Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]     

我国城市降雨径流污染控制模式探讨

随着城市的发展与点源污染控制的不断完善,城市降雨径流污染日益突出,对城市水体构成严重威胁,必须得到有效的控制。对国内外城市降雨径流污染控制模式进行了比较,并结合我国的实际情况,首次提出了双重控制模式,以期为我国城市降雨径流污染的控制与决策提供参考和借鉴。     

电晕法处理易挥发性有机物(VOCs)的实验研究

叙述了电晕法处理易挥发性有机物（ＶＯＣｓ）的实验研究。从实验中得出ＶＯＣｓ去除率与电场强度和空管速度的关系。对比了有填料与无填料时线 管式反应器处理ＶＯＣｓ的效果     

论区域环境规划的综合集成方法

区域环境是复杂的巨系统 ,在区域环境规划中必须采用综合集成的方法才能有效地解决各种问题。集成是一种有机的结合 ,提出了各环境规划要素集成的六种思路 ,并为六种集成的再度集成 ,提出了区域环境规划的综合集成环境规划室体系。     

水蚀风蚀交错带小流域生态环境综合治理模式研究

水蚀风蚀交错带是黄土高原侵蚀最严重的地区和黄河下游河床粗泥沙的主要来源区，其生态环境脆弱、治理难度大，加之晋陕蒙能源基地的大规模开发，也带来了新的环境问题。鉴于治黄和煤田开发及生态环境整治的紧迫需要，以水蚀风蚀交错带六道沟小流域为试区，分析研究了该区水蚀风蚀时空分布规律及脆弱生态环境特征，提出以防治水蚀和风蚀为中心，以提高生态经济效益和持续发展为目标，以基本农田优化结构和高效利用及植被建设为重点，建立具有防蚀固沙兼高效生态经济功能的大农业复合生态系统综合治理模式，取得了良好的社会与经济效益。     

大顶子山航电枢纽工程建库后上游水质总量控制研究

松花江大顶子山枢纽工程建设后,库区内水体流线及扩散规律的变化将影响库区内水质,受沿江排污影响,其规划目标的水环境容量将发生改变,因此对建库后上游水质总量控制进行研究很有意义.     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.     

人工曝气技术在河道污染治理中的应用

综述了国内外河道人工曝气技术的工程实践，介绍该技术的原理。在河流水质变化的不同时期应用河道曝气技术，可以分别达到消除黑臭，减少水体污染负荷，促进河流生态系统的恢复等目的，是种低成本、见效快的技术，具有较好的应用前景。