Rapid degradation of hexachlorobenzene by micron Ag/Fe bimetal particles

The feasibility of the rapid degradation of hexachlorobenzene (HCB) by micron-size silver (Ag)/iron (Fe) particles was investigated.Ag/Fe particles with different ratios (0,0.05%,0.09%,0.20%,and 0.45%) were prepared by electroless silver plating on 300 mesh Fe powder,and were used to degrade HCB at different pH values and temperatures.The dechlorination ability of Fe greatly increased with small Ag addition,whereas too much added Ag would cover the Fe surface and reduce the effective reaction surface,thereby decreasing the extent of dechlorination.The optimal Ag/Fe ratio was 0.09%.Tafel polarization curves showed that HCB was rapidly degraded at neutral or acidic pH,whereas low pH levels severely intensified H2 production,which consumed the reducing electrons needed for the HCB degradation.HCB degradation was more sensitive to temperature than pH.The rate constant of HCB dechlorination was 0.452 min-1 at 85℃,50 times higher than that at 31℃.HCB was degraded in a successive dechlorination pathway,yielding the main products 1,2,4,5-tetrachlorobenzene and 1,2,4-trichlorobenzene within 2 hr.     

污水快速渗滤处理系统对某些微量有机污染物的净化

利用室内大型土柱对ＲＩ系统中微量有机化合物氯仿,四氯化碳,三氯乙烯及苯,甲苯的净化过程进行了模拟研究,结果表明,系统对３种氯化脂肪烃具有很好的净化效果,其浓度可从２０００－６０００μｇ／Ｌ降至１００μｇ／Ｌ以下,系统对苯甲苯的净化则与淹水时间有关,淹水初期净化效果良好,其浓度可从进水时１０００－１７００μｇ／Ｌ降至１００μｇ／Ｌ以下,但随着淹水时间延续,净化效果变差,直至出水浓度与进水浓度基本相同     

我国木器涂料及汽车涂料中挥发性有机物特征

目前,工业源有机溶剂相关的实测型研究在我国鲜见报道,为摸清我国工业源有机溶剂挥发性有机物(volatile organic compounds,VOCs)含量及物种情况,提供建立我国工业源有机溶剂使用源排放清单所需的排放因子,选取我国用量均高居全球第一的木器涂料及汽车涂料开展研究.通过到企业采样及市场购买等途径获取涂料样品,按国内涂料相关标准检测方法进行测定,获取涂料中VOCs含量及成分谱,并计算其臭氧生成潜势(ozone formation potential, OFP).结果表明,在木器涂料中,溶剂型、水性和光固化(ultra-violet, UV)涂料的平均VOCs含量(质量分数)分别为37.28%、 9.88%和18.02%.汽车涂料中,水性原厂漆、溶剂型原厂漆、水性修补漆和溶剂型修补漆的平均VOCs含量分别为15.06%、 59.90%、 11.79%和54.50%.不同种类的涂料VOCs含量差异巨大.水性涂料的主要组分及OFP贡献者为醇醚类,溶剂型涂料的为苯系物及酯类,UV涂料的为酯类和醇醚类.涂料样品的均值均可满足现行强制性国家标准,但存在12%的溶剂型木器涂料样品和42...     

水中氯代酸性除草剂衍生气相色谱法主要要素探讨

建立了衍生气相色谱-负化学源质谱检测水中氯代酸性除草剂的方法,从四个方面对氯代酸性除草剂衍生气相色谱法中主要要素分析:针对不同需求选择确定萃取模式、萃取溶剂、酸度、浓缩方式等;对不同衍生方式进行比较,分析了辅助条件的必要性;针对衍生产物的不同选择离子源;标准物质的合理使用。     

Chlorinated Hydrocarbons in Surface Sediments From the Open Adriatic

This paper presents the results of the examination of concentrations of chlorinated hydrocarbons in surface sediments from the middle of the Adriatic. the sampling area was chosen as part of the protection programme of the Adriatic Sea and is located at two transverse transects, each consisting of four stations. the sediments were collected during the summer cruise of 1990. Quantification of individual components was performed by Capillary Gas Chromatography (CGC) using reference standards. Areal distribution of the concentrations of HCB, lindane, DDT and its metabolites, dieldrin, endrin and PCBs are presented. the values obtained varied within a wide range of concentration from 20 pg/g dry weight for lindane to 700 pg/g dry weight for Σ DDT and the sum of PCBs as Aroclor 1254 from 0.3 to 6.6 ng/g.

