关于“四沿”化工安全的战略性思考与探索

以基本能浓缩中国化工概貌的江苏省沿江、沿河、沿湖、沿海化工企业为背景,依据其形成和发展及基本概况,结合重大化工事故灾难,以安全与环境相耦合,对"四沿"化工安全进行了战略性思考,试图勾画临水化工本质安全的模型,提出在"四沿"地区构建化工本质安全化科技支撑体系的宏观构架,即建设"江苏省四沿区域化工本质安全和化工事故防范及应急系统"的思路、探索与实践。还提出了立法深化研究和技术标准制定、严格区域规划设计与建设的监督、强化监管执法力度等急需关注的问题。以江苏省"四沿"区域的化工安全为背景所提出的思路与对策,应该对整个华东地区乃至全国临水性化工企业安全具有重要的现实和借鉴意义,对我国高危行业的安全生产和环境保护有重大的示范效应。     

基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。     

橡胶促进剂M盐废水生物处理技术研究

为探讨微生物技术在橡胶促进剂M盐废水处理中的应用,利用高效优势蘸强化A2O工艺对橡胶促进剂M盐废水进行处理,整个系统运行过程分为污泥的培养与驯化阶段及稳定运行阶段。在稳定运行阶段COD0平均去除率达90．71％,氨氮平均去除率达78．31％。以Mn^2＋、Fe^2＋、Mg^2＋、Ni^2＋为4个影响因子,通过正交实验分析无机离子对橡胶促进剂M盐废水中有机物降解的促进作用。由实验数据的摄差大小可知,各无机离子对优势复合菌降解橡胶有机废水的影响从大到小依次为：Mn^2＋、Fe^2＋、Ni^2＋和Mg^2＋。4种离子最佳质量浓度组合为：0．500mg／L的Mn^2＋、1．00mg／L的Fe^2＋、35．0mg／L的Mg^2＋和0．025mg／L的Ni^2＋。     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Identification of Odor Causing Compounds in a Commercial Dairy Farm

The odorous air emissions from confined animal feeding operations (CAFOs), such as swine, poultry and dairy farms, are increasingly raising community complaints. Odorous emissions can result in health damages, psychological discomforts and adverse aesthetic effects in the community. However, these emissions are not well characterized up to now due to the lack of legislation, the limitations in sampling and instrumentation techniques, and the complexity of the emissions themselves. This study is aimed at the development of a high volume sampler and sorbent assembly to identify the odor causing compounds from a diary CAFO. The sorbent was custom designed to target the potential compounds that may exist in a dairy farm and was validated in laboratory with a synthetic odor from the swine manure. The actual samples at the diary farm were collected in spring and summer of 2005. The sorbents were solvent extracted and individual odor compounds were identified using GC–MS (gas chromatography–mass spectroscopy). The data obtained indicated that high volume sampling can shorten the sampling time from days to within 4 h. Both volatile organic compounds (VOCs) and volatile fatty acids (VFAs) have been identified from the dairy farm, such as phenol, methylphenol, 4-ethyl phenol, indole, methyl indole, benzyl alcohol, hexanoic acid, valeric acid and iso-valeric acid, together with some nitrogen containing compounds that have not been reported before.     

准液膜富集环境水中痕量金属离子

对准液膜法富集环境水中痕量Ｚｎ２＋、Ｃｄ２＋、Ｐｂ２＋进行了研究,此法简单、快速,富集倍数达１００倍,回收率在９５％以上。     

可持续发展的生态学思考

本文从生态学角度对可持续发展理论进行了思考。指出生态危机是可持续发展产生的基本背景;生态学中许多基本理论,如协调、适应、稳定、有序、循环再生及生态系统理论等,是可持续发展不断完善的理论基础;包括生态规划、生态技术与生态管理在内的广义生态工程,是实现可持续发展的有效途径