松花江野生鱼类重金属残留分析与评价

以松花江流域的野生鱼类为研究对象,在松花江流域选取松林、大顶子山、佳木斯3个具有代表性的点位,在2014—2016年的每年5月底6月初采集鲤鱼和鲫鱼样品,3年内共制备45个鲤鱼单样,44个鲤鱼混样,30个鲫鱼混样,共计119个。采用电感耦合等离子体-质谱法对鱼类肌肉组织中残留的As、Cd、Cr、Pb、Hg 5种重金属进行检测。检测结果显示,As、Cd、Cr、Pb、Hg 5种重金属全部检出,检测结果全部达标,达标率为100%。根据检测结果采用单因子指数法和金属污染指数法等评价了松花江流域鱼体重金属残留状况及食用安全性,评价结果为松花江流域鱼类重金属残留量相对较少,鱼体健康,食用安全。     

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

Variability of pesticide residues in cauliflower units collected from a field trial and market places in Greece

To estimate the variability of pesticide residue levels present in cauliflower units, a total of 142 samples were collected from a field trial of a cooperative farmer, and 120 samples were collected from different market places in Thessaloniki, Greece. The collected samples were extracted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction technique, and the residues were determined by liquid chromatography–tandem mass spectrometry. The developed method was validated by evaluating the accuracy, precision, linearity, limit of detection (LOD), and limit of quantification (LOQ). The average recoveries for all the analytes, derived from the data of control samples fortified at 0.01, 0.05, 0.1, and 0.2 mg/kg, ranged from 74 to 110% with a relative standard deviation of ≤8%. The correlation coefficient (R²) was ≥0.997 for all the analytes using matrix-matched calibration standards. The LOD values ranged from 0.001 to 0.003 mg/kg, and the LOQ was determined at 0.01 mg/kg for all the sought analytes. The matrix effect was found to be at a considerable level, especially for cypermethrin and deltamethrin, amounting to +90% and +145%, respectively. For the field samples, the unit-to-unit variability factors (VFs) calculated for cypermethrin and deltamethrin were 2.38 and 2.32, respectively, while the average VF for the market basket samples was 5.11. In the market basket samples, residues of cypermethrin, deltamethrin, chlorpyrifos, and indoxacarb were found at levels ≥LOQ and their respective VFs were 7.12, 5.67, 5.28, and 2.40.     

中和共沉淀—铁氧体法处理含镍、铬废水的实验研究

利用中和共沉淀—铁氧体法处理甘肃某稀有金属生产企业产生的含镍、铬废水,同时对该废水的处理工艺条件进行了实验研究。经测定,废水中Ni 2+质量浓度为50mg/L,Cr(Ⅲ)质量浓度为87mg/L。通过实验得到处理工艺的最佳条件:投料摩尔比(Fe2+/(Ni 2++Cr2O2-7))为9,pH=9,温度为70℃。出水中镍、铬均可达到《污水综合排放标准》(GB 8978—1996)中第一类污染物最高允许排放浓度的要求,为中和共沉淀—铁氧体法处理混合重金属废水的工艺条件研究提供了参考。     

改性糠醛渣吸附脱硫废水中钙离子

石灰石-石膏法烟气脱硫技术中石灰石利用率低导致钙流失严重,为实现脱硫废水中Ca2+的资源化利用,进行糠醛渣改性和Ca2+的吸附特性研究。实验结果表明,利用H3PO4改性后的糠醛渣对脱硫废水中Ca2+具有较高的吸附率;在振荡的前30 min吸附率上升极快,至90 min时基本达到平衡吸附量;对Ca2+浓度对吸附率影响研究结果表明,平衡吸附量与平衡浓度关系符合Langmuir等温吸附方程;在初始Ca2+浓度为300 mg/L的溶液中加入3 g吸附剂,温度30℃条件下振荡90 min,平衡吸附量为8.41 mg/g。     

