高含硫天然气勘探开发潜在危害分析与防范

川东北地区大型天然气矿藏中硫化氢含量较高,且带有高剧毒性和高腐蚀性,勘探开发难度较大。同时气田所处区域的岩土条件十分脆弱,洪涝、大风、冰雹等气候灾害经常发生,易引发泥石流、滑坡,形成地质灾害。另外气田所在地人口密度大,给勘探开发设施布局和居民安全带来很大困难。文章通过对川东北地区天然气勘探、开发过程中存在的潜在危害进行详细分析,提出风险防范技术与对策,以供参考。     

CFD分析在烟气脱硫中的实际运用与研究

为降低某公司烧结机干法脱硫装置烟道阻力,减少引风机出力,实现节能优化,运用计算流体力学软件,对引风机出口烟道内流场进行三维数值模拟,并根据分析结果进行烟道的优化改造。改造后,吸收塔入口负压由-200Pa提升至-560Pa,风机电流由328A降为301.4A,节能降耗显著。     

遗传投影寻踪回归在城市环境质量评价中的应用

引入投影降维的思想,将遗传投影寻踪与回归分析技术运用到城市环境质量评价中。将此技术与神经网络方法进行实例比较,投影寻踪回归方法不但可以合理地作出环境质量的综合评价,而且消除了神经网络方法中类别判断不够精确的影响。     

基于RS和GIS的山东省17城市生态环境质量动态变化研究

运用遥感动态监测与地理信息系统技术相结合的方法,以2005年和2009年遥感解译数据、土地侵蚀数据及环境统计数据为数据源,依据《生态环境状况评价技术规范(试行)》(HJ/T192-2006),对山东省17个城市生态环境质量现状及动态变化趋势进行了评价。结果表明:2009年17个城市生态环境状况指数在59.81～78.08之间,生态环境质量状况总体良好;2005-2009年17城市生态环境状况指数变化值在0.06～3.5之间,生态环境质量状况基本稳定。     

秦皇岛市“创模”对策研究及效益分析

介绍了秦皇岛市创建国家环境保护模范城市的意义,重点阐述了完成创模任务的主要对策,包括:构建以旅游业为中心、特色产业互融互促的现代产业体系;加快城乡一体化建设;提升城镇发展质量和水平;加强重大基础设施建设;积极推广清洁能源,深入开展工程节能;积极推进循环经济发展等。秦皇岛市创建国家环境保护模范城市,将会在环境、经济和社会三方面产生明显的综合效益。     

Comparison of the Performance of Statistical Models in Forecasting Monthly Total Dissolved Solids in the Rio Grande1

Abudu, S., J.P. King, Z. Sheng, 2011. Comparison of the Performance of Statistical Models in Forecasting Monthly Total Dissolved Solids in the Rio Grande. Journal of the American Water Resources Association (JAWRA) 48(1): 10‐23. DOI: 10.1111/j.1752‐1688.2011.00587.x Abstract: This paper presents the application of autoregressive integrated moving average (ARIMA), transfer function‐noise (TFN), and artificial neural networks (ANNs) modeling approaches in forecasting monthly total dissolved solids (TDS) of water in the Rio Grande at El Paso, Texas. Predictability analysis was performed between the precipitation, temperature, streamflow rates at the site, releases from upstream reservoirs, and monthly TDS using cross‐correlation statistical tests. The chi‐square test results indicated that the average monthly temperature and precipitation did not show significant predictability on monthly TDS series. The performances of one‐ to three‐month‐ahead model forecasts for the testing period of 1984‐1994 showed that the TFN model that incorporated the streamflow rates at the site and Caballo Reservoir release improved monthly TDS forecasts slightly better than the ARIMA models. Except for one‐month‐ahead forecasts, the ANN models using the streamflow rates at the site as inputs resulted in no significant improvements over the TFN models at two‐month‐ahead and three‐month‐ahead forecasts. For three‐month‐ahead forecasts, the simple ARIMA showed similar performance compared to all other models. The results of this study suggested that simple deseasonalized ARIMA models could be used in one‐ to three‐month‐ahead TDS forecasting at the study site with a simple, explicit model structure and similar model performance as the TFN and ANN models for better water management in the Basin.     

