组合式生物膜法处理炼油废水的研究

针对炼油废水成分复杂、有毒物质含量高和可生化性差的特点,采用组合式生物膜法进行处理.试验结果表明,该工艺对COD、NH3-N和挥发酚(Ar-OH)具有较好的去除效果,去除率分别为92.6%、96.5%和98.1%,达到《污水综合排放标准》(GB 8978-1996)一级标准.     

利用磷渣熔制饰面玻璃

介绍了用磷渣熔饰面玻璃的试验过程。对试验中出现的工艺问题进行了探讨,并讨论经济效益进行了初步分析。     

用磷石膏制备建筑胶结料

介绍了利用化工副产品磷石膏和高炉矿渣制备建筑胶结料的方法。重点研究了磷石膏类胶结料的配比及性能。试验结果表明,将未经处理的磷石膏和磨细的高炉矿渣、碱性激发剂和早强剂按一定比较混合可以制备出抗压强度超过40MPa的建筑胶结料。     

Characteristics of element distributions in an MSW ash melting treatment system

Thermal treatment of municipal solid waste (MSW) has become a common practice in waste volume reduction and resource recovery. For the utilization of molten slag for construction materials and metal recovery, it is important to understand the behavior of heavy metals in the melting process. In this study, the correlation between the contents of elements in feed materials and MSW molten slag and their distributions in the ash melting process, including metal residues, are investigated. The hazardous metal contents in the molten slag were significantly related to the contents of metals in the feed materials. Therefore, the separation of products containing these metals in waste materials could be an effective means of producing environmentally safe molten slag with a low hazardous metals content. The distribution ratios of elements in the ash melting process were also determined. The elements Zn and Pb were found to have a distribution ratio of over 60% in fly ash from the melting furnace and the contents of these metals were also high; therefore, Zn and Pb could be potential target metals for recycling from fly ash from the melting furnace. Meanwhile, Cu, Ni, Mo, Sn, and Sb were found to have distribution ratios of over 60% in the metal residue. Therefore, metal residue could be a good resource for these metals, as the contents of Cu, Ni, Mo, Sn, and Sb in metal residue are higher than those in other output materials.     

炉渣与生物炭施加对福州平原水稻田温室气体排放的后续影响

为了探讨炉渣与生物炭施加对稻田温室气体的排放是否具有后续效应,于2015年早、晚稻秧苗移栽前对稻田进行施加生物炭(B)、炉渣(S)和生物炭+炉渣(混施)处理(BS),以不施加处理作为对照(CK). 2 a后(2017年)在早、晚稻生长期,分别测定了不同试验组稻田温室气体CO_2、CH_4和N_2O的排放通量.结果表明,在水稻生长期,对照、生物炭、炉渣和混施处理CO_2的平均排放通量分别为(1 723. 66±194. 56)、(1 245. 52±155. 05)、(1 140. 29±79. 68)和(1 055. 83±62. 13) mg·(m~2·h)~(-1),生物炭、炉渣和混施这3种施加处理CO_2的排放通量均比对照组有显著降低(P 0. 05),降低比例分别达27. 74%、33. 84%和38. 75%. CH_4的平均排放通量为(0. 45±0. 03)、(0. 40±0. 05)、(0. 36±0. 10)和(0. 25±0. 04) mg·(m~2·h)~(-1),各处理组与对照相比均降低了CH_4的排放通量,降低比例分别为11. 11%、20. 00%和44. 44%,但未到达显著差异(P 0. 05). N_2O在不同处理组的平均排放通量为(62. 47±27. 00)、(115. 09±30. 94)、(79. 75±24. 98)和(112. 68±23. 59)μg·(m~2·h)~(-1).与对照相比,各处理组均增加了N_2O的排放通量,升高比例分别达84. 23%、27. 66%和80. 37%.全球综合增温潜势表明,施加处理增加了早、晚稻稻田生态系统的综合增温潜势.说明,炉渣和生物炭施加处理2 a之后,对减排作用效果不明显.     

一种钢渣中氯离子的测定方法

利用蒸馏装置蒸出钢渣中的氯离子,使用硝酸汞滴定方法进行滴定,选用两种钢渣,在不同实验室分别进行了分析测定的比较和验证。结果表明:该方法简便易操作,重现性和准确性都比较高,作为钢渣中氯离子的测定是可行的。     

黔西南汞铊矿废弃物中污染物释放的联合调控研究

为评价植生改良与先锋植物联合调控作用对矿产采冶废弃物中污染物迁移的控制情况,以黔西南兴仁市滥木厂大量露天堆存的汞铊矿废弃物（采冶废渣、尾矿、废石等混合物）为研究对象,选择当地广泛存在的碳酸盐岩、腐熟牛粪作为植生改良剂,并种植三叶草和黑麦草作为先锋植物进行联合调控,通过淋滤实验评价其对废弃物中高毒性污染物Hg、Tl、As和Sb释放的抑制效果。结果表明：对照组废弃物淋滤3次所得淋滤液中Hg、Tl含量平均为14.8 μg/L和170.6 μg/L,As和Sb平均为22.1 μg/L和4.9 μg/L,在雨水淋溶下具有持续释放进入环境的风险;联合调控可对废弃物中Tl和Hg的释放有明显的抑制效果,其中淋滤液Tl含量降为对照的12.2%～54.1%,10%碳酸盐岩梯度的混种组淋滤液Tl含量为19.6 μg/L,效果最好;5%、10%碳酸盐岩梯度的三叶组和混种组淋滤液中Hg含量显著低于对照水平（p<0.05）,较对照降低34.5%～47.9%;而联合调控则致使废弃物中As、Sb释放,相关性分析表明,植生改良剂添加引起的废弃物基质中溶解性有机质含量增加与植物诱导下游离氧化铁的溶解可能是导致As、Sb释放的关键因素。形态分析结果表明,联合调控促使汞铊矿废弃物中Hg、Tl向残渣态转变,而促使残渣态As、Sb占比下降导致其活化。综上,对汞铊矿废弃物采用植生改良剂-先锋植物联合调控可显著抑制Hg、Tl的释放,但需考虑所加植生改良剂中溶解性有机质增加及废弃物基质中游离氧化铁溶解引起的As、Sb活化与释放带来的环境风险。     

