硫酸介质中高锰酸钾氧化降解非离子表面活性剂Tween-80动力学研究

应用光谱法研究了硫酸介质中,高锰酸钾氧化降解非离子表面活性剂Tween-80(聚氧乙烯山梨糖醇酐单油酸酯)的动力学性质,探讨了高锰酸钾和硫酸浓度,以及反应温度对氧化降解过程的影响,结果表明,氧化降解反应的速率常数(k)随着硫酸浓度的增大而增大,但却随着高锰酸钾浓度的增大而减小;温度对反应速率常数的影响,较好地遵循阿累尼乌斯公式.通过对反应混合物浊点变化的分析,说明了非离子表面活性剂Tween-80分子中存在活性较高的氧乙烯结构单元,是其被高锰酸钾氧化降解的根本原因.     

基于云模型的城轨信号系统安全保障能力评价方法*

为准确评价城轨信号系统安全保障能力及影响因素,基于云理论对定性与定量因素的良好融合优点,构建城轨信号系统安全保障能力评价云模型及评价指标体系,采用组合赋权法对各指标赋予权重,并基于专家意见,利用正向云发生器生成标准云。结果表明:该云模型具有一定稳定性和可靠性,可对城轨信号系统安全保障能力进行有效测评,同时能够发现安全运营中的缺陷,有助于协助管理方进行针对性改善,以提高城轨信号系统的安全保障能力。     

滤床熟化周期及其主要影响因素的研究

阐述滤床熟化的概念及其形成机理,对影响熟化床层的因素进行了试验研究,结果表明进水浊度、混凝效果及洗砂量是影响熟化床层的主要因素。由于集成型给水处理设备的表面滤层一直处于熟化状态,而滤层水流方向的深处滤料始终处于清洁状态,砂滤器内始终保持一种动态的平衡关系,滤床运行在熟化后的有效过滤期,因而能够保证较高的出水水质。     

Damage to DNA of effective microorganisms by heavy metals: Impact on wastewater treatment

The research is to test the damage to DNA of effective microorganisms(EMs)by heavy metal ions As3+,Cd2+,Cr3+,Cu2+,Hg2+, Pb2+,and Zn2+,as well as the effects of EM bacteria on wastewater treatment capability when their DNA is damaged.The approach applied in this study is to test with COMET assay the damage of EM DNA in wastewater with different concentrations of heavy metal ions As3+,Cd2+,Cr3+,Cu2+,Hg2+,Pb2+,Zn2+,as well as the effects of EM treated with As3+,Cd2+,Cr3+,Cu2+,Hg2+,Pb2+,and Zn2+ on COD degradin...     

关于危险化学品重大危险源分级的研究

在重大危险源死亡半径分级法的基础上,引入经济密度和人员密度,并给出不同情况下相应的计算方法。然后以＂最大危险原则＂和＂概率求和原则＂为财产损失和人员伤亡计算的原则,以《重大危险源分级标准（征求意见稿）》中的分级标准为标准,对危险化学品重大危险源进行分级,这样进行危险源分级时,可将周边环境中可能波及到的财产损失和人员伤亡考虑进去,使得危险化学品重大危险源分级考虑的因素更加全面,分级的结果和实际情况更加吻合。本文的研究结果对危险化学品重大危险源分级具有一定的参考价值。     

关于GB18218-2009标准中易燃气体临界量分析

分析了我国重大危险源辨识标准的修订工作及评价方法的研究状况。新标准明确监管对象为危险化学品,并通过设立危险化学品类别及其临界量的方式拓展了监管范围。我国采用的重大危险源评价方法着重关注危险物质的种类和数量,以物质的固有危险性作为评判依据,更符合我国危险化学品现状。利用蒸气云爆炸及沸腾液体扩展蒸气爆炸两类事故模型对GB18218-2009中临界量的易燃气体可能的致害范围进行模拟分析。研究认为,危险化学品重大危险源的辨识是在物质固有危险性的基础上,综合考虑了事故发生频率、次要危险性、化学反应活性及对环境影响等诸多因素。     

