顺丁烯二酸酐生产的环境友好技术

以正丁烷选择性氧化制顺丁烯二酸酐为例，按照氧化还原进行的烃类选择性氧化反应，采用将催化循环的不同步骤在空间或时间上分离的操作方法，可大幅度地提高反应的选择性，实现环境友好生产。重点介绍了循环流化床、人为非定固定床和膜反应器这3种新反应技术在顺丁烯二酸酐生产中的应用。     

微生物法处理电镀废水技术概况与展望

微生物法处理电镀废水技术倍受关注，文章在介绍国内外微生物法处理电镀废水的试验研究和大规模工业生产的基础上，总结了微生物法处理电镀废水的机理、工艺流程，优点及存在问题，并指出了这一技术的研究热点和发展前景。     

塑料电除雾器的特性与安全运行对策

介绍了塑料电除雾器性能与构造特点 ,分析了硫酸雾的成因及规律 ,针对塑料电除雾器运行中可能出现的故障提出了保证其高效运行的措施     

碳纳米管界面改性超滤膜的抗污机理解析

以碳纳米管(CNT)为核心改性材料,采用喷涂法对聚醚砜(PES)超滤膜进行界面改性,研究改性膜的抗污染性能.结果表明:改性膜经聚乙烯醇交联稳定后,呈现微弱的通透性降低和明显的亲水性提升,CNT交织网状层提高了界面粗糙度;在牛血清白蛋白(BSA)污染试验中,CNT-10改性膜的抗污性能最好,在20mg/L BSA试验后,...     

Sterilization of Escherichia coli cells by the application of pulsed magnetic field

The inactivation of microorganisms by pulsed magnetic field was studied. It was improved that the application of electromagnetic pulses evidently causes a lethal effect on E. coil cells suspended in phosphate buffer solution Na2HPO4/NaH2 PO4 (0.334/0.867mmol/L). Experimental results indicated that the survivability( N/N0 ; where N0 and N are the number of cells survived per milliliter before and after electromagnetic pulses application, respectively) of E. coil decreased with magnetic field intensity B and treatment time t. It was also found that the medium temperatures, the frequencies of pulse f, and the initial bacterial cell concentrations have determinate influences in destruction of E. coil cells by the application of magnetic pulses. The application of an magnetic intensity B = 160 mT at pulses frequency f= 62 kHz and treatment time t = 16 h result in a considerable destruction levels of E. coil cells ( N/N0=10^-4). Possible mechanisms involved in sterilization of the magnetic field treatment were discussed. In order to shorten the treatment time, many groups of parallel inductive coil were used. The practicability test showed that the treatment time was shortened to 4 h with the application of three groups of parallel coil when the survivability of E. coli cells was less than 0.01%; and the power consumption was about 0.2 kWh/m^3 .     

Straw bio-degradation by acidogenic bacteria and composite fungi

A composite microbial system, including a strain of Candida tropicalis (W3), a strain of Lactobacillus plantarm(WY3) and three strains of basidiomycete pL104, pL113 and C33, was chosen to degrade com straw.The final pH was acid owing to the inoculation of acidogenic bacteria, and under this condition the composite fungi system could produce complex enzyme to destroy the compact structure of corn straw. The experimental results showed that the biomass of composite fungi could reach up to maximum when the pH value was 4.5. Through the bio-degradation by combining acidogenic bacteria with the composite fungi system, the cellulose, hemi-ceUulose and lignin degradation rates of corn straw powder were 26.36%, 43.30% and 26.96%, respectively. And the gross crude protein content increased 60.41%. This study provided the evidence for the feasibility of developing a composite microbial system with high capability of degrading straw lignocelluloses in order to make reasonable use of straw resource and protect rural eco-environment.     

纳米零价铁改性膜强化厌氧生物处理氯酚废水

针对厌氧生物技术处理氯酚废水驯化周期长和纳米零价铁易团聚的问题,采用压滤法制备纳米零价铁改性聚偏氟乙烯膜（nZVI@PVDF）,并将其与厌氧生物体系耦合处理氯酚废水,通过序批实验探究nZVI@PVDF对耦合体系脱氯、水解酸化、产甲烷阶段的影响.结果表明,48h内,包含3种不同nZVI负载量（0.075,0.15,0.3g）的nZVI@PVDF膜耦合体系的2-氯酚（2-CP）去除率分别为99%、97.6%和91.8%,而未添加nZVI@PVDF的对照组仅为62.7%;72h内耦合体系的COD去除率分别为88.2%、89.1%、89.4%,而对照组COD去除率为63.6%;耦合体系的顶空甲烷占比分别为25.16%、25.98%、26.80%,而对照组仅为16.82%.投加产甲烷抑制剂的条件下,nZVI@PVDF刺激了脂肪酸的生成.nZVI@PVDF促进了氯酚的脱氯、脂肪酸和甲烷的生成.     

操作条件对TMBR性能的影响

为了探讨TMBR处理高浓度废水时操作条件对其性能的影响,用内径为8 mm聚偏氟