基体表面状态对硅烷环氧杂化树脂涂层/2024铝合金间附着力影响

目的研究不同表面状态对硅烷环氧杂化树脂涂层/2024铝合金间附着力影响规律。方法结合硅烷环氧杂化树脂涂层的综合性能与实际应用情况,选取4种常见的预处理方式来改变基体表面状态,采用拉拔测试仪测试不同基体表面状态(基体表面p H值、基体表面粗糙度、基体表面能),涂层/基体间的附着力值,研究基体表面状态对该涂层/基体间附着力的影响关系。结果基体表面状体影响涂层附着力的根本原因是基体表面能、基体表面p H值和基体表面粗糙度。结论对于硅烷环氧杂化树脂涂层,其表面处理方式可用热碱清洗方法代替传统铬酸盐钝化;当硅烷环氧杂化树脂涂层喷涂厚度为30μm时,将铝合金基体表面粗糙度控制在Ra=4.75μm左右,可保证涂层有好的附着性,附着力值为8.84 MPa。     

铀胁迫对5种牧草种子萌发的影响

为进一步探究放射性重金属铀污染环境对植物种子萌芽及生长所产生的迫害,根据我国铀矿冶废水中铀的质量浓度(5 mg/L)选择不同质量浓度(0、1 mg/L、5 mg/L、10 mg/L、15 mg/L、20 mg/L)的铀溶液进行试验,用以胁迫5种1年生牧草(三叶草、苜蓿草、黑麦草、高丹草和苏丹草)种子,同时观察记录各自的萌发状况(发芽数和第7 d幼苗生长长度),计算其发芽率、发芽势、发芽指数(GI)、活力指数(VI)及耐性指数,并与对照组进行量化指标比较。最后比较各牧草种子所受到的危害并做出评价。结果表明:对于不同程度的铀污染,多数植物表现为低质量浓度促进其种子萌发,高质量浓度则严重抑制甚至致死。对于三叶草、苜蓿草和黑麦草种子,低质量浓度(1 mg/L)铀溶液促进种子的萌发,质量浓度升高则为抑制,其中黑麦草表现稍异常,质量浓度为5 mg/L时对种子萌发有促进作用,使最终发芽率较对照提升14%;对于高丹草,低质量浓度(5 mg/L)时促进种子萌发,而在质量浓度稍低于或超过5 mg/L时表现出明显的抑制现象,各指标低于对照13%左右;苏丹草则仅呈现抑制现象,铀质量浓度为5mg/L时抑制现象稍轻,最终发芽率较对照组仅降4%,小于或大于5mg/L时均受抑制,且质量浓度越高抑制现象越明显,最终发芽率最高仅28%。     

Estimating Effects of Tidal Power Projects and Climate Change on Threatened and Endangered Marine Species and Their Food Web

Marine hydrokinetic power projects will operate as marine environments change in response to increased atmospheric carbon dioxide concentrations. We considered how tidal power development and stressors resulting from climate change may affect Puget Sound species listed under the U.S. Endangered Species Act (ESA) and their food web. We used risk tables to assess the singular and combined effects of tidal power development and climate change. Tidal power development and climate change posed risks to ESA‐listed species, and risk increased with incorporation of the effects of these stressors on predators and prey of ESA‐listed species. In contrast, results of a model of strikes on ESA‐listed species from turbine blades suggested that few ESA‐listed species are likely to be killed by a commercial‐scale tidal turbine array. We applied scenarios to a food web model of Puget Sound to explore the effects of tidal power and climate change on ESA‐listed species using more quantitative analytical techniques. To simulate development of tidal power, we applied results of the blade strike model. To simulate environmental changes over the next 50 years, we applied scenarios of change in primary production, plankton community structure, dissolved oxygen, ocean acidification, and freshwater flooding events. No effects of tidal power development on ESA‐listed species were detected from the food web model output, but the effects of climate change on them and other members of the food web were large. Our analyses exemplify how natural resource managers might assess environmental effects of marine technologies in ways that explicitly incorporate climate change and consider multiple ESA‐listed species in the context of their ecological community. Estimación de los Efectos de Proyectos de Energía de las Mareas y el Cambio Climático sobre Especies Marinas Amenazadas y en Peligro y su Red Alimentaria     

The free energy and information embodied in the amino acid chains of organisms

It is generally accepted as a useful and workable hypothesis that when an ecosystem receives an inflow of exergy (energy that can do work) it will utilize this flow of exergy to move as far away from thermodynamic equilibrium as possible after the exergy (energy) for maintenance has been covered. If more combinations of system components including organisms are offered, the combination of components and processes that will bring the system most away from thermodynamic equilibrium will win.The amino acid sequences of the proteins e.g. enzymes determine and control the life processes of the organisms and may be viewed as information sensu lato. The free energy of oxidation of the amino acids and the peptide bonds of the cell enzymes expresses therefore the exergy content, eco-exergy or work capacity that the information contributes to “moving further away from thermodynamic equilibrium”. In this paper eco-exergy is calculated and plotted versus the β-values (a measure of the information contained in the genome) for different organisms. The eco-exergy density was previously (see [J?rgensen et al., 1995] and [J?rgensen et al., 2005]) proposed to be calculated as the summation of the product of the β-values representing the information of the genome multiplied by the concentrations of the respective ecosystem components. This analysis shows a strong correlation between the β-values and free energy released when oxidizing the enzymes. The β-values can therefore be assumed to represent the free energy that the organisms have invested in genetic information.     

