长短桩复合地基承载力发挥系数取值研究

根据水泥土长短桩复合地基试验结果,得到了考虑荷载水平的水泥土长短桩复合地基承载力计算公式。然后,考虑复合地基中桩体、桩间土和复合地基沉降量之间的相互关系,利用现场载荷试验成果,对单桩复合地基和长短桩复合地基的桩间土承载力发挥系数和合理的s/b取值范围进行了对比研究,得到了长短桩复合地基桩间土承载力发挥系数的计算方法。结果表明:长短桩复合地基桩体先于桩间土出现破坏,桩体极限荷载点对应的复合地基s/b值为s/b的上限;当垫层模量Ec为100M Pa时,长短桩复合地基s/b上限为0.0034,对应的桩间土承载力发挥系数为0.29。     

复合材料静态处理煤矿高浓度含锰废水的研究

针对目前云南省某煤矿排放废水中Mn~(2+)超标的问题,利用一种新型复合材料进行除锰试验.该复合材料是纳米分子筛与硅藻土经合理复配后,掺入复配絮凝荆形成的.试验中优化了不同材料的复合方式、絮凝剂的复配比例与用量.利用复配的多孔材料,对云南某煤矿含有大量悬浮物、Mn~(2+)质量浓度为5.32 mg/L的黑色废水及Mn~(2+)质量浓度为42.mg/L的红褐色废水进行了Mn~(2+)去除效果研究.结果表明,黑色废水中Mn~(2+)去除率达到70%,出水pH值为7.9;红褐色废水中Mn~(2+)去除率达到91.0%,出水pH值为7.1.与此同时,还研究了废水中Fe~(3+)、固体悬浮物(SS)对Mn~(2+)去除效果的影响,废水中Fe~(3+)的存在使pH降低,并与Mn~(2+)产生竞争吸附,对复合材料除锰有不利影响,而SS的存在对Mn~(2+)的去除效果没有显著的影响.     

刚性桩复合地基的理论、实测与安全性研究

科学合理的设计理论是工程安全性和经济性的保障,现场监测是确保工程安全和质量最有效的手段。本文以提高刚性桩复合地基工程的安全性为目的,围绕关乎建筑物安全的“沉降量”等参数指标,从设计理论与试验监测两个方面开展研究。本文完善了刚性桩复合地基的设计理论,通过现场监测试验取得了第一手的数据资料,可作为今后类似工程的设计和施工参考。本研究为进一步提高刚性桩复合地基的安全性提供了理论和实践保障。     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

Adsorption thermodynamics and kinetic investigation of aromatic amphoteric compounds onto different polymeric adsorbents

The adsorption behavior of p-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature.Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm.The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest,which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid.The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid.Thermodynamic studies suggested the exothermic,spontaneous physical adsorption process.Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂对Cd2+吸附性能研究

制备了一种聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂,重点考察了吸附剂对Cd2+吸附的pH依赖性、吸附动力学和吸附等温线.结果表明,Cd2+溶液pH值对吸附容量有较大影响.在pH=8、吸附时间30 min、Cd2+溶液初始浓度0.02 mol/L和吸附剂用量0.10 g的条件下,吸附剂对Cd2+的饱和吸附量可达294.7 mg/g.与膨润土相比,三维网络凝胶吸附剂具有更高的吸附容量和更快的吸附速率.     

超细粉煤灰基成型吸附剂的动态吸附实验

以粉煤灰为原料制备成型吸附剂,对水溶液中亚甲基蓝和Cr⁶⁺进行动态吸附研究,绘制穿透曲线,利用Origin软件对实验数据分析处理,得出穿透曲线的通式C_t=A₁－A₂〖〗1+(t/t₀)^p+A₁。结果表明,初始浓度C₀=25 mg/L,填料高度不同时,达到穿透点的时间随填料高度的增加而增加;填料高度h=200 mm,初始浓度不同时,达到穿透点的时间随初始浓度的增加而减小;该吸附剂对有机染料和重金属离子均有较好的吸附性能;穿透曲线通式的回归线性相关系数表明,该通式可很好地反映超细粉煤灰成型吸附剂的动态吸附过程。     

稀土在废水处理中的应用进展

综述了国内稀土金属在废水处理中的最新应用进展,总结了稀土复合吸附剂的制备方法及其在含磷、氨氮、砷、氟、铬、镉等废水处理中的效果,讨论了稀土复合混凝剂和稀土催化剂在染料、助剂、化工等高浓度有机废水处理中的应用,为找到高效环保的处理工业废水的方法提供了依据.     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。