碱熔法回收废催化剂中的钴、钼和铝

采用碱熔法从废钴钼催化剂中回收钴、钼和铝。该方法的工艺过程为 :将废催化剂与纯碱按质量比 1∶1 8混合 ,在焙烧温度 90 0℃条件下 ,焙烧 2h ;用 2倍于熔块的沸水浸取30min ;用稀硫酸调浸取液 pH至 6 ,浸取液中的铝形成氢氧化铝被回收 ;然后除盐并回收钼酸钠 ;使酸浸黑渣中的钴形成氢氧化钴并脱水氧化成为氧化钴。用该工艺回收铝、钼和钴 ,其回收率可达 95 %以上 ,回收产品的纯度可达 97%以上。     

重金属离子对酵母降解苯酚的影响

研究了铜、镉、锌和铅对酵母 (Pityrosporumsp .)降解苯酚的影响 .急性毒性试验表明 :Cu2 36h时对菌体生物量的毒性抑制微低于对苯酚降解的抑制 ;48h时对菌体生物量的毒性高于对苯酚降解的毒性 .受试时间段 ,Cd2 对菌体生物量的毒性均高于其对苯酚降解的毒性 .在 0— 36h内 ,Cu2 对菌体比增长速率的EC50 是 45 0nmol·l- 1 ,对苯酚降解速率的EC50 是 0 32nmol·l- 1 ;Cd2 相应的EC50 分别是 681nmol·l- 1 和 33 3nmol·l- 1 .Cu2 比Cd2 具有更高的毒性 .而锌和铅在低浓度时 ,对酵母降解苯酚过程中菌体生物量以及苯酚的降解均有促进作用 ,其促进作用随着金属离子浓度的增加而减弱 .     

Ca(Ⅱ)在活性污泥生物絮凝中的作用研究

采用4个平行的序批式反应器(SBR),研究了进水Ca2+浓度对活性污泥絮体表而特性和结构稳定性的影响,并由此来确定Ca2+在生物絮凝中的作用.结果表明:随着进水Ca2+浓度的增加,污泥中的Ca含量逐渐增大.进水中Ca2+的加入,增大了污泥絮体的粒径和密度,进南改善了污泥的沉降性能;Ca2+的加入,使可供结合的蛋白质数量最高增至近1倍,污泥表面疏水性也相应增强;污泥絮凝性能的改善,主要和可供Ca2+结合的蛋白质含量增加有关,而非多糖;EDTA通过络合污泥絮体中的Ca2+,破坏了山Ca2+架桥形成的污泥絮体结构,这说明Ca2+可通过和胞外聚合物(extracellular polymeric substances,EPS)中的负电官能团架桥来促进污泥絮体的形成并维持絮体结构的稳定性.     

Surface reaction of Bacillus cereus biomass and its biosorption for lead and copper ions

In this study, the surface chemical functional groups of Bacillus cereus biomass were identified by Fourier transform infrared （FTIR） analytical technique. It had been shown that the B. cereus cells mainly contained carboxyl, hydroxyl, phosphate, amino and amide functional groups. The potentiometric titration was conducted to explain the surface acid-base properties of aqueous B. cereus biomass. The computer program FITEQL 4.0 was used to perform the model calculations. The optimization results indicated that three sitesthree pKas model, which assumed the cell surface to have three distinct types of surface organic functional groups based on the IR analysis results, simulated the experimental results very well. Moreover, batch adsorption experiments were performed to investigate biosorption behavior of Cu（Ⅱ） and Pb（Ⅱ） ions onto the biomass. Obviously, the adsorption equilibrium data for the two ions were reasonably described by typical Langmuir isotherm.     

Di（2-ethylhexyl）phosphoric acid-coconut oil supported liquid membrane for the separation of copper ions from copper plating wastewater

Permeation of Cu(II) from its aqueous solution through a supported liquid membrane (SLM) containing di(2-ethylhexyl)phosphoric acid (D2EHPA) carrier dissolved in coconut oil has been studied. The effects of Cu(II), pH (in feed), H2SO4 (stripping) and D2EHPA (in membrane) concentrations have been investigated. The stability of the D2EHPA-coconutoil has also been evaluated. High Cu(II) concentration in the feed leads to an increase in flux from 4.1 × 10-9 to 8.9 × 10-9 mol/(m2·s) within the Cu(II) concentration range 7.8×10-4-78.6×10-4 mol/L at pH of 4.0 in the feed and 12.4 × 10-4 mol/L D2EHPA in the membrane phase. Increase in H2SO4 concentration in strip solution leads to an increase in copper ions flux up to 0.25 mol/L H2SO4, providing a maximum flux of 7.4 × 10-9 mol/(m2·s). The optimum conditions for Cu(II) transport are, pH of feed 4.0, 0.25 mol/L H2SO4 in strip phase and 12.4 × 10-4 mol/L D2EHPA (membrane) in 0.5 (m pore size polytetrafluoroethylene (PTFE) membrane. It has been observed that Cu(II) flux across the membrane tends to increase with the concentration of copper ions. Application of the method developed to copper plating bath rinse solutions has been found to be successful in the recovery of Cu(II). rane. It     

