CPC/CaO_2氧缓释复合材料的制备及其释氧性能探讨

利用过氧化钙(CaO2)遇水释放氧气的特性,采用混合法将CaO2载入到磷酸钙骨水泥(CPC)中,并通过挤出-滚圆造粒方法制备出CPC/CaO2氧缓释复合材料,旨在为污染地下水的好氧生物修复技术提供一种长期、高效的供氧源。由X射线衍射(XRD)分析可知,通过固相反应制取的CPC主要成分为Ca5(PO4)3(OH)和Ca10(PO4)6(OH)2,具有较快的固化时间和固化效果;CPC/CaO2氧缓释复合材料分3个阶段进行释氧,其中2、3阶段分别符合一级和零级释氧动力学特征,且其释氧速率和释氧周期得到明显改善。本研究成果可用于实际地下水修复工程,解决污染地下水原位生物修复过程中溶解氧(DO)的输送问题。     

中小型工业窑炉NO_x废气的净化技术与应用

介绍了中小型工业窑炉生产过程中排放NOx的现状,并针对NOx的治理问题,从工程应用角度,简述了湿法和干法净化NOx的原理和化学反应过程。讨论了NOx排放特性和NOx废气中NO2/NOx比例的问题。提出了影响NOx治理的主要因素,包括吸收剂、吸附剂、催化剂和设备的部分应用参数,并结合工程实例指出工程需要注意的问题。介绍了多项采用湿法和干法净化NOx的工程应用项目,丰富了中小工业窑炉NOx废气的治理的实践经验,为中小工业窑炉排放NOx治理奠定了基础。     

Uptake of uranium and thorium by native and cultivated plants

Large part of available literature on biogeochemistry of uranium and thorium refers to the studies performed either in highly contaminated areas or in nutrient solutions that have been artificially ‘spiked’ with radionuclides. Effects of background levels of natural radioactivity on soil-grown plants have not been studied to the same extent. In this paper, we summarised results of greenhouse and field experiments performed by the author from 2000 to 2006. We examined some of the factors affecting transfer of U and Th from soil to plants, differences in uptake of these radionuclides by different plants, relationships between U and Th in soil and in plants, and temporal variations of U and Th in different plant species. Concentrations of radionuclides (critical point for experimental studies on biogeochemistry of U and Th - rare trace elements in non-contaminated regions) and essential plant nutrients and trace elements were determined by instrumental neutron activation analysis.     

Chemical plant innovative safety investments decision-support methodology

Introduction

This article examines the extent to which investing in safety during the creation of a new chemical installation proves profitable.

Method

The authors propose a management supporting cost-benefit model that identifies and evaluates investments in safety within a chemical company. This innovative model differentiates between serious accidents and less serious accidents, thus providing an authentic image of prevention-related costs and benefits. In classic cost-benefit analyses, which do not make such differentiations, only a rudimentary image of potential profitability resulting from investments in safety is obtained.

Results

The resulting management conclusions that can be drawn from such classical analyses are of a very limited nature. The proposed model, however, is applied to a real case study and the proposed investments in safety at an appointed chemical installation are weighed against the estimated hypothetical benefits resulting from the preventive measures to be installed at the installation.

Conclusion

In the case-study carried out in question, it would appear that the proposed prevention investments are justified.

Impact on industry

Such an economic exercise may be very important to chemical corporations trying to (further) improve their safety investments.     

钢筋混凝土矩形梁在实际火灾下正截面承载力数值计算

为了正确评估钢筋混凝土矩形梁在实际火灾条件下的承载力,以一般室内火灾轰燃后的房间平均温度-时间曲线为火作用,以建筑结构耐火理论为基础,采用数值计算方法研究钢筋混凝土矩形梁的正截面承载力.研究结果表明:梁的承载力随火灾房间温度升高而变小,在温度达到最大值后承载力达到最小值.火灾房间火灾荷载越大,开口因子越小,火作用越大,梁的最小承载力越小;反之相反.相同条件下梁支座截面的承载力要大于跨中截面.     

Municipal solid waste management and short-term projection of the waste discard levels in Taiwan

Industrialization and urbanization result in significant changes in lifestyle. These lifestyle changes seem to lead to unsustainable consumption patterns and increase the generation of various kinds of environmental loads, especially the amount of municipal solid waste (MSW). Taiwan is a small island with scarce natural resources. The economic development in Taiwan has resulted in the generation of large amounts of MSW. As a result, the Taiwan Environmental Pollution Administration (TEPA) has produced regulations for waste minimization and has imposed several important policy measures that have successfully reduced the MSW discard rate in recent years and have established a public recycling network as a part of the MSW collection. Nowadays, the objective of the MSW policies in Taiwan is to develop a “zero-waste society.” This article aims to review the MSW management progress in Taiwan and to project future MSW discards up to 2011 based on the national plan and assumed scenarios for socioeconomic variables. According to the analysis results, a more sustainable consumption pattern can be proposed and the corresponding MSW management system can be planned so as to develop a low-waste-discard society.     

基于AIC准则优选AR模型研究我国生产事故

目前,由于生产力水平低,安全投入不足,安全监管体制不健全等因素,国内生产安全事故仍然居高不下.将基于AIC准则进行 AR 模型优选的方法应用到我国工矿死亡人数预测中,为事故预测统计提供一种新方法,预测结果将为预防生产安全事故提供依据.     

在役长输管道动态数据源组件(ADO)技术在剩余强度安全评定系统中的实现

采用Borland C++builder6.0开发工具,以英国标准BS7910剩余强度评价规范为蓝本,并结合实际应用特点,提出动态数据源组件(ADO)技术在该案例的应用,开发适用于以平面型缺陷为主的剩余强度安全评价系统。解决在役长输管道剩余强度安全评定系统中复杂数据的科学转换,实现软件接口的高效、通用性数据访问。根据评定结果与实际实验数据对比表明,该应用与实际误差达到工程检测设计标准。     

新疆艾比湖流域平原区景观土壤属性特征研究

以新疆艾比湖流域平原区为对象,在对研究区进行景观生态分类及野外调查验证的基础上,利用＂3S＂技术将1∶100×104的新疆土壤类型图与研究区景观类型图叠加,从土壤属性层次上对研究区各类景观的生态土壤类型进行确认,并分析其在研究区内分布的特征。结果表明：研究区主要土壤类型为26类,以石膏灰棕漠土所占比例最大,占研究区总面积的19.03%,棕钙土、荒漠风沙土、草甸盐土、盐化草甸土、和灌耕灰漠土等面积也较大。     

我国工业SO2排放趋势及影响因素分析

分析了我国工业SO2排放量的变化趋势,以及其与GDP、工业产值、火电厂发电量等指标的变化关系;利用50个省市1998—2007年的有关数据建立了SO2排放量的影响因素面板数据模型,力求通过定量分析识别影响我国工业SO2排放量的关键因素。研究表明,我国工业SO2排放量与第二产业比重、火力发电比重并无明显关系,而GDP、发电量、一次能源转化效率、SO2去除率存在显著关系,对SO2工业实际排放量起决定作用的是SO2的去除率。