Loblolly pine response to wet-weather harvesting on wet flats after 5 years

The timing of forestry operations relative to weather conditions is a consideration in applying Forestry Best Management Practices (BMPs). Harvesting during different seasons can result in degrees of soil disturbance, the distribution of logging debris, and potentially future stand productivity. The purpose of this study is to examine the response of loblolly pine (Pinus taeda L.) stands after wet- and dry-weather harvesting combined with three site preparation treatments. A 20 × 20 meter grid was established in fifteen 20-year-old, 3.3-ha loblolly pine plantations in South Carolina. A census of soil physical disturbance and slash distribution was made after harvesting. Growth was measured on 1/125th-ha plots at ages two and five. Dry-weather harvested (DWH) sites were 91% undisturbed, and 9% compressed. Wet-weather harvested (WWH) sites were 41% undisturbed, and 59% disturbed. WWH sites averaged 9% bare soil, while DWH sites averaged 16% with 1 kg m^-2 less logging residue; primarily in the form of heavy and light slash. At age five, the green-weight biomass of flat-planted DWH and WWH sites were 13.3 and 12.6 kg tree^-1 respectively, and on the bedded DWH and WWH sites were 18.6 and 22.8 kg tree^-1. Wet weather harvesting did not seem to adversely affect stand growth, and may have improved it. Due to a prolonged drought, bedding had a larger effect on WWH sites than DWH harvested sites. The effects of droughty conditions may be influencing treatment response on these highly productive sites; however, the long-term effects of harvesting on stand growth remain to be seen.     

Sydney tar ponds: some problems in quantifying toxic waste

Information on the type and amount of hazardous and toxic waste is required to develop a meaningful strategy and estimate a realistic cost for clean up of the Sydney Tar Pond site which is located on Cape Breton, in the province of Nova Scotia, Canada. The site covers the area of the decommissioned Sysco (Sydney Steel Corporation) plant. The materials of concern include BTEX (benzene, toluene, ethylbenzene, and xylenes), PAH (polycyclic aromatic hydrocarbons), PCB (polychlorinated biphenyl), and particulates laden with toxic metals, such as arsenic, lead, and others. The originally nontoxic materials such as soil, blast furnace slag, and vegetation, as well as surface and ground waters, which were subsequently contaminated, must also be included if they fail tests prescribed by environmental regulations. An extensive sampling program must be undertaken to obtain data for an accurate estimate of the waste to be cleaned and disposed of. Apparently, 700,000 tons of toxic waste, which is believed to be present on the site, may represent only a fraction of the actual amount. The clean-up of the site is only part of the solution. Toxic waste has to be disposed of in accordance with environmental regulations.     

MPS型抑尘剂在兰尖铁矿道路的应用

通过对兰尖铁矿使用MPS型抑尘剂的概述,其良好的防尘性能、经济效益及社会效益必将为广大的市场所认同。     

SENSITWITY ANALYSIS OF SIMULATED CONTAMINATED SEDIMENT TRANSPORT1

ABSTRACT: A simulation analysis of contaminated sediment transport involves model selection, data collection, model calibration and verification, and evaluation of uncertainty in the results. Sensitivity analyses provide information to address these issues at several stages of the investigation. A sensitivity analysis of simulated contaminated sediment transport is used to identify the most sensitive output variables and the parameters most responsible for the output variable sensitivity. The output variables included are streamflow and the flux of sediment and Cs¹³⁷. The sensitivities of these variables are measured at the field and intermediate scales, for flood and normal flow conditions, using the HSPF computer model. A sensitivity index was used to summarize and compare the results of a large number of output variables and parameters. An extensive database was developed to calibrate the model and conduct the sensitivity analysis on a 6.2 mi² catchment in eastern Tennessee. The fluxes of sediment and Cs¹³⁷ were more sensitive than streamflow to changes in parameters for both flood and normal flow conditions. The relative significance of specific parameters on output variable sensitivity varied according to the type of flow condition and the location in the catchment. An implications section illustrates how sensitivity analysis results can help with model selection, planning data collection, calibration, and uncertainty analysis.     

