吸附.一定p H范围内(1.50~11.50)发酵稻壳吸附Fe2+和S2-具有较强的适应性.同时随着离子强度的增加发酵稻壳对Fe2+的吸附量有所增加,而对S2-的吸附量略有减少,进一步证明发酵稻壳对Fe2+的吸附以内层配位为主,对S2-的吸附以外层络合为主.此外,不同p H条件及离子强度下发酵稻壳吸附的Fe2+和S2-解吸率很低,解吸率均小于10.00%.上述结果说明,发酵稻壳对Fe2+和S2-具有较好的吸附能力和环境适应性,吸附态Fe2+和S2-稳定性好,不易再释放.     

玉米秸秆生物炭改善污泥脱水性能

本实验以玉米秸秆为原料,制备了生物炭和AlCl₃改性生物炭,研究了2种生物炭分别调理污泥后的脱水效果,并探讨了污泥脱水性能的改善机理.结果表明,经过2种生物炭调理后,污泥比阻（SRF）、泥饼含水率（MC）、污泥沉降体积指数（SV₃₀）、毛细抽吸时间（CST）均下降,污泥净产率（Y_N）升高,说明污泥脱水性能得到了改善,且AlCl₃改性生物炭对污泥脱水性能的改善效果明显优于生物炭.当AlCl₃（溶液浓度3mol/L）改性生物炭的用量为3g/L时,调理后的污泥SRF,MC,SV₃₀,CST分别降低至1.3×10¹²m/kg,81.9%,78.6%,35s,Y_N增加至17.8kg/（m²·h）.分析原因：一方面,经过生物炭调理后,泥饼中会形成一定的骨架结构,使得污泥中的水和EPS能够更容易地释放;另一方面,经过AlCl₃改性后,改性生物炭携带的正电荷（Al³⁺）能够与污泥颗粒所带的负电荷发生电中和作用,使得污泥颗粒更容易聚集,从而提高污泥的脱水效果.     

铜胁迫对黄芪幼苗的生理学毒性与凹凸棒黏土的缓解作用

为探究黄芪幼苗对铜离子（Cu²⁺）胁迫的耐性机理以及凹凸棒黏土对Cu²⁺污染的缓解作用,研究了不同浓度CuSO₄（2~20mmol/L）胁迫对黄芪幼苗的生理学毒性与凹凸棒黏土的缓解作用.结果表明,2mmol/L CuSO₄胁迫使得根系Cu²⁺含量、H₂O₂（过氧化氢）含量、MDA（丙二醛）含量分别较对照显著上升1.82倍、1.04倍、2.14倍.CuSO₄胁迫浓度达8mmol/L时,根系SOD（超氧化物歧化酶）活性、根尖膜损伤程度和叶片Cu²⁺含量分别较对照显著上升1.13倍、1.12倍和2.62倍;同时,叶片PS Ⅱ（光系统II）实际光化学效率[Y（II）]、光化学淬灭系数（qP）、PSⅡ电子传递速率（ETR）和叶绿素含量较对照分别显著降低22.88%、24.44%、21.49%和28.31%,而NPQ和qN（非光化学荧光猝灭系数）则较对照分别显著上升2.35倍和1.58倍.根系POD（过氧化物酶）和CAT（过氧化氢酶）活性、可溶性糖和可溶性蛋白含量在8mmol/L CuSO₄处理下达到最高值后呈下降趋势.CuSO₄浓度为15~20mmol/L时,根系APX活性和叶片光适应下PS II潜在最大光化学效率（F_v'/F_m'）,以及幼苗全株鲜重、全株干重、地下部鲜重、地下部干重较对照显著下降.在非CuSO₄胁迫条件下,基质中凹凸棒黏土的存在使得幼苗根系MDA含量较对照显著降低15.93%,但未对其它所测生理学指标产生显著影响;在20mmol/L CuSO₄胁迫条件下,基质中凹凸棒黏土的存在使得幼苗根系和叶片中Cu²⁺含量分别显著下降30.78%和23.12%;同时显著缓解了20mmol/L CuSO₄胁迫对根系活性氧水平、抗氧化酶活性、膜脂质过氧化程度、根尖膜损伤程度、可溶性蛋白和可溶性糖含量,叶片PS II光化学活性和叶绿素含量的不良影响,以及对幼苗生长的抑制作用.研究结果表明,培养基质中凹凸棒黏土的存在能够显著降低幼苗组织中Cu²⁺的生物有效性,继而缓解CuSO₄胁迫对黄芪幼苗的生理学毒性作用.     

电弧离子镀HY11涂层的1200℃高温氧化行为研究

目的研究真空电弧镀方法制备的超高温金属涂层HY11在1200℃下的高温氧化行为。方法用真空电弧镀技术(AIP)在单晶镍基高温合金DD6上制备超高温金属涂层HY11,采用HB 5258循环氧化方法进行1200℃循环氧化试验,通过试验过程中试样质量变化评价涂层氧化寿命。通过扫描电镜(SEM)分析氧化后的试样显微形貌,用X-射线衍射仪分析涂层材料的相结构,通过氧化速率对涂层材料抗氧化性能进行表征。结果采用单靶真空电弧镀技术制备的HY11涂层,经过1050℃真空条件下扩散2h,涂层厚度为50～60?m,扩散区厚度为10～15μm,涂层微观组织均匀致密,涂层合金界面清晰平整。DD6合金的1200℃循环氧化寿命仅仅为4 h,HY11涂层在1200℃的循环氧化寿命近300 h。沉积态涂层HY11相结构主要以Al_2O_3和Ni3Al为主。氧化后涂层材料表面形成的氧化膜以Al_2O_3为主。结论 HY11涂层在1200℃的循环氧化寿命为298 h,极大地提高了DD6合金在1200℃的循环氧化寿命。