The main source of these compounds is thought to be from suspended matter entering the Adriatic sea via the River Po and transported by currents to its middle part.     

Electrochemical reduction characteristics and the mechanism of chlorinated hydrocarbons at the copper electrode

The electrochemical reduction characteristics of chlorinated hydrocarbons were investigated by cyclic voltammetry technique. The reduction mechanism and activity of the chlorinated hydrocarbons at the copper electrode were explored. The relationship between the structure of chlorinated hydrocarbons and their reductive activity were discussed. The experimental results showed that chlorinated alkanes and a portion of chlorinated aromatic hydrocarbons could be reduced directly at the copper electrode. However, chlorinated aromatic hydrocarbons were not easy to reduce at the copper electrode. The results provided a theoretical basis for the catalyzed iron inner electrolysis method. Translated from Environmental Science, 2005, 26(4): 51–54 [译自: 环境科学]     

Chlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins and dibenzofurans in the baltic herrinj and sprat of estonian coastal waters

BACKGROUND, AIMS AND SCOPE: The concentration of chlorinated dibenzo-p-dioxins and dibenzofurans in many fish from the Baltic requires monitoring, since it approaches or exceeds the European Union threshold limit value of 4 pg TEQ/g wet weight of fish for human consumption. The concentrations, expressed in TEQs, are important for toxicology and regulations, but hide the concentrations of the individual congeners, which are important for other environmental sciences, source allocation, and for the detection of measurement errors. This report evaluates the results of a survey reported earlier only in the terms of the TEQ concentrations. METHODS: Principal Component Analysis (PCA) was used to reduce the dimensions of the data (17 = 7 chlorinated dibenzo-p-dioxin and 10 chlorinated dibenzofuran congeners) to three principal components. This facilitated the interpretation of the congener profiles. Slopes of the congener concentrations as a function of age of the fish were estimated by least squares regression. The results were compared with a large set of data for lake trout from Lake Ontario. RESULTS AND DISCUSSION: The congener profiles of Baltic herring are less scattered than those of sprat. The profiles of herring from the central Baltic differ from those of herring from the Gulf of Riga and both appear to be affected relatively minimally by the age of the fish. The congener profiles of herring from the western Gulf of Finland are similar to those from the central Baltic, those from middle Gulf of Finland are similar to those from the Gulf of Riga. Both seem to be more affected by age of the fish than the profiles of the first two groups. The concentrations of several pentachloro- and hexachloro-dibenzo-p-dioxins and dibenzofurans increase with the age of the fish CONCLUSION: PCA is a good technique for the evaluation of the congener profiles. The resulting loading and score plots provide a good graphic summary of the multidimensional data. Additional analyses are needed to confirm the observed profile patterns. A comparison with the results of a long-term monitoring from another area shows that the age of the fish is a more important factor than the year of capture. RECOMMENDATION AND OUTLOOK: The surveys should continue for a number of years and the results should be presented and evaluated both in terms of the TEQs as well as in terms of weight concentrations. Since the concentrations do not appear to change very much from year to year, it would be better to carry out surveys only every 3-4 years and, instead, stratify the sampling according to age and gender of the fish, and to analyze replicate extracts by replicate measurements. The inclusion of unmarked replicate samples would be a good quality assurance measure. It would be desirable to analyze additional parts of the food chain in order to understand the fate of the compounds in the ecosystem.     

Assessment of interfacial mass transfer in water-unsaturated soils during vapor extraction

This paper presents results of a numerical investigation of soil vapor extraction (SVE) systems at the laboratory scale. The SVE technique is used to remove volatile chlorinated hydrocarbons (VCHC) from the water-unsaturated soil zone. The developed numerical model solves equations of flow, transport and interfacial mass transfer regarding an isothermal n-component and three-phase system. The mathematical model is based on a simple pore network and phase distribution model and designed to be scaled by a characteristic length. All mathematical expressions are structured into VCHC specific and VCHC non-specific parameters. Furthermore, indicators are introduced that help to separate thermodynamic equilibrium from thermodynamic non-equilibrium domains and to determine the controlling physical parameters. For numerical solution, the system of partial differential equations is discretized by a finite volume method and an implicit Euler time stepping scheme. Computational effort is reduced notably through techniques that enable spatial and temporal adaptivity, through a standard multigrid method as well as through a problem-oriented sparse-matrix storage concept. Computations are carried out in two dimensions regarding the laboratory experiment of Fischer et al. [Water Resour. Res. 32 (12) 1996 3413]. By varying the characteristic length scale of the pore network and phase distribution model, it is shown that the experimental gas phase concentrations cannot be explained only by the volatility and diffusivity of the VCHC. The computational results suggest a sorption process whose significance grows with the aqueous activity of the less or non-polar organic compounds.     