Predicting modes of spatial change from state-and-transition models

State-and-transition models (STMs) can represent many different types of landscape change, from simple gradient-driven transitions to complex, (pseudo-) random patterns. While previous applications of STMs have focused on individual states and transitions, this study addresses broader-scale modes of spatial change based on the entire network of states and transitions. STMs are treated as mathematical graphs, and several metrics from algebraic graph theory are applied—spectral radius, algebraic connectivity, and the S-metric. These indicate, respectively, the amplification of environmental change by state transitions, the relative rate of propagation of state changes through the landscape, and the degree of system structural constraints on the spatial propagation of state transitions. The analysis is illustrated by application to the Gualalupe/San Antonio River delta, Texas, with soil types as representations of system states. Concepts of change in deltaic environments are typically based on successional patterns in response to forcings such as sea level change or river inflows. However, results indicate more complex modes of change associated with amplification of changes in system states, relatively rapid spatial propagation of state transitions, and some structural constraints within the system. The implications are that complex, spatially variable state transitions are likely, constrained by local (within-delta) environmental gradients and initial conditions. As in most applications, the STM used in this study is a representation of observed state transitions. While the usual predictive application of STMs is identification of local state changes associated with, e.g., management strategies, the methods presented here show how STMs can be used at a broader scale to identify landscape scale modes of spatial change.     

基于数据场和云模型的洪水灾害风险等级评估

根据灾害风险系统的定义以及洪水灾害的特点,用灾情损失与地形危险性的综合作用描述洪水灾害风险。针对研究单元风险的内在联系和等级概念的模糊性、随机性,提出基于数据场和云模型的洪水灾害风险等级评估方法,以期为洪水灾害风险管理提供科学依据。以苏州市和上海市(崇明县除外)为例,首先用数据场对灾情数据进行扩散;再用云模型对地形进行等级划分;最后对两者进行耦合得到该地区的洪水灾害风险等级划分。结果表明:苏州市中心偏北区域和上海市中心区域综合风险等级最高,并向四周呈递减趋势;总体上中部风险等级最高,北部次之,南部最低。     

危险化学品泄漏事故点火概率取值研究

为计算危险化学品泄漏后发生火灾、爆炸等事故的概率,提高风险评估的量化水平,对点火概率的取值进行研究。从模型计算和直接取参考值2个方面探讨点火概率的取值问题,提出不同情形下的取值建议,并结合案例应用对点火概率2种取值方法进行对比分析研究。研究结果表明:点火概率模型计算不确定性较大且适用性有限,而直接取值的参考值均由一系列事件统计而得出,具有一定的科学性,实际取值更倾向于根据经验数据或已有的数据进行取值,但取值时需要充分考虑实际情况(如安全条件等)进行适当的修正,以便取值更科学。     

Numerical simulation of propane detonation in medium and large scale geometries

A modelling strategy has been developed for consequence analysis of medium and large scale gaseous detonation. The model is based on the solution of Euler equations with one-step chemistry. The Van Leer flux limited method which is a total variation diminishing scheme is used for shock capturing. Preliminary calculations were firstly conducted for small domains with fine grids which resolve the wave, relatively coarse grids which have less than 10 grids across the wave and coarse grids in which the minimum grid size is larger than the wave thickness to ensure that the reaction scheme has been properly tuned to capture the correct detonation pressure, temperature and velocity in the resolutions used in the different cases. The model was firstly tested against a medium scale detonation test in a shock tube with U-bends. Reasonably good agreement is achieved on detonation pressure and mean shock wave velocities at different measuring segments of the tube. Following the validation, the detonation of a hypothetical planar propane-air cloud is simulated. The predictions uncovered some interesting features of such large scale detonation phenomena which are of significance in the safety context, especially for accidental investigations. The findings from the present analysis are in line with the forensic evidence on damages in some historic accidents and challenges previous analysis of a major accident in which forensic evidence suggested localised detonation but was considered as the consequence of fire storms by the investigation team.