模拟酸雨下铅锌冶炼废渣重金属的静态释放特征

以株洲某铅锌冶炼废水中和渣为研究对象,开展不同初始pH值（3.0,4.5,5.6和7.0）模拟酸雨静态浸出实验,研究22d浸泡过程中废渣Cd、Cu、Pb和Zn等重金属的动态释放规律及其化学形态变化和矿物相变特征.结果表明,废渣具有较强的酸缓冲潜力,浸出液pH值稳定在6.20~6.66.Cu和Pb在浸泡初期释放较快,Cd和Zn释放相对较慢.浸出液Cd浓度随浸出时间增加而上升,Zn浓度呈波动变化,Cu和Pb浓度变幅较小.提高雨水酸度促进废渣中重金属的释放,浸出液Cd、Cu、Pb和Zn浓度范围分别为1.38~8.70,0~0.02,1.21~2.26和27.2~135mg/L,其中Cd、Pb和Zn浓度分别超过我国《铅、锌工业污染物排放标准》（GB 25466-2010）限值的26.6~173倍、1.42~3.52倍和17.1~89.0倍..重金属BCR顺序提取表明,浸出液中较高Cd和Zn浓度与其赋存高活性态比例一致,且酸雨促使残渣态Cd和Pb向活性态转化.XRD分析显示,pH=3.0酸雨处理22d后原废渣中Cd和Zn的赋存矿物相消失,PbSO₄谱峰增强,表明废渣重金属的释放受其赋存矿物相及次生矿物形成的影响.重金属释放率呈现出Cd （2.50%~15.8%）> Zn （0.41%~2.13%）> Pb （0.06%~0.10%）> Cu （0.0003%~0.11%）的趋势.自然堆存酸雨作用下废渣中Cd、Pb和Zn具有较大环境风险,需加强降雨淋滤污染防治管控.     

Utilisation of steel slags as neutralising agents in biooxidation of a refractory gold concentrate and their influence on the subsequent cyanidation

A study on the possibilities to utilise steel slag as neutralising agent in biooxidation of a refractory gold concentrate has been done with reference to commercial grade slaked lime. The idea has been to reduce the operating costs for neutralisation in the biooxidation plant, which is known to be the second largest operating cost. Other benefits would be savings in cost for landfilling of slag, possibilities to recycle elements present in the slag and savings of virgin limestone deposits. The slags used were an EAF slag and a slag from ladle refining; both originating from Swedish scrap based steel-making. Continuous biooxidation of the refractory gold concentrate was conducted in a single-stage 5 L reactor at a retention time of 56 h. The neutralisation capacity was determined by comparing the amount needed, per ton of feed concentrate added, to maintain the desired pH of 1.5 during steady state operation. Slaked lime had the highest neutralisation capacity with 110 kg/ton feed followed by ladle slag and EAF slag with values of 152 and 267 kg/ton feed, respectively. Sulphide mineral oxidation was similar and high in all cases although the ladle slag results were slightly better. Gold recoveries after cyanide leaching on the residues obtained were also similar and were in the range of 86-89%. However, the cyanide consumption expressed as kilogram cyanide per ton of concentrate fed to biooxidation, was double in the case of ladle slag and three times as much for the EAF slag compared to the slaked lime experiment. The increased cyanide consumption could not be explained only by the increased amount of elemental sulphur obtained in the slag experiments. The elemental sulphur formed had different reactivities as seen from the thiocyanate formation and cyanide losses due to thiocyanate formation were 16%, 32% and 40% for EAF slag, slaked lime and ladle slag, respectively. It is concluded that the ladle slag could be a possible replacement for limestone if they are mixed in proper proportions so that the microbial carbon dioxide demand is met whereas the EAF slag is less suitable due to the very fine reaction products obtained which gave operational problems with filtration and washing. To come further, experiments with the normal multi-stage biooxidation set-up with total retention time of 120 h should be performed which would increase the sulphur oxidation and eventually also reduce the cyanide consumption.     

碱性介质中还原高浓度Cr(VI)细菌的分离及其特性

目前国内外处理含铬废水的微生物仅局限于酸性或中性环境,且处理Cr(VI)的浓度仅为200mgL-1左右,难以工业化应用,尤其是不可能处理诸如铬渣渗滤液之类的碱性含铬废水及铬渣.本研究从铬渣堆埋场附近取得菌样,经富集、分离、驯化,得到能在碱性介质中高效还原Cr(VI)的无色杆菌属(Achromobactersp.)菌株,该菌为G-,具有周身鞭毛及可运动性.对其生理及还原Cr(VI)的特性进行了研究,结果表明:该菌嗜碱,好氧,耐盐及高Cr(VI),在有氧、pH为10.30、30℃等条件下,含Cr(VI)1570mgL-1的废水经该菌处理16h后浓度降至0.6mgL-1.处理后的沉淀物中铬以Cr(OH)3的非晶形态存在,其中总铬含量为21.44%,Cr(VI)检测不出,具有很大的回收价值.图4表3参16