碱熔融—微波晶化法合成粉煤灰沸石及其对Cd2+的吸附

以粉煤灰为主要原料,采用碱熔融—微波晶化法合成粉煤灰沸石。采用XRD,SEM,TEM等技术表征了粉煤灰沸石的微观结构,并对其吸附Cd²⁺的性能进行了研究。表征结果显示,粉煤灰沸石主要由X型沸石、P型沸石和铝组成,粉煤灰沸石中有排列规则、呈蜂窝状的孔穴和孔道存在,其孔穴和孔道大小分布均匀,致密。粉煤灰沸石的比表面积为108.49 m²/g,平均孔径为3.779 nm,孔体积为0.221 mL/g。实验结果表明,在溶液pH为7、吸附时间30 min的最佳吸附条件下,Cd²⁺去除率均大于94%。粉煤灰沸石对Cd²⁺的吸附可很好地用二级动力学方程进行拟合,相关系数为0.999 99。可用Langmuir等温吸附模型描述该吸附过程,该吸附过程是单分子层吸附,主要是化学吸附,粉煤灰沸石对Cd²⁺的饱和吸附量为49.261 mg/g。     

助剂作用下超声浸取电解锰渣

用8-羟基喹啉、黄原酸钾、十六烷基三甲基溴化铵、磷酸三丁酯、柠檬酸5种物质作浸取助剂,考察了助剂作用下超声辅助浸取法从电解锰渣中提取锰的工艺条件。实验结果表明：用1%（质量分数）柠檬酸作浸取助剂,在固液比（g/mL）为1∶4、酸矿比（mL/g）为0.3∶1、浸取温度为70℃的条件下,超声浸取15min,锰浸出率平均可达57.28%,是加热酸浸法锰浸出率的2.72倍,是无助剂超声辅助浸取法锰浸出率的1.52倍。     

白泥复合衬层防渗稳定性的研究

为考察白泥复合防渗衬层的防渗稳定性和对污染物的阻滞去除能力,利用自制击实渗透仪对白泥和亚粘土防渗衬层进行了对比研究. 结果表明:白泥/亚粘土“夹层结构"复合衬层能保持低于国家防渗规范(10－7 cm/s)的防渗性,并对渗滤液中的重金属,COD_Cr和NH₄＋-N具有较强的阻滞去除能力,可以与常用的亚粘土防渗衬层相媲美,不过其淋滤出水ρ(Cl－)高,因此其长期防渗稳定性需进一步研究;60%白泥+40%亚粘土“混合式"复合衬层和白泥防渗衬层在渗滤液渗透作用下,其防渗性能不好,渗透系数超过国家防渗规范要求,因此不宜用于填埋场防渗.      

焙烧温度对铁覆膜砂IOCS吸附Cr(VI)的影响

采用序批试验研究了焙烧温度对铁覆膜砂(Iron Oxide Coated Sand,IOGS)吸附6价铬Cr(VI)的吸附平衡和吸附速率的影响.结果表明,铬在IOCS上的吸附平衡符合Langmuir吸附模型.低温制备IOCS具有较高吸附容量且对pH不敏感.110℃制备IOGS在pH 7的最大吸附容量(0.181 mg·g-1)远高于660℃制备10CS(0.023 m8·8-1).吸附过程符合准二级动力学模型.吸附速率随焙烧温度提高而下降.     

臭氧法对酸性嫩黄G溶液的脱色效率和残留物的分析

实验考察了臭氧对酸性嫩黄G色度脱除和其溶液pH值的变化情况,并对降解溶液中的残留物进行定量分析。结果发现,20min时,脱色率达到97.5%;有酸性物质生成并使得溶液的pH值随反应时间的推移下降,pH与脱色率总体变化趋势一致。经反应,分子中的—SO3Na基团大部分生成了SO42-;N并没有氧化成NO2-、NO3-,而是生成其它含N化合物。