聚苯乙烯外墙保温系统火灾风险影响因素分析

为了研究聚苯乙烯外墙保温系统火灾风险的问题,对比了3种火灾测试方法,分别是基于ISO 5660的小尺寸锥形量热计实验方法、基于ISO 9705的大尺寸实验方法和基于BS 8414的全尺寸实验方法。讨论了3种方法评测外墙保温系统火灾风险的适用性,进一步在比较分析热释放速率、临界热流强度、火蔓延情况、火灾行为以及实验后样品完整性等参数的基础上,得到了影响聚苯乙烯外墙保温系统火灾风险的关键因素。结果表明:虽然空腔的形成在此类系统火灾中不可避免,但系统保护层的严密性和完整性决定了空腔火蔓延的危险性以及聚苯乙烯在系统内的融化流动及燃烧特性。针对聚苯乙烯外墙保温系统火灾风险影响因素,进一步给出了此类系统的防火措施。     

间距对上保护层开采保护效果影响的相似模拟实验研究

为研究上保护层开采保护效果随层间距的变化规律,以南桐矿区作为实验背景,保持保护层倾向工作面开挖长度、煤层埋深、倾角、岩层物理力学性质相同,将层间多层岩层处理为复合岩层,分别进行近距离、远距离和超远距离上保护层开采相似模拟实验。综合分析被保护层卸压规律及基于被保护层垂直于层面的膨胀变形保护准则所得保护范围可知:上保护层开采被保护层卸压曲线呈“凸形”,且“凸形”中心线偏向下山方向。随层间距增加,“凸形”底部被保护层小于原岩应力的卸压范围与“凸形”顶部卸压曲线顶部较大卸压的范围均呈减小趋势;两者中心位置均向下山方向转移,且后者转移度大于前者;被保护层卸压曲线中卸压范围的卸压程度及应力集中范围的应力集中程度均呈减弱趋势;以垂直层面的膨胀变形量3‰确定的上下边界膨胀变形保护角均小于《防治煤与瓦斯突出规定》中相应条件的卸压角,因此以该方法确定的保护范围相对《防治煤与瓦斯突出规定》偏于安全,且随层间距增加保护范围长度呈加速减小趋势。     

热力管加热桥面抗冰融冰试验研究

为了研究热力管加热桥面抗冰融冰对于公路交通安全的影响,制作了尺寸为600 mm×600 mm×380 mm的桥梁试件,在人工环境室对热力管融冰进行了模型试验。结果表明:试件上表面温升速率和融冰时间取决于热力管间距、隔热层、风速、环境温度和热力管外表面温度。在相同工况条件下,100 mm间距的热力管融冰能力要大于150 mm间距的热力管,无隔热层时,100 mm间距热力管向上传递的热量占总加热量的13.4%,融冰时间为211 min;150 mm间距热力管向上传递的热量占总加热量的18.3%,融冰时间为271 min。在热力管层下面铺设厚度为2 mm、导热系数为0.062 W/（m· K）的隔热材料后,100 mm间距热力管向上传递的热量占总加热量的46.9%,融冰时间为175 min;150 mm间距热力管向上传递的热量占总加热量的51.9%,融冰时间为161 min。热力管层铺设隔热材料可有效阻止热量向下传递,从而缩短融冰时间。     

建筑环境中的风能利用研究进展

从分析建筑环境中的风能特点出发,阐述了建筑环境中风能利用的可能性,介绍了建筑环境中风能利用的主要方式为自然通风排气和风力发电。针对风力发电形式,从建筑风环境的模拟、建筑强化和集结风能的性能研究、适宜建筑环境的风力机研究以及建筑环境中的风力发电效益评估四个方面,系统总结了建筑环境中风能利用的研究现状及应用实例。在此基础上,提出了若干有待进一步研究解决的问题,为建筑环境中风能利用技术的推广应用提供参考。     

Sensitivity analysis of North American bird population estimates

The Partners in Flight North American Landbird Conservation Plan provided estimates of population sizes for 448 landbird species using a multiplicative model. Input parameters in this calculation included the area of state × Bird Conservation Region polygons, area-specific mean Breeding Bird Survey counts circa 1995, and adjustment factors for the distance over which species may presumably be correctly counted, the assumed pairing of singing males with non-singing females, and variability in the propensity of birds to sing over the course of the survey day. I assessed the sensitivity of this population calculation to changes in the input parameters. I assessed both local and global sensitivity of the model to changes in the parameters with Monte Carlo one-at-a-time simulations and the Fourier amplitude sensitivity test (FAST). Monte Carlo simulations were an estimate of local model sensitivity whereas FAST estimated global model sensitivity, accommodating the potential shared variance between model parameters. Monte Carlo simulations suggested population estimates were 39% more sensitive to changes in the detection distance adjustment than to the other parameters; the other parameters were nearly equal in their contribution to model sensitivity. Conversely, FAST analysis determined that each of the input variables aside from the pair adjustment provided roughly equal contributions to variability in population estimates. The most efficient means for improving continental population estimates for birds surveyed by the Breeding Bird Survey will be through increased scrutiny of the species-specific distance detection and time-of-day adjustments and improved understanding in the spatial and temporal variability in the mean Breeding Bird Survey count.     

彗星试验检测区域水源有机污染致突变量(Study on Mutagenic Threshold of Organic Pollutants in Typical Water Area by Comet Assay)

采用彗星试验检测了区域水源有机污染对人血淋巴细胞的致突变性,探讨了水源风险的评价方法.结果表明:Cr(VI)对人外周血淋巴细胞有强的致突变作用,并具有明显的剂量-效应关系;Cr(VI)剂量的对数与人外周血淋巴细胞DNA损伤的程度呈线性相关.可以用Cr(VI)作为阳性参照物量化表征水中有机污染混合物对人血淋巴细胞的致突变性.现行《地表水环境质量标准》、《污水综合排放标准》中Cr(VI)的限值可以用于评价水体中有机污染对人体健康的风险.     

高加速寿命试验技术发展现状及应用展望

分析梳理了高加速寿命试验技术的国内外研究现状,介绍了高加速寿命试验的试验方法、基本原理、应力极限等关键问题。剖析了高加速寿命试验与加速寿命试验的联系与区别,阐述二者在试验原理、试验条件、应用目的方面的不同。最后提出未来对HALT的研究可以从发展面向元器件的高加速寿命试验技术、拓展高加速寿命试验的应用范围和途径、建立标准的HALT技术体系几个方面发展。     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

改性植被混凝土基材力学与植生试验研究

为探明羧甲基纤维素钠(CMC)与麦秸秆纤维对植被混凝土基材力学与植生性能的影响,通过直剪试验、植生试验研究了改性后植被混凝土基材(简称改性基材)的抗剪性能与黑麦草生长性能.结果 表明:①改性基材的剪切强度随CMC掺量的增加呈先增后减的变化趋势,0.5％CMC掺量时基材的剪切强度出现峰值,而随纤维掺量的增加改性基材剪切强...     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.