高价值综合利用攀钢钛矿渣的途径─－利用提钛后残渣生产复合水泥与少熟料水泥

本文较系统地研究了提钛后的残渣、矿渣、熟料、激化剂等因素对复合水泥与少熟料水泥强度的影响；找出了利用提钛后的残渣生产复合水泥与少熟料水泥生产的最佳条件，并对复合水泥和少熟料水泥的性能进行了初步探索。试验数据表明，利用提钛后残渣可生产５２５￣＃复合水泥和４２５￣＃少熟料水泥，工业废渣利用率可达７０％。     

A terrain-based paired-site sampling design to assess biodiversity losses from eastern hemlock decline

Biodiversity surveys are often hampered by the inability tocontrol extraneous sources of variability introduced intocomparisons of populations across a heterogenous landscape. If not specifically accounted for a priori, this noisecan weaken comparisons between sites, and can make itdifficult to draw inferences about specific ecologicalprocesses. We developed a terrain-based, paired-sitesampling design to analyze differences in aquaticbiodiversity between streams draining eastern hemlock (Tsuga canadensis) forests, and those draining mixedhardwood forests in Delaware Water Gap National RecreationArea (USA). The goal of this design was to minimize variancedue to terrain influences on stream communities, whilerepresenting the range of hemlock dominated streamenvironments present in the park. We used geographicinformation systems (GIS) and cluster analysis to define andpartition hemlock dominated streams into terrain types basedon topographic variables and stream order. We computedsimilarity of forest stands within terrain types and usedthis information to pair hemlock-dominated streams withhardwood counterparts prior to sampling. We evaluated theeffectiveness of the design through power analysis and foundthat power to detect differences in aquatic invertebratetaxa richness was highest when sites were paired and terraintype was included as a factor in the analysis. Precision ofthe estimated difference in mean richness was nearly doubledusing the terrain-based, paired site design in comparison toother evaluated designs. Use of this method allowed us tosample stream communities representative of park-wide forestconditions while effectively controlling for landscapevariability.     

Analysis of the Threshold and Expected Coverage Approaches to the Probabilistic Reserve Site Selection Problem

Two approaches to formulating the reserve site selection problem when species occurrence data is probabilistic were solved for terrestrial vertebrates in a small set of potential reserve sites in Oregon. The expected coverage approach, which maximizes the sum of the occurrence probabilities, yielded solutions that covered more species on average in Monte Carlo simulations than the threshold approach, which maximizes the number of species for which the occurrence probability exceeds some threshold.     

Heavy Metals and Selenium in Herring Gulls (LARUS ARGENTATUS) NESTING IN COLONIES FROM EASTERN LONG ISLAND TO VIRGINIA

With increasing interest in assessing the health or well-being ofcommunities and ecosystems, birds are being used asbioindicators. Coloniallynesting species breed mainly in coastal areas that are alsopreferred for humandevelopment, exposing the birds to various pollutants. Inthis paper concentrations of heavy metal and selenium in the feathers ofHerring Gulls(Larus argentatus) nesting in several colonies fromMassachusetts toDelaware are reported. There were significant differencesamong colonies forall metals, with metal concentrations being two to nearly fivetimes higher atsome colonies than others. Selenium showed the leastdifference, and cadmium showed the greatest difference among sites. Concentrations of lead werehighest at Pralls Island; mercury was highest at Shinnecock,Huckleberry andHarvey, and manganese was highest at Captree.     

测定废弃泥浆中的Cr(Ⅵ)的高效浸提方法研究

研究了废弃泥浆中的Cr(VI)提取测定方法并与土壤的浸提方法进行比较。结果表明,用0.1mol/L的KH2PO4为提取剂高速搅拌离心,分离提取液,可简单、快速、准确地测定废弃泥浆中的Cr(VI)。该方法的相对标准偏差为0.6%~2.5%,加标回收率86%~98%。     

转炉钢渣配烧水泥熟料及其试生产

转炉钢渣配烧水泥熟料,可降低能耗和成本,提高水泥产量和质量,具有显著的经济效益和环境效益.本文介绍了钢渣配烧水泥熟料的理论依据、生料制备、熟料煅烧和熟料分析检验,以及试生产情况.