高等院校教师有效激励机制的探讨

高等院校管理者必须思考如何更加有效的激励教师工作的积极性。高等院校教师的有效激励机制包括教师工作激励机制、教师成就激励机制和优秀教师的价值激励机制。三者有机结合，才能更好的促进教师的工作积极性、主动性、创造性，实现高等院校教师的自我价值。     

Molecular behavior and interactions with microbes during anaerobic degradation of bio-derived DOM in waste leachate

It is the key to control bio-derived dissolved organic matters (DOM) in order to reduce the effluent concentration of wastewater treatment, especially for waste leachate with high organic contaminants. In the present study, the anaerobic degradation of aerobically stabilized DOM was investigated with DOM substrate isolated through electrodialysis. The degradation of bio-derived DOM was confirmed by reduction of 15% of total organic carbon in 100 days. We characterized the molecular behavior of bio-derived DOM by coupling molecular and biological information analysis. Venn based Sankey diagram of mass features showed the transformation of bio-derived DOM mass features. Occurrence frequency analysis divided mass features into six categories so as to distinguish the fates of intermediate metabolites and persistent compounds. Reactivity continuum model and machine learning technologies realized the semi-quantitative determination on the kinetics of DOM mass features in the form of pseudo-first order, and confirmed the reduction of inert mass features. Furthermore, network analysis statistically establish relationship between DOM mass features and microbes to identify the active microbes that are able to utilize bio-derived DOM. This work confirmed the biological technology is still effective in controlling recalcitrant bio-derived DOM during wastewater treatment.     

变速器壳体低周疲劳优化设计

目的 分析变速器壳体驻车耐久试验的失效根本原因,对变速器壳体进行低周疲劳优化设计.方法 首先排查壳体的化学成分、铸造质量,排除材料和工艺引起失效问题的可能性,然后通过有限元方法分析驻车轴孔的最大拉应变、驻车工况壳体变形、轴孔接触区域.根据局部应变分布特征,提出驻车轴修形的优化方案,并且根据壳体材料的低周疲劳参数,确定Coffin-Manson模型,并根据该模型预测壳体驻车轴孔优化前后的疲劳寿命.结果 驻车轴孔的最大拉应变高达0.95％,确定应变过大是导致壳体失效的根本原因.驻车轴度修形的优化方案将最大拉应变降低到0.40％,塑性应变占比由42％降低到5％,疲劳寿命的预测值由原来的175次提高到7980次,满足试验循环次数1000次的要求,最终优化物理样机通过了驻车耐久试验验证.结论 使用的Coffin-Manson模型参数能准确地预测变速器壳体的低周疲劳寿命,驻车轴小角度修形优化方案能够有效解决局部应变过大的失效问题,具有一定的工程参考意义.     

酸性高氟废水处理试验研究

对某化工厂高氟酸性废水经过试验后，采用二级石灰－氯化钙沉淀絮凝法处理，出水的氟浓度达到了国家规定的一级排放标准，且系统运行稳定，工艺简便，易于施工和运行管理。     

生物传感器快速测定BOD在海洋监测中的应用

选用一株耐高渗透压的酵母菌种作为敏感材料可以实现BOD的快速测定。采用海藻酸钙包埋法和聚乙烯醇包埋法两种细胞固定化方法并进行了比较。就聚乙烯醇固定化微生物进行了渗稼压和重金属离子影响的研究。     

重庆近11年大气混合层厚度研究

根据新闻颁国家标准ＧＢ／Ｔ１３２０１－９１的规定，计算了重庆地区近１１年大气混合厚度，分析结果表明，重庆地区大气混合层厚度有明显日变化和季节变化，大气稳定度是混合层厚度的主要决定因子。     

中国PM_(2.5)污染状况和污染特征的研究

近１０ 余年来在中国的城市地区和清洁地区进行了ＰＭ２－５ 的采集和分析，其中包括ＰＭ２－５ 的质量浓度、离子和元素成分、酸度和酸化缓冲能力以及来源解析，研究结果表明，中国大部分地区ＰＭ２－５ 的污染较重，不论是质量浓度，还是各种主要成分浓度，在ＴＳＰ 和ＰＭ１０ 中都占有很高的比重，而ＰＭ２－５ 的酸度也远远高于ＴＳＰ 和ＰＭ１０ ，特别是近年来ＰＭ２－５ 污染还有相对加剧的趋势。     

Atmospheric particulate pollution of Lanzhou using magnetic measurements

１　ＩｎｔｒｏｄｕｃｔｉｏｎＡｔｍｏｓｐｈｅｒｉｃｐａｒｔｉｃｕｌａｔｅｉｓｏｎｅｏｆｔｈｅｍａｉｎａｔｍｏｓｐｈｅｒｉｃｐｏｌｌｕｔａｎｔｓｉｎＣｈｉｎａ．Ｉｔｍａｙｂｅｈａｒｍｆｕｌｉｔｓｅｌｆａｎｄｃａｎａｃｔａｓａｃａｒｒｉｅｒｏｆｔｏｘｉｃｍａｔｔｅｒｓｗｈｉｃｈｍａｙｈａｖｅｒｅｍａｒｋａｂｌｅｉｍｐａｃｔｓｏｎｈｕｍａｎｈｅａｌｔｈａｎｄａｔｍｏｓｐｈｅｒｉｃｅｎｖｉｒｏｎｍｅｎｔｑｕａｌｉｔｙ．Ｃｏｍｂｕｓｔｉｏｎｏｆｃｏａｌ，ｗｈｉｃｈｓｔｉｌｌｓｅｒｖｅｓａｓｐｒｉｍａｒｙｅ…     

30万吨合成氨厂环境噪声综合评价

镇海炼化股份有限公司化肥厂针对装置区噪声污染严重这一现状，积极开展噪声源防治工作经过几年来的噪声综合治理，提高了化肥厂噪声合格率，改善了厂区环境。     

Method of pollution sources assessment in relation to residential site selection

Much investigation supports a high incidence of disease and death rates when people live in ambient polluted air for a long time. Thus, the location of residential sites is important from a public health viewpoint. The method outlined in this paper is useful for determining the location of residential sites based on pollution sources assessment.