乙草胺、铜污染共存对土壤甲胺磷蚯蚓降解过程的影响研究

为揭示利用蚯蚓活动强化甲胺磷降解的可行性,采用了微宇宙培养方法,通过有蚯蚓和无蚯蚓的对比实验,考察了乙草胺和铜分别与甲胺磷共存条件下污染黑土中甲胺磷降解过程的动态变化.结果表明,无论是否加入蚯蚓,甲胺磷单一污染的土壤中甲胺磷的降解符合一级反应动力学规律;蚯蚓活动能促进甲胺磷降解过程的进行.土壤中乙草胺或铜与甲胺磷共存时,均明显地干扰了甲胺磷降解过程随时间的动态变化;根据化学结构分析,推测两者对甲胺磷降解规律的影响机制可能类似.铜与甲胺磷复合污染的土壤中甲胺磷含量明显高于乙草胺与甲胺磷复合组,说明铜较乙草胺对土壤甲胺磷降解过程的延缓作用更强.     

序批式活性污泥法及其发展

SBR及其发展工艺具有其它工艺无可比拟的优势，特别是其良好的除磷脱氮功能。本文介绍了SBR及其发展工艺各自的工艺特点、优势及不足之处，为它们在生产实践中的进一步推广应用提供技术参考。     

化学法处理含酚废水的组合工艺系统和条件研究

采用化学法组合的三种工艺系统,对含酚废水进行了工艺条件的研究。结果表明,对于浓度<30mg/l含酚废水,采用氧化凝聚处理是有效的;而对于30～80mg/l含酚废水,选用氧化凝聚和吸附组合的工艺系统处理,能使排放水中酚和COD达标。     

生物滤池和常规工艺对某地表水中不同分子量有机物的去除

采用生物滤池和常规处理对受污染的某地表水进行试验研究 ,用膜过滤法对其出水进行了分子量分析 ,考察了 2个处理单元对不同分子量区间有机物的去除效果。结果表明 :原水中分子量小于 1 0 0 0的有机物占总 DOC的 78.2 9% ;生物滤池对分子量小于50 0、50 0～ 1 0 0 0和 >60 0 0 0的有机物去除率分别为 54.9%、36.1 %和 2 0 .7% ;常规处理对以上分子量区间有机物的去除率分别为1 5.3%、- 2 0 %和 48.75%。     

宁夏盐池县社会经济与环境协调发展的策略分析

本文通过分析宁夏盐池县的自然条件、自然资源以及社会经济发展与环境的关系,应用权图影响结构模型对该县社会经济与环境系统进行了定量的分析与研究。建立了7个模型,并通过预测、比较实施不同发展策略后各模型的系统状态,找出了使系统优化运行的灵敏调控点,分析了各分项调整策略之间相互制约、相互促进的关系,提出了使该县社会经济与环境协调发展的策略。     

对中国城市环境地质工作的思考

本文回顾了国内外城市地质工作的发展历程，阐述了中国城市地质工人的发展方向和重点工作领域。指出城市地质工作必须服务于城市（城市群，经济开发区）的规划，建设和管理，为城市社会经济可持续发展，减灾防灾提供具有针对性，实用性和超前性的基础地质资料和成果。由于中国城市的规模，性质，自然资源承载力，地质环境特征不同，城市环境地质调查，评价的对象，内容也将有所差异。归纳起来，城市地质的重点工作领域为：城市可持续发展，城市可持续发展的资源开发战略与对策，城市地质环境容量及脆弱性分析。城市地质灾害：城市地质灾害风险，影响面，易损性及对灾害的反应，城市环境变化的地质指标体系，城市环境地质综合研究：城市环境地质调查评价的新理论，新方法，新技术，城市环境地质图纱的编制。数字城市环境地质：GIS平台上的地质空间数据库，城市地质环境动态分析，评价，决策系统和地质灾害预警预报系统。     

Comparison of UV-based advanced oxidation processes for the removal of different fractions of NOM from drinking water

This study examined the effectiveness for degradation of hydrophobic (HPO), transphilic (TPI) and hydrophilic (HPI) fractions of natural organic matter (NOM) during UV/H₂O₂, UV/TiO₂ and UV/K₂S₂O₈ (UV/PS) advanced oxidation processes (AOPs). The changing characteristics of NOM were evaluated by dissolved organic carbon (DOC), the specific UV absorbance (SUVA), trihalomethanes formation potential (THMFP), organic halogen adsorbable on activated carbon formation potential (AOXFP) and parallel factor analysis of excitation–emission matrices (PARAFAC-EEMs). In the three UV-based AOPs, HPI fraction with low molecular weight and aromaticity was more likely to degradate than HPO and TPI, and the removal efficiency of SUVA for HPO was much higher than TPI and HPI fraction. In terms of the specific THMFP of HPO, TPI and HPI, a reduction was achieved in the UV/H₂O₂ process, and the higest removal rate even reached to 83%. UV/TiO₂ and UV/PS processes can only decrease the specific THMFP of HPI. The specific AOXFP of HPO, TPI and HPI fractions were all able to be degraded by the three UV-based AOPs, and HPO content is more susceptible to decompose than TPI and HPI content. UV/H₂O₂ was found to be the most effective treatment for the removal of THMFP and AOXFP under given conditions. C1 (microbial or marine derived humic-like substances), C2 (terrestrially derived humic-like substances) and C3 (tryptophan-like proteins) fluorescent components of HPO fraction were fairly labile across the UV-based AOPs treatment. C3 of each fraction of NOM was the most resistant to degrade upon the UV-based AOPs. Results from this study may provide the prediction about the consequence of UV-based AOPs for the degradation of different fractions of NOM with varied characteristics.     

Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Improving the Urban Stream Restoration Effort: Identifying Critical Form and Processes Relationships

Stream restoration projects are often based on morphological form or stream type and, as a result, there needs to be a clear tie established between form and function of the stream. An examination of the literature identifies numerous relationships in naturally forming streams that link morphologic form and stream processes. Urban stream restoration designs often work around infrastructure and incorporate bank stabilization and grade control structures. Because of these imposed constraints and highly altered hydrologic and sediment discharge regimens, the design of urban channel projects is rather unclear. In this paper, we examine the state of the art in relationships between form and processes, the strengths and weaknesses of these existing relationships, and the current lack of understanding in applying these relationships in the urban environment. In particular, we identify relationships that are critical to urban stream restoration projects and provide recommendations for future research into how this information can be used to improve urban stream restoration design. It is also suggested that improving the success of urban restoration projects requires further investigation into incorporating process-based methodologies, which can potentially reduce ambiguity in the design and the necessity of using an abundant amount of in-stream structures.