Recycling and Reusing Heat Energy During the Production of Powdery Phospholipid

The temperature is 56.5°C when acetone gas is rectified during the production of powdery phospholipid. If heat exchanger is added, heat energy that is reclaimed can be used by other heaters. On the basis of exchange hot water (51°C) 4m³ every minute, a factory with the productivity of powdery phospholipid being 10 ton a day can save 533.2 ton standard coal which is equivalent to 746.48 ton common coal. If this technique of saving energy and reducing emission could be widely used in correlative industries of all over the country, economic benefits will be prominent.     

Policy options to promote Chinese new energy vehicles consumption

Inspired by the green revolution, new energy vehicles (NEVs) provide a fresh, alternative mode of transportation for Chinese consumers that reduce their reliance on traditional, gasoline/diesel-based cars. However, despite strong government support for NEVs in China, the level of uptake by consumers remains slow. Using Shanghai as a case study, this article provides a much-needed insight into local consumers’ motivations to invest in NEVs through a survey of 100 Shanghai residents. Results indicate that current NEV promotion policies do not have a significant impact on the cognitive trade-off of NEV consumption under the “Integrated Consumer Behavior Model,” mainly due to inconvenient charging facilities, technical concerns regarding battery, higher prices, and wait-and-see attitudes regarding the pilot policy environment. Drawing on experiences from Sweden and New Zealand, this research serves to enhance knowledge on consumer attitudes towards NEVs and assist policy makers in developing more effective green consumption promotion campaigns in the future.     

Gatekeeping and Communities in Energy Transition: A Study of the Block Island Wind Farm

ABSTRACT

The Block Island Wind Farm (BIWF) is the first offshore wind farm in the United States. Using gatekeeping theory as a framework, this research analyzes local and regional/national newspaper coverage of the BIWF paying particular attention to the use of sources. The data suggest that the differences between newspaper source usage from 1 January 2008 to 1 July 2017 is minimal. However, business sources appeared more than any other group, including government sources, which is a new finding. The prevalence of business sources leads to important questions about the role of businesses in shaping narratives about community transitions to renewable energy systems.     

Spreading the News on Carbon Capture and Storage: A State-Level Comparison of US Media

Carbon capture and storage (CCS) has received abundant federal support in the USA as an energy technology to mitigate climate change, yet its position within the energy system remains uncertain. Because media play a significant role in shaping public conversations about science and technology, we analyzed media portrayal of CCS in newspapers from four strategically selected states. We grounded the analysis in Luhmann's theory of social functions, operationalized through the socio-political evaluation of energy deployment (SPEED) framework. Coverage emphasized economic, political/legal, and technical functions and focused on benefits, rather than risks of adoption. Although news coverage connected CCS with climate change, the connection was constrained by political/legal functions. Media responses to this constraint indicate how communication across multiple social functions may influence deployment of energy technologies.     

Thermal rehabilitation of Romanian housing: a low cost assessment tool

The numerous buildings that currently require thermal rehabilitation in Romania means that substantial resources and a large number of competent people are required to carry out surveys and energy audits. However, commercial energy balance software is mostly unaffordable for those organisations involved in this process. This paper describes an energy balance programme – ENEFControl – developed to be a rapid, low cost, local tool able to assist in the choice of energy efficient solutions for buildings. To test the software, thermal and energy analyses were carried out on a 1970s built apartment block in Transylvania. Based on these analyses, three constructive scenarios were proposed for thermal rehabilitation. Compared to the performance of the analysed building, the thermal and energy performance of the retrofitted building in all three scenarios significantly improved. Since European Union accession in 2007, rapidly rising energy costs have affected the Romanian population. ENEFControl offers Romanian engineers and architects an opportunity to speed up the rehabilitation programme of buildings without the need for more expensive expertise and tools.     

Comparative experimental analysis of the effect of convective heat losses on the performance of parabolic dish water heater

This paper reveals comparative experimental analysis of the effect of variation of natural and forced convection heat losses on the performance of prototype parabolic dish water heater with coated and non-coated receivers. With the above-described system, hot water needs in domestic applications can be fulfilled instantly. A parabolic dish collector was used for instant water heating. Design of solar parabolic dish collector consists of truncated cone-shaped helical coiled receiver made up of copper at focal point. Instantaneous efficiency of 63% and 48% has been achieved with coated and non-coated receivers. This prototype has been evaluated for its performance with water flow rate of 0.0076 kg/s during the months of April and May 2010 at Shivaji University, Kolhapur, Maharashtra, India (latitude: 16.42° North, longitude: 74.13° West).     

The role of integrated performance model in sustainable envelope design and assessment

The issue of sustainable design and assessment of the residential building envelope is a complex process that requires considering many factors including life cycle performance. As such, in an effort to develop an integrated approach that combines relevant sustainable development factors and life cycle concepts for sustainable designs, an integrated performance model (IPM) was developed. The IPM is an essential tool to aid the sustainable design of the residential building envelope, reduce the carbon emission and the whole residential building energy consumption, thereby ensuring sustainable performance of the building envelope and building sustainability. The IPM application indicates that sustainable performance of the building envelope in extreme weather and climatic condition is significantly influenced by the energy efficiency performance of the development.     

Energy analysis of algae-to-biofuel production chains integrated with a combined heat and power plant

ABSTRACT

This study examines the energy and mass balances of algae cultivation and different post-processing pathways. Flue gases and excess heat from a combined heat and power (CHP) plant are used in algae cultivation, with nutrients from municipal wastewater. In the studied pathways, algae are cultivated in open ponds and photobioreactors with or without artificial lighting. Algal mass is used for methane, biodiesel or ethanol production, or it is combusted in a boiler. Results show that in most process pathways energy output exceeds the energy consumption in processing, and the energy returns are approximately twice as large as the electricity input. A large fraction of input energy is low-temperature heat, while the products have a higher value. Energy outputs from different pathways are similar, but heat and electricity consumption in processing vary significantly. Supercritical water gasification pathway is identified as a possible future option, whereas lipid extraction pathways are suggested to be the most likely candidates for industrial scale operations.     

The considerations and limitations of feedback as a strategy for behaviour change

Design for Sustainable Behaviour (DfSB) is a maturing research area concerned with the application of design strategies to influence consumer behaviour during a products use phase towards more sustainable action. However, current DfSB research has focussed on strategy selection with little research into understanding the real-world impact of the behaviour changing interventions debated. This article presents the results of an extensive literature review of one specific DfSB strategy, feedback – a user agentive performance indicator. These findings exemplify the considerations and limitations of this particular approach to behaviour change, drawing on empirical research conducted by a breadth of authors, including two of the only medium-term case studies in the field of DfSB. Considerations discussed include the frequency, duration and accuracy of feedback; the selection of metrics and the presentation medium and mode; the use of ambience and the location of the installation. Limitations of feedback include the need for additional information and comparisons; the issue with multiple users; technical issues; relegation to background technology and the potential rebound effects. This article provides insights to both improve the effectiveness of future feedback design efforts and also to help facilitate discussion on feedbacks position as a strategy within DfSB.     

Thermally chargeable supercapacitor based on nickel-coated nanoporous carbon

Nanoporous carbon is coated by pure nickel via an electroless plating method. The nanoporous carbon provides a high-surface-area substrate, leading to a large capacitance; the nickel surface layer is of a high work function, resulting in a thermally sensitive electrode potential. Such a system is ideal for thermally chargeable supercapacitor (TCS) system, which converts low-grade heat (LGH) to electrical energy. The specific energy per thermal cycle per gram of electrode mass is ~1.8 mJ, with a temperature difference of 50°C.