Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

难切削零件的冷挤压工艺

以“尾钉”为例 ,分析高温合金的难切削工艺特点 ,设计合理可行的冷挤压工艺     

酸碱度变化对日本三角涡虫生存及再生的影响

用自来水和去离子水配制不同的pH溶液，测定涡虫生存及再生的情况，以及涡虫可承受的pH变化幅度，确定日本三角涡虫对不同酸碱环境的耐受性。结果表明涡虫对酸碱环境的耐受力较强。     

冷轧带钢轧辊温度场及其控制

分析了冷轧过程中工作辊的温度变化及热凸度的形成 ,提出了控制热凸度的有效手段 ,对完善板型控制系统具有重要的意义     

载甲苯活性炭微波脱附再生试验

研究了利用微波对载甲苯饱和活性炭的辐照再生。从甲苯的脱附和回收率2个方面探讨了活性炭再生的工艺条件。得出工艺的最佳条件：微波功率为500W、载气流速为300mL／min、辐射时间3min、活性炭量为10g。     

冷原子吸收光度法测定工业用浓盐酸中痕量汞

通过进样管道的设计,可能存在的干扰,以及工作参数的详细研究,建立了用冷原子吸收光度法直接测定工业用浓盐酸中痕量汞的分析方法。实际样品测定结果表明,该方法可靠,准确可行。     

QUALITY OF HYDROMETEOROLOGICAL DATA IN COLD REGIONS1

ABSTRACT: Many users of hydrometeorological records are not aware of the number of inconsistencies and biases that occur in hydrometeorological records. Examples are presented illustrating how the exposures of sites for measurement of precipitation, wind, snow on the ground, and evaporation determine to a large extent how useful the records are for estimating areal conditions. For areas where precipitation in the form of snow produces a significant portion of the runoff, a smaller number of quality records may be more valuable for modeling than a much larger number of records of lower quality. Information is presented to show that the overall value of an operational hydrometeorological network is dependent upon how consistent and representative of average conditions the collected records are, especially for mountainous areas in cold regions.     

改性沸石用于饮用水除氟的试验研究

试验针对存在的氟污染饮用水问题,将天然沸石用NaOH和Al2（SO4）3溶液改性制成除氟材料.静态试验研究表明：改性沸石除氟吸附反应快,其最佳pH值范围为5～9,而且对氟离子具有较好的离子选择性能.通过动态试验研究发现,降低进水流量和原水浓度可以增大滤层的吸附容量.两种再生方式对比试验表明：用Al2（SO4）3溶液再生效果优于用NaOH和Al2（SO4）3溶液联合再生.     

船舶柴油机选择性催化还原积碳臭氧直接氧化再生

为解决船舶柴油机SCR催化剂积碳再生问题,提出了臭氧直接氧化再生的方法。实验用玻璃纤维无胶滤筒采集PM,然后在管式炉中用臭氧氧化滤筒中的PM,研究了温度和臭氧浓度对PM氧化的影响。实验表明,臭氧的最佳氧化温度窗口为200~240℃,PM氧化速度随臭氧浓度提高明显加快,PM氧化率可以达到92%以上。根据实验结果,提出了船舶柴油机SCR积碳O3低温再生技术方案。     

利用原生质体诱变技术筛选脱落酸高产菌株

以葡萄孢属TB-3菌株为出发菌株制备其原生质体．在纤维素酶浓度为20g／L,蜗牛酶浓度为3g／L的酶解系统中,25℃酶解3h,其原生质体制备数可达67×105mL-1,在KYM上的再生率为46．1％,在KPDA上的再生率为33．6％,经过3轮原生质体紫外线诱变后回复再生,及对大量再生突变株进行发酵筛选,获得高产稳定株TB－3H8,其发酵液中ABA的质量浓度可达1．4g／L