氨法烟气脱硫循环液沉降试验研究

通过湿法烟气脱硫副产硫酸铵生产工艺中的循环母液混凝试验,讨论母液的沉降性能,初步探讨母液被循环浓缩的程度对混凝处理效果的影响。     

一种新型复合式生物流化反应器混合特性的研究

对新型蜂窝状断面复合生物流化反应器进行了液体循环速率和水力停留时间分布曲线的测定，实验表明新型反应器具有抗冲击负荷强，接近CSTR反应器的特点，反应器随气量增大、载体投加量减少和进水量减少而更近似于CSTR反应器，通过理论分析，证明了影响液体循环速率的参数主要有气体流量(气含率)、反应器沿程和局部阻力系数以及Ad/Ar，并且得出液体循环速率与反应器高度的0．5次方成正比。     

喷射浮选处理含油污水的研究

重点对喷射浮选处理含油污水进行了试验研究，结果表明浮选室内射流泵的没水深度对喷射选除油效果有较大的影响，并且只有在气泡量大并充满浮选室及表面相对平静的状态下，才儿得较好效果，为此，我们在浮选室内加入自制的增料，使兼并的气海重新得到分散，消耗了一部分动能，减缓了浮选室的扰动，使除在大提高，从而为研制新型高效的喷射浮选设备提供了一条新途径。     

Continuous subcutaneous insulin infusion (CSII) in pregnant diabetic patients

The efficacy of the insulin infusion pump (CSII) in pregnancy was examined in 12 diabetic patients and compared with intermittent insulin therapy (IIT). In patients poorly controlled on IIT constant and rapid equilibrium was achieved with CSII (mean of glucose levels: CSII versus IIT=84 versus 137 mg/dl; S.D. = 36 versus 63 mg/dl; mean amplitude of glycemic excursion (MAGE)=65 versus 112 mg/dl. In patients well controlled on IIT, CSII led to a reduction in the variation of glucose excursions (S.D.= 29 versus 36 mg/dl; MAGE=48 versus 76 mg/dl). CSII generally produced a reduction of 20–37 per cent of daily insulin dose (in three cases there was an increase of dose with the achievement of glycemic control). Furthermore in CSII treated-patients amniotic glucose, insulin and C-peptide concentrations werefound tobeinthenormalrange(22.1±10.1 mg/dl; 5.2±2.7μ/ml; 1.25±0.71 ng/ml, respectively). All infants were horn at or near-term, had no macrosomia or neonatal problems. It is concluded that CSII is a highly efficient way to achieve normal glucose levels in pregnancy, not only in type I, hut also in type II or gestational diabetes.     

锅炉废气流化床污泥干化塔的热力计算与分析

利用锅炉尾部废烟气(120～190℃)干化市政污泥,降低污泥含水率可达到后继合理利用。从三方面对污泥干化进行了分析:1)干燥后污泥含水率与污泥处理量关系;2)入口烟温、流量与污泥处理量关系;3)干燥后烟气相对湿度影响因素分析。结果表明:提高入口烟温、流量,污泥出口含水率都可以提高污泥处理量,高入口烟温、流量下,污泥处理量受含水率的影响更大;污泥出口含水率高时,入口烟温提高使污泥处理量提高增大显著;入口烟气流量愈高,入口烟温提高对污泥处理量的增加愈大。干燥后烟气相对湿度与入口烟温有关,干燥之后的烟气的相对湿度离饱和状态较远,此温度范围内的出口烟气湿度还有较大的余量。     

厌氧-局部循环供氧生物膜技术处理农村污水

通过模拟农村生活污水水质和间歇进水特点,利用“厌氧-局部循环供氧生物膜”技术,研究该工艺对有机物、氮、磷的去除效果.厌氧池和局部循环供氧池有效容积比为1∶1.6,曝气装置位于局部循环供氧池中间底部,环形导流板将局部循环供氧池分隔成中间好氧区和四周缺氧区,斜管沉淀池前置到厌氧池与局部循环供氧池之间,出水端设置循环水池.装置连续稳定运行12个月,平均进水量为140 L/d,生物反应区HRT为1.3d.监测结果表明,出水COD、BOD、NH3-N、TN和TP平均浓度分别在40.31、3.38、2.69、11.98和0.75 mg/L,达到了国家城镇污水处理厂污染物排放指标(GB-18918-2002)中的一级排放标准.研究表明,厌氧-局部循环供氧技术是一种适合农村分散污水处理的新工艺,可有效减轻农业面源污染.     

Citizen science networks in natural history and the collective validation of biodiversity data

Biodiversity data are in increasing demand to inform policy and management. A substantial portion of these data is generated in citizen science networks. To ensure the quality of biodiversity data, standards and criteria for validation have been put in place. We used interviews and document analysis from the United Kingdom and The Netherlands to examine how data validation serves as a point of connection between the diverse people and practices in natural history citizen science networks. We found that rather than a unidirectional imposition of standards, validation was performed collectively. Specifically, it was enacted in ongoing circulations of biodiversity records between recorders and validators as they jointly negotiated the biodiversity that was observed and the validity of the records. These collective validation practices contributed to the citizen science character or natural history networks and tied these networks together. However, when biodiversity records were included in biodiversity‐information initiatives on different policy levels and scales, the circulation of records diminished. These initiatives took on a more extractive mode of data use. Validation ceased to be collective with important consequences for the natural history networks involved and citizen science more generally.     

泵串联水灭火系统在森林防火方面的应用

现阶段为了适应国际及国内防火形势,出现了以水灭火为主要形式的灭火方式,并且在实际灭火中体现出巨大的优势.其中泵串联水灭火就是一种很好的形式.林海集团设计了一套远距离接力水泵串联供水灭火系统,尝试以手抬水泵(消防泵)接力供水的方式,从有水源的地方经过消防泵的增压,通过消防水带输送到火场,为水灭火工作提供条件,以实现水灭火.     

煤矸石在新型动态循环淋溶装置中的淋溶特性

采用新型循环淋溶装置对煤矸石进行连续240h的淋溶实验,研究了煤矸石中重金属在淋溶过程中的溶出规律,通过向淋溶液中添加聚丙烯酰胺（CPAM）考察了固体颗粒物的沉降特性.结果表明： 随着淋溶反应时间延长,煤矸石中碱金属Na元素溶于水,形成碱性溶液,这两种因素导致淋溶反应初期淋溶液pH值升高.As、Zn离子浓度在淋溶时间为1~24h时呈上升趋势,而在24~72h,离子浓度呈下降趋势.淋溶液中Cr、Pb、Ba离子浓度在120h内均呈现上升趋势,而在120~240h,对于Cr离子来说,淋溶液的碱性环境促使Cr离子溶出率增大,但取样次数的增多也对Cr离子的浓度降低起到促进作用;淋溶液稀释和Ba离子的沉淀化合物形成,导致淋溶液中Ba离子浓度降低.120~240h,淋溶液中有机物被微生物的生化作用分解以及取样后外加塌陷区水体对淋溶液中COD和BOD起到稀释作用,使COD和BOD降低.在淋溶反应24h内,淋溶液中TON和NH₃-N出现波浪式变化,淋溶时间大于24h时,TON和NH₃-N总体呈升高趋势.随着淋溶时间延长,淋溶液中的固体颗粒物沉降速度逐渐变慢,延长了沉降时间.煤矸石中一些含氮化合物溶解于水中,使淋溶液中电离出 NH₄⁺离子,形成碱性环境.