厌氧氨氧化工艺脱氮及其污泥形态的研究

为研究厌氧氨氧化工艺对高浓度含氮废水的脱氮性能,在以聚乙烯海绵作为填料的上流式厌氧固定床反应器中利用人工配置高浓度含氮废水进行了实验研究.实验中通过添加充足无机碳源,实现了厌氧氨氧化反应器在总氮浓度900～1 210 mg/L长期稳定的运行,脱氮效率在80％以上,最高氮负荷为5.9 kg/m3·d.结果表明:充足的无机碳源在一定程度上可有效地降低高浓度亚硝氮对厌氧氨氧化菌的抑制作用.通过对污泥性状的研究,明确寻找出污泥上浮的原因所在.通过Stover-Kincannon模型确定系统动力学参数KB和Umax分别为30.2 g/L·d和2L2g/L·d,这将有助于对该厌氧氨氧化系统各控制条件的有效调节和准确设定,也为日后应用于实际工程中提供重要的理论依据.     

高校校园景观水体浮游植物调查与水质评价

对华侨大学厦门校区景观水体浮游植物群落结构和水质的理化指标进行了调查研究,结合生物监测和理化监测手段,基于浮游植物优势度、丰度和多样性指数的评价标准,对水体进行了生态评价。评价结果表明,水体受到一定程度的污染并出现富营养化现象。     

中国煤炭资源不同区带的生态环境特征

中国煤炭的“井”字型分布格局除了是对煤炭资源地质的、地理的、社会经济的区域分异现象,同时也基本是对不同煤炭资源发展区的生态环境特征进行区域上的归结。论文总结了不同煤炭资源发展区的生态环境特征和存在的主要生态环境问题。     

关于不锈钢酸洗废水处理的技术分析

随着社会经济的快速发展,不锈钢酸洗废水处理技术成为了当前的一项重要技术参数。本文旨在分析当前不锈钢酸洗废水的相关处理技术,从多种技术综合的应用出发,围绕当前工业发展的实际需要,多角度的分析不锈钢酸洗废水的技术,实现整体技术的全面运用。     

水中总氮空白的影响因素的探讨

本研究以水中总氮空白值为研究对象,不同厂家的过硫酸钾和不同试验用水条件下的总氮空白的变化规律。研究结果表明：无氨水和二次水蒸出来的总氮空白明显低于一次水蒸出来的总氮空白;这跟蒸馏水纯度有关系,一次水含有氨,所以消解时蒸馏水中的氨会被氧化,从而导致空白值偏高。同样有的厂家的过硫酸钾纯度不高,所以导致空白值高。     

宜昌市沮漳河流域当阳段水环境现状调查与评价

对宜昌市沮漳河流域当阳段的水环境进行了调查和评价。通过区域自然环境、社会经济发展、水体功能区、水环境容量等分析以及多个断面数据的监测,表明沮漳河流域当阳段水环境质量不能满足Ⅲ类水体功能区要求,主要超标因子为高锰酸盐指数、NHrN、BOD5、TP、石油类,主要受沿岸工业废水、生活污水及农业面源污染所致。     

辽河流域水环境压力及污染治理模式研究

系统分析了辽河流域近十年社会经济和水污染物排放之间的关系,基于污染物排放强度和人均GDP指标,建立辽河流域COD和氨氮环境学习曲线;结合情景分析法预测在现有治污水平下,辽河流域未来水污染物排放趋势及水环境压力。结果表明,辽河流域水环境压力巨大。根据辽河流域污染治理中存在的实际问题,提出新时期的污染治理模式。     

中水回用与效益分析

当前我国水资源供需矛盾日益加剧,实现中水利用是节约水资源的一条有效途径.通过分析中水水源、MBR处理技术及中水用途,结合一个高校实例,进行经济效益分析,并对建设中水回用系统的可行性进行论证.经计算可得效益费用比达到2.38,经济效益是非常明显的,具有实际的参考价值.中水回用不仅节约了水资源而且也产生了明显的经济效益,是城市发展的趋势.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.