Carrousel氧化沟的三维流场模拟与分析

利用CFD的Fluent软件，采用标准的三维K—ε紊流模型，对桂林市七里店污水处理厂1#氧化沟的流场进行了数值模拟，对导流墙和推进器附近的流速进行了计算分析。结果表明，氧化沟下层流速较低，局部区域流速低于0．2m／s。为了防止污泥沉降，应进一步降低推进器位置。能量损失分析表明，卡罗塞氧化沟能量损失主要来源于沿程摩擦损失和局部损失。可通过增加墙体光滑度、降低入口高度以及增加导流墙的曲率半径等措施减少能量损失，改善现有氧化沟的水力特征。     

The impact of energy awareness on energy efficiency

The increasing levels of global warming, depleting sources of fossil fuels and increasing energy costs are all having a large detrimental effect on today's society. Many efforts are being made to try and increase energy efficiency all over the world. One of the major problems is unnecessary and excessive energy utilisation. This problem has been identified by Loughborough University and they are making efforts to try and reduce energy wastage. One of their strategies, used up until recently, involved increasing energy awareness within students in halls of residence by means of a reward system called the Residential Halls Energy Efficiency League (Imago Services, Loughborough Students Union, Estates Services 2006). This scheme managed to reduce energy consumption by up to 10%, saving an estimated £9000 in only 52 days. Can those results be improved by targeting students more specifically? How much energy can be saved by increasing energy awareness?     

PHB/V in Extrusion Coating of Paper and Paperboard: Part I: Study of Functional Properties

Extrusion-coating experiments were carried out in the pilot line at Tampere Univesity of Technology (Institute of Paper Converting). Typical paper and paperboard substrates were coated with commercially produced 3-hydroxybutyrate/3-hydroxyvalerate. The resulting physical properties of extrusion-coated composite structures were studied. Adhesion between PHB/V and a fiber-based substrate was rather poor, regardless of typically used pretreatments (corona and flame). On the other hand, adhesion was sufficient (mode of failure was fiber tear as the materials were separated) when the substrate was primed with an acrylic-based primer. The surface energy and polarity of PHB/V were much higher than the respective ones of LDPE. Curling of PHB/V was reduced by the addition of wax or tall oil rosin into the base polymer.     

Determination of biogas generation potential as a renewable energy source from supermarket wastes

Fruit, vegetable, flower waste (FVFW), dairy products waste (DPW), meat waste (MW) and sugar waste (SW) obtained from a supermarket chain were anaerobically digested, in order to recover methane as a source of renewable energy. Batch mesophilic anaerobic reactors were run at total solids (TS) ratios of 5%, 8% and 10%. The highest methane yield of 0.44 L CH₄/g VS_added was obtained from anaerobic digestion of wastes (FVFW + DPW + MW + SW) at 10% TS, with 66.4% of methane (CH₄) composition in biogas. Anaerobic digestion of mixed wastes at 5% and 8% TS provided slightly lower methane yields of 0.41 and 0.40 L CH₄/g VS_added, respectively. When the wastes were digested alone without co-substrate addition, the highest methane yield of 0.40 L CH₄/g VS_added was obtained from FVFW at 5% TS. Generally, although the volatile solids (VS) conversion percentages seemed low during the experiments, higher methane yields could be obtained from anaerobic digestion of supermarket wastes. A suitable carbon/nitrogen (C/N) ratio, proper adjustment of the buffering capacity and the addition of essential trace nutrients (such as Ni) could improve VS conversion and biogas production yields significantly.     

Fuelwood assessment at micro-watershed level in Northeast Himalaya:a case study in Manipur,India

Fuelwood is one of the major sources of energy in the domestic sector across the rural areas,especially in the developing regions across the world.The Northeastern Himalayan state of Manipur is dominated by the tribal population that largely depends on fuelwood from the nearby forest area.The entire dependence on forests for energy resources is affecting the sustainability of the forest ecosystem in the region,thus indicating the livelihood conditions.Since land-use land-cover change is the key driver to the change in resource availability of a region,the present study has tried to analyze the landcover changes over a period 28 years.The second major component affecting resource availability is the increasing population pressure that leads to changes in the land dynamics,which directly affect the resource production.Based on the existing consumption pattern,the total consumption of fuelwood in the watershed ranges fiom a minimum of 289.992 tons/year to a maximum of 3545.719 tons/year with an average of 1561.956 tons/year in the year 2009 and simulated fuelwood consumption for the year 2021 is around 1469.260 tons/year.Nine different probable scenarios of resource are proposed to calculate the stress value that can be used by the policy-makers and planners for suitable policy implementation at the micro level with a complex social system.