某硫酸生产线清洁生产审核案例研究

某公司硫酸生产线针对生产过程中存在的原材料消耗高、产品转化率低等问题,通过开展清洁生产审核,分析生产过程能耗、物耗、废物产生量的现状,从原辅材料和能源、工艺、设备、过程控制、管理、员工、产品及废物八个方面提出14个清洁生产方案,通过方案的实施,提高了公司清洁生产水平,实现了预防污染、节能降耗减污增效的目的。     

Gas separation using porous cement membrane

Gas separation is a key issue in various industrial fields. Hydrogen has the potential for application in clean fuel technologies. Therefore, the separation and purification of hydrogen is an important research subject. CO2 capture and storage have important roles in ＂green chemistry＂. As an effective clean technology, gas separation using inorganic membranes has attracted much attention in the last several decades. Membrane processes have many applications in the field of gas separation. Cement is one type of inorganic material, with the advantages of a lower cost and a longer lifespan. An experimental setup has been created and improved to measure twenty different cement membranes. The purpose of this work was to investigate the influence of gas molecule properties on the material transport and to explore the influence of operating conditions and membrane composition on separation efficiency. The influences of the above parameters are determined, the best conditions and membrane type are found, it is shown that cementitious material has the ability to separate gas mixtures, and the gas transport mechanism is studied.     

ABR-MBR一体化工艺节能降耗措施优化研究

能耗高和膜污染是限制膜生物反应器(MBR)广泛应用的重要因素.为降低工艺运行能耗和延缓膜污染,以厌氧折流板反应器(ABR)-MBR工艺处理生活污水为例,对工艺结构和脱氮除磷运行条件进行优化.结果表明,通过优化ABR-MBR工艺结构,可降低43%的运行能耗,同时可保持较高的COD、NH+4-N、TN和TP去除效果,平均去除率分别为91%、85%、76%和86%.另外,添加颗粒填料可有效延缓膜污染,不过也改变了膜污染的形成过程,膜内部污染物含量显著增多,碳水化合物含量增加,而蛋白质含量减少,碳水化合物/蛋白质比明显增大.最终,增强了MBR反应器的实际应用性能.     

浅议建立清洁生产审核内审员制度

阐述了建立内审员制度的必要性与意义.探讨了内审员的工作职能和管理与培训方法,为建立内审员制度提供了参考模式.     

Sorption of organic compounds to activated carbons. Evaluation of isotherm models

Sorption to ‘hard carbon’ (black carbon, coal, kerogen) in soils and sediments is of major importance for risk assessment of organic pollutants. We argue that activated carbon (AC) may be considered a model sorbent for hard carbon. Here, we evaluate six sorption models on a literature dataset for sorption of 12 compounds onto 12 ACs and one charcoal, at different temperatures (79 isotherms in total). A statistical analysis, accounting for differences in the number of fitting parameters, demonstrates that the dual Langmuir equation is in general superior and/or preferable to the single and triple Langmuir equation, the Freundlich equation, a Polanyi–Dubinin–Manes equation, and the Toth equation. Consequently, the analysis suggests the presence of two types of adsorption sites: a high-energy (HE) type of site and a low-energy (LE) type of site. Maximum adsorption capacities for the HE domain decreased with temperature while those for the LE domain increased. Average Gibbs free energies for adsorption from the hypothetical pure liquid state at 298 K were fairly constant at −15 ± 4 and −5 ± 4 kJ mol⁻¹ for the HE and LE domain, respectively.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

Après Paris: Breakthrough innovation as the primary moral obligation of rich countries

While the notion of differentiated responsibility has always included an element of technological transfer, the growing disparity between the deployment of non-scalable renewable energy sources in the rich countries and the massive expansion of fossil infrastructure elsewhere has brought new urgency to issues of climate leadership. Breakthrough innovation into technologies capable of providing an abundance of clean energy now appears necessary not only to broaden energy access but also to ensure that fossil fuels are quickly displaced globally (including in those countries that have failed to take climate change seriously). Moreover, it is reasonable to expect that a climatechanged world in itself will demand abundant energy to facilitate everything from carbon dioxide removal to mass desalination for agriculture and other adaptation measures. Considering the moral and political impossibility of treating sustained poverty as the “solution” to the climate crisis, this paper suggests that rich countries have a moral obligation to invest in breakthrough innovation into technologies that are compatible with a future global economic convergence around OECD-levels.     

基于循环经济理念的煤炭型老工业基地振兴的研究与分析——华丰煤矿为例

华丰煤矿就其地理位置，资源条件和社会环境而言，发展循环经济有着独特优势。按照发展循环经济的要求，充分合理的开发利用资源是当前落实科学发展观所迫切需要解决的问题，发展循环经济需要市场机制与煤矿系统的双重作用，尤其离不开煤矿系统的推进。     

Saving Energy and Reducing Emission When Recycling Acetone during the Production of Soy Phospholipid

Acetone, which is volatile, flammable, toxic, expensive and causing serious air pollution, is often used as extracting solvent in the production of powdery soy phospholipid. Recycling and reusing acetone is the key of reducing the cost of production. Therefore, saving energy and reducing emission when recycling acetone are the most important technologies during the production of phospholipid. On the basis of the productivity of powdery phospholipid being 2.4 t every day, 43.2 t acetone is reused every 8 h and the total volume of acetone gas emitted is 450.75 m^3 （about 901.5 kg）. According to the current price of acetone, the lost money is about 7212 yuan RMB.     

高校清洁生产审核及清洁生产措施研究

文章以西部某高校为调查对象,采用资料收集法和实地调查法,对该校进行清洁生产审核,得出该校清洁生产现状及存在问题,并提出相应的清洁生产措施.结果表明:(1)该校水、电等能、资源用量无精确计量,实行不限量供给,是造成浪费的原因之一.(2)通过清洁生产措施,可明显降低和减少该校能、资源用量及一次性污染排放量.因此,对高校实施清洁生产,对于减轻学校的财政压力、建立环境友好型社会具有重要的意义.