T型氧化沟工艺处理低碳源生活污水的效果研究

详细介绍了T型氧化沟工艺的特征,并考察研究了该工艺处理低碳源生活污水的长期运行效果。研究结果表明,工艺出水COD、BOD5、NH3-N、TN和TP年平均浓度分别为13.9、3.8、0.91、18.80和1.67 mg/L,去除率分别为88.99%、94.37%、96.74%、37.57%和41.58%,均能达到相应的排放标准。由于T型氧化沟中以好氧环境为主,缺乏厌氧和缺氧环境以及进水的BOD5/TN值低,工艺对有机物及NH3-N的去除效果较好,但TN和TP去除效果较低。提出了加强工艺脱氮除磷的措施,为同类型污水处理厂改造提供参考。     

有机化改性海泡石对六六六吸附性能的探讨

分别采用阴阳离子表面活性剂对海泡石进行有机化改性处理,并对改性海泡石进行了吸附六六六实验.结果表明,未经有机化改性的海泡石对六六六各异构体去除能力由小到大依次为:γ-六六六(12.66%)、δ-六六六(12.79%)、α六六六(17.35%)、β-六六六(33.57%).经DOSO3Na有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、γ δ-六六六、α-六六六.经CTMAB有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、α-六六六、γ δ-六六六.有机化改性海泡石使体系中β-六六六大幅度增加,可能为有机化海泡石催化α、γ、δ各异构体向β异构体转化.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

KMnO4修饰面包酵母菌对Cd2+的吸附研究

研究了用KMnO4修饰面包酵母菌对溶液中Cd2+的吸附作用,探讨了不同KMnO4浓度、pH、吸附时间、Cd2+初始浓度、修饰酵母菌用量等5个因素对KMnO4修饰面包酵母菌吸附Cd2+的影响.结果表明,随着修饰剂KMnO4浓度的增大,修饰面包酵母菌的吸附能力增强,KMnO4浓度达到20 mmol·L-1时,吸附能力是相同...     

有机改性膨润土在印染废水处理中的应用

膨润土是一种非常有用的非金属矿物原料,其有机改性得到的有机改性膨润土可以较好地去除印染废水中的有机污染物和色度。本文综述了有机改性膨润土的制备方法及其在印染废水处理中的应用现状。     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

改性活性碳纤维电芬顿降解苯酚废水性能研究

采用微波改性、硝酸改性、磷酸改性及氨水改性等方法改性活性碳纤维(ACF-0),依次标记为ACF-1、ACF-2、ACF-3和ACF-4.以改性前后的活性碳纤维为阴极,电芬顿催化处理苯酚模拟废水,考察不同的改性方法对H2O2生成量、COD去除率、苯酚去除率及其中间产物的影响.结果表明,微波改性活性碳纤维的吸附性能及电催化活性最优,相比未改性活性碳纤维,经微波或酸碱改性后的活性碳纤维反应体系中,H2O2生成量均有所增加.苯酚在各电芬顿催化体系中的去除率大小依次是:ACF-1>ACF-3>ACF-4>ACF-2>ACF-0;COD去除率大小依次是:ACF-1>ACF-4>ACF-3>ACF-2>ACF-0,说明微波及酸碱改性有利于提高活性碳纤维的催化性能.此外,苯酚降解中间产物的生成也会受到改性方法的影响.     

垂直流人工湿地LDHs覆膜改性沸石基质强化除磷效果及其机制

采用碱性水热-共沉淀法,将6种金属化合物(CaCl2、ZnCl2、MgCl2、FeCl3、AlCl3、CoCl3)两两组合生成9种不同类型的层状双金属氢氧化物并覆膜于常用垂直流人工湿地沸石基质表面;利用分别填充原始沸石及9种LDHs覆膜改性沸石基质的模拟垂直流人工湿地小试系统进行除磷净化实验,并结合10种沸石基质的等温吸附实验结果,对LDHs覆膜改性沸石基质的强化除磷机制进行研究.结果表明,相对于原始沸石基质,9种不同组合方式生成的LDHs覆膜改性沸石基质除磷效果均有不同程度的提高;Zn2+参与合成的改性基质除磷效果优良,其中ZnFe-LDHs改性沸石基质对总磷、溶解性总磷及磷酸盐的平均去除率超过90%,其最大理论吸附量达到了原始沸石基质的3倍;LDHs覆膜改性沸石基质通过增加化学吸附容量、提高物理吸附能力达到强化除磷效果的目的.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.