The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

Organic residue decomposition: The minicontainer-system a multifunctional tool in decomposition studies

The Minicontainer-test, first described by Eisenbeis (1993), was designed to study the kinetics of organic residue decomposition at a microsite level. It is derived from the litterbag technique and consists of polyethylene minicontainers (volume about 1.5 cm³) filled with a test substrate (litter, straw, cellulose, etc.). The minicontainers (MCs) are closed at either end with plastic gauze discs of variable mesh size (e.g. 20 μm, 250 μm, 500 μm or 2 mm). A definite number of such units are inserted into PVC-bars, which can be implanted into the soil horizontally or vertically, or be exposed on the soil surface horizontally. The bars are very stable and can be exposed in different environments for months to years. If required, the bars can be removed temporarily and stored, e.g. during soil cultivation. Should fresh litter be used, two phases of decomposition can be distinguished: a fast initial phase, which can be mainly related to the effect of leaching, and a second slow phase depending mainly on the activity of soil organisms and litter quality. Several questions can be addressed to investigations using MCs, e.g. 1) parts of the soil fauna which are involved in decomposition (nematodes, microarthropods, and smaller specimens of the macrofauna, e.g. enchytraeidae, diplopods and dipteran larvae) can be extracted from the litter substrate using a miniscale high gradient extractor, 2) the organic mass loss of litter can be determined, 3) microbial biomass (C_mic, N_mic) can be assessed by fumigation extraction and 4) microbial activity (respiration) in the test substrate can also be assessed by use of standardised methods. Compared to litterbag studies, the larger number of small replicate units improves the statistical evaluation. Until today the Minicontainer-test has been applied in forestry and agriculture, e.g. studying the effects of liming, soil restoration and the application of insecticides, e.g. Diflubenzuron (Dimilin) and Btk (Bacillus thuringiensis var.kurstaki).     

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用王飞越（北京大学城市与环境学系，北京１００８７１）陈雁飞（武汉大学环境科学系）最近几十年来，有机物结构──活性定量关系研究（ＱＳＡＲ，ＱｕａｎｔｉｔａｔｉｖｅＳｔｒｕｃｔｕｒｅ－Ａｃｔｉｖ...     

改性粉煤灰及其处理废水的机理

应用正交设计的基本理论,研究了PDMDAAC(聚二甲基二烯丙基氯化铵)改性粉煤灰的最佳条件,并将改性粉煤灰用于模拟印染废水的处理,探索了改性粉煤灰处理废水的机理。结果表明,在原PDMDAAC的pH下．控制PDMDAAC的浓度为40g／L,恒温30℃．反应1h为最佳改性工艺,改性粉煤灰处理废水的机理以吸附电中和为主。     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

钢铁窑炉烟尘PM_(2.5)控制技术与装备

简述了国家863课题"钢铁窑炉烟尘PM_(2.5)控制技术与装备"的目的、意义和研究成果,介绍了细颗粒物预荷电技术、基于海岛纤维的表面超细过滤材料、预荷电袋滤器、"一阀多喷"清灰等技术的最新进展,通过示范工程的成功运行,验证了成果的先进性和实用性。研究成果将为工业窑炉烟尘细颗粒物深度净化提供技术和装备支撑,适用于新建除尘项目和除尘项目改造。     

基于OPMSE与BAT的啤酒行业排放限值仿真

以OPMSE仿真计算啤酒行业排放污水中COD,BOD,NH3-N质量浓度为研究对象,查询及调研清河流域典型啤酒行业产生污水中COD,BOD,NH3-N质量浓度范围,经BAT处理后通过OPMSE的仿真计算,得出排放污水中污染物质量浓度正态分布置信区间、最佳出水及最差出水质量浓度。结果表明:置信水平为99%时,COD,BOD,NH3-N的置信区间分别为(75.83,95.95),(19.30,25.88),(5.68,6.85);最佳出水质量浓度分别为4.14 mg/L,5.36 mg/L,2.71 mg/L;最差出水质量浓度分别为20.64 mg/L,20.70 mg/L,10.86mg/L。将仿真结果与现有排放标准对比,拟定啤酒行业的污染物直接排放限值为COD=100 mg/L,BOD=30mg/L,NH3-N=8 mg/L;间接排放限值为COD=400 mg/L,BOD=80 mg/L,NH3-N=25 mg/L。     

钢铁企业循环经济影响因素及作用路径研究

基于企业实力、环境管制、公众参与及绿色竞争等理论,提出了钢铁企业循环经济影响因素及作用路径研究模型,并采用偏最小二乘路径分析法,以我国54家钢铁企业2013年数据为例展开实证研究。结果表明:企业特征因素、市场竞争因素、政府因素对钢铁企业循环经济发展水平有直接影响,且影响效应依次递减;公众因素对循环经济发展水平有间接影响,且影响效应较低。同时,验证了此方法的科学性与适用性。     

生化防护材料的探讨

本文详述了生化防护材料的种类、性能特点,与防护服配件的协调、使用耐久性能以及成本等问题,得出了生化防护材料选用及设计的一般性结论。     

采掘诱发地震的成因及对策

根据煤或岩体的赋存特征及采动后的受力特点，将采矿及掘进等工程进行过程中诱发的地震灾害分为三类，即完整煤岩体受压应力作用的失稳、顶底板受拉应力型地震及断层走滑受剪型诱发地震。文章在分别分析其成因的基础上，研究了采矿诱发三种类型地震的发生条件，提出了防治发生诱发地震的对策。