Watershed Regressions for Pesticides (warp) Models for Predicting Atrazine Concentrations in Corn Belt Streams1

Stone, Wesley W. and Robert J. Gilliom, 2012. Watershed Regressions for Pesticides (WARP) Models for Predicting Atrazine Concentrations in Corn Belt Streams. Journal of the American Water Resources Association (JAWRA) 48(5): 970‐986. DOI: 10.1111/j.1752‐1688.2012.00661.x Abstract: Watershed Regressions for Pesticides (WARP) models, previously developed for atrazine at the national scale, are improved for application to the United States (U.S.) Corn Belt region by developing region‐specific models that include watershed characteristics that are influential in predicting atrazine concentration statistics within the Corn Belt. WARP models for the Corn Belt (WARP‐CB) were developed for annual maximum moving‐average (14‐, 21‐, 30‐, 60‐, and 90‐day durations) and annual 95th‐percentile atrazine concentrations in streams of the Corn Belt region. The WARP‐CB models accounted for 53 to 62% of the variability in the various concentration statistics among the model‐development sites. Model predictions were within a factor of 5 of the observed concentration statistic for over 90% of the model‐development sites. The WARP‐CB residuals and uncertainty are lower than those of the National WARP model for the same sites. Although atrazine‐use intensity is the most important explanatory variable in the National WARP models, it is not a significant variable in the WARP‐CB models. The WARP‐CB models provide improved predictions for Corn Belt streams draining watersheds with atrazine‐use intensities of 17 kg/km² of watershed area or greater.     

In vitro toxicity of fungicides with different modes of action to alfalfa anthracnose fungus,Colletotrichum destructivum

Abstract

Sensitivity of 24 isolates of Colletotrichum destructivum O’Gara, collected from alfalfa plants in Serbia, to eight selected fungicides, was investigated in this study. Molecular identification and pathogenicity test of isolates tested were also performed. Fungicide sensitivity was evaluated in vitro, using mycelial growth assay method. All isolates exhibited significant pathogenicity, causing necrosis at the alfalfa seedling root tips two days after inoculation. Using the primer pair GSF1-SR1 and by comparing the amplified fragments of the tested isolates with the marker (M), the presence of the amplicon of the expected size of about 900?bp was determined for all isolates. The isolates tested in this study showed different sensitivity towards fungicides in vitro. Mycelial growth was highly inhibited by QoI (quinone outside inhibitors) fungicide pyraclostrobin (mean EC₅₀=0.39?µg mL^?1) and by DMI (demethylation-inhibiting) fungicide tebuconazole (mean EC₅₀=0.61?µg mL^?1), followed by azoxystrobin (mean EC₅₀=2.83?µg mL^?1) and flutriafol (mean EC₅₀=2.11?µg mL^?1). Multi-site fungicide chlorothalonil and MBC (methyl benzimidazole carbamate) fungicide thiophanate-methyl evinced moderate inhibition with mean EC₅₀=35.31 and 62.83?µg mL^?1, respectively. Thirteen isolates were sensitive to SDHI (succinate dehydrogenase inhibitors) fungicide boscalid and fluxapyroxad, (mean EC₅₀=0.49 and 0.19?µg mL^?1, respectively), while the rest of isolates were highly resistant.     

活性艳橙K-7R分子印迹聚合物微球的制备及结合特性研究

以微米级聚苯乙烯微球为种球,活性艳橙K-7R为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀聚合法在水相中制得了分子印迹聚合物微球(MIPs),并用平衡吸附实验研究了其吸附性能。通过Scatchard分析,结果表明,MIPs在识别K-7R过程中存在两类结合位点,高亲和力结合位点的平衡离解常数Kd1=14.855μmol/L,最大结合量Qmax1=1.282μmol/g;低亲和力结合位点的平衡离解常数Kd2=70.939μmol/L,最大结合量Qmax2=3.930μmol/g。该MIPs对K-7R有较高的亲和性和选择性。     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。