Elemental Contamination of Rainwater by Airborne Dust in Tamale Township Area of the Northern Region of Ghana

Rainwater samples were collected from Tamale town in the 1997 and 1998 rainy seasons. During this period road construction in the Tamale area resulted in the generation of suspended dust in the atmosphere. Analysis of the samples for major ions showed elevated levels of Cl^–. Ion ratios with Cl^– (Na⁺/Cl^–, K⁺/Cl^–, Ca²⁺/Cl^–/Cl^– Mg²⁺/Cl^– and SO₄ ^2–/Cl^–) in rainwater samples were higher than the corresponding ratios in seawater. Some samples also showed elevated concentrations of Fe, Mn, Al and Zn, all of which except Zn showed a correlation with the dry periods between rainfall events. Consequently, it was concluded that dust generated from lateritic soils was probably the major cause of the increase in concentration of these metals. Aluminium and Fe concentrations were observed to be higher than the World Health Organization drinking water guide limits.     

可变电荷土壤和恒电荷土壤Cl-吸附特性的研究

对不同浓度KCl和不同pH下,3种可变电荷土壤和4种恒电荷土壤Cl-吸附量进行了测定。结果表明,土壤Cl-吸附量随平衡Cl-浓度C（e）增加而增大,恒电荷土壤呈线性,可变电荷土壤在添加Cl-0.5~5.0mmol/L下,符合Langmuir吸附等温式。同一浓度下的Cl-吸附量及其随浓度增加的速率均为砖红壤>红壤>赤红壤>黄棕壤>棕壤、暗棕壤和黑土,与这些土壤所带正电荷量顺序相一致。Langmuir方程K值较小且几种土壤差异不大。恒电荷土壤对Cl-的吸附量很小,在浓度较低时常出现负吸附,其吸附机理可能更多的是与K+吸附时的同时吸附。7种土壤Cl-吸附量均随pH增加而降低,但降低强度可变电荷土壤远大于恒电荷土壤。     

金属络合剂在烟气同时脱硫脱硝中的应用

液相络合法是烟气同时脱硫脱硝中广泛应用的方法之一。液相络合法常用的金属络合剂有亚铁络合剂和钴络合剂等。重点介绍了亚铁氨羧络合剂、含-SH的亚铁络合剂和六氨合钴络合剂、乙二胺合钴络合剂等同时脱硫脱硝的基本过程及常用吸收液的再生方法,指出了金属络合剂在烟气同时脱硫脱硝中应用时存在的问题及今后的发展方向。     

用废锂电池制备Co3O4

将废锂电池正极用酸溶解,再分别采用分步沉淀法和吸附沉淀法去除废锂电池液中的Fe^3＋,Al^3＋,Ca^2＋,Mg^2＋,抽滤后得到含CoSO。的滤液;用NaHCO3作沉淀剂,对CoSO4滤液进行沉淀反应,将得到的沉淀物过滤、洗涤、干燥后得CoCO4粉末;将CoCO4粉末进行煅烧后得Co3O4粉末。实验得出的制备CoCO4粉末的最佳工艺条件：反应温度50℃,用NaHCO,作沉淀剂;制备Co3O4粉末的最佳工艺条件：煅烧温度600℃,煅烧时间大于4h。在该条件下得到的Co3O4粉末符合锂电池生产的要求。     

重金属离子的生物吸附容量与离子性质之间的关系

利用金属离子毒性评价和预测领域中的QSAR方法,探讨了重金属离子性质对生物吸附容量的影响．选用啤酒工业废弃的酿酒酵母为生物吸附剂,进行了10种金属离子Ag^＋,Cs^＋,Zn^＋,Pb^2＋,Ni^2＋,Cu^2＋,CO^2＋,Sr^2＋,Cd^2＋,Cr^3＋的生物吸附实验．选用22种参数来表征金属离子的物理化学性质,建立了金属的离子特性与生物吸附容量之间的关系．利用Langmuir方程计算得到酵母吸附金属离子的理论最大吸附量qmax,由大到小排序为Pb^2＋〉Ag^＋〉Cr^3＋〉Cu^2＋〉Zn^2＋〉Cd^2＋〉Co^2＋〉Sr^2＋〉Ni^2＋〉Cs^＋．离子性质与吸附量之间的线性拟合分析结果表明,共价指数Xm^2r与qmax具有良好的线性关系,共价指数越高,离子吸附量越大,金属离子与吸附剂表面官能团共价结合所占比重越大,键结合越牢固．对金属离子进行分类（按价态或离子的软硬性质）可以改善拟合效果．极化力Z^2／r、水解常数｜lgKOH｜、电离势,尸等多种物化性质与不含软离子的离子之间的理论最大吸附量也表现出良好的线性关系．