Stable chlorine intramolecular kinetic isotope effects from the abiotic dehydrochlorination of DDT

INTENTION, GOAL, SCOPE, BACKGROUND: Identifying different sources and following reaction pathways of chlorinated organic contaminants in the environment can be challenging, especially when only their concentrations are available. Compound-specific stable chlorine measurements of some contaminants have recently been shown to provide additional information and an increased understanding of their biogeochemistry. These studies, however, have been generally limited to volatile molecules. OBJECTIVE: Here, the stable chlorine isotope ratios of the semi-volatile pesticide, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) were investigated. Specifically, the intramolecular stable chlorine isotopic compositions of DDT and the kinetic isotope effect (KIE) for the abiotic dehydrochlorination of DDT to 2,2-bis(p-chlorophenyl)-1,1-dichloroethene (DDE) were determined. METHODS: Selective chemical oxidation of DDT to dichlorobenzophenone (DCBP) and analysis of each compound was used to calculate the stable chlorine isotope ratios of the alkyl and aromatic chlorines in DDT. To determine the KIE for dehydrochlorination, DDT was reacted in a basic solution to yield DDE at 52 degrees C, 60 degrees C, and 72 degrees C for 3, 5, and 5 days, respectively. RESULTS AND DISCUSSION: Significant intramolecular stable chlorine isotopic differences were observed in one sample of DDT where the alkyl and aromatic delta 37Cl values were -5.76 +/- 0.45 and -2.21 +/- 0.24%@1000, respectively. Dehydrochlorination of DDT to DDE in basic solutions at 52, 60, and 70 degrees C resulted in a substantial intramolecular KIE where the alkyl chlorines of DDE shifted by approximately 3%@1000 relative to the alkyl chlorines in DDT. However, no temperature dependence was observed. The KIE, calculated by an iterative program, was 1.009. CONCLUSIONS: Intramolecular differences in the stable chlorine isotope ratios were observed in DDT and this is the first such finding. Dehydrochlorination of DDT yields a measurable and distinct intramolecular stable chlorine KIE. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate the existence of significant intramolecular differences in chlorinated organic compounds. Many other chlorinated semi-volatile and volatile organic contaminants are synthesized from multiple sources of chlorine, and we recommend that similar studies be performed on many such molecules in order to attain a clear understanding of their intramolecular chlorine isotopic differences. The existence of a measurable KIE for the dehydrochlorination of DDT to DDE shows the potential strength of using isotopic measurements to investigate the biogeochemistry of these important compounds. For example, the isotopically depleted aqueous chloride produced by dehydrochlorination of DDT to DDE may be a useful tracer of these reactions in freshwater environments.     

Cosolvent effects on sorption isotherm linearity

Sorption-desorption hysteresis, slow desorption kinetics, and other nonideal phenomena have been attributed to the differing sorptive characteristics of the natural organic polymers associated with soils and sediments. In this study, aqueous and mixed solvent systems were used to investigate the effects of a cosolvent, methanol, on sorption isotherm linearity with natural organic matter (NOM), and to evaluate whether these results support, or weaken, the rubbery/glassy polymer conceptualization of NOM. All of the sorption isotherms displayed some nonlinear character. Our data indicates that all of the phenanthrene and atrazine isotherms were nonlinear up to the highest equilibrium solution concentration to solute solubility in water or cosolvent ratios (Ce/Sw,c) used, approximately 0.018 and 0.070, respectively. Isotherm linearity was also observed to increase with volumetric methanol content (fc). This observation is consistent with the NOM rubbery/glassy polymer conceptualization: the presence of methanol in NOM increased isotherm linearity as do solvents in synthetic polymers, and suggests that methanol is interacting with the NOM, enhancing its homogeneity as a sorptive phase so that sorption is less bimodal as fc increases. When the equilibrium solution concentration was normalized for solute solubility in water or methanol-water solutions, greater relative sorption magnitude was observed for the methanol-water treatments. This observation, in conjunction with the faster sorption kinetics observed in the methanol-water sediment column systems, indicates that the increase in relative sorption magnitude with fc may be attributed to the faster sorption kinetics in the methanol-water systems, and hence, greater relative sorptive uptake for the rubbery polymer fraction of NOM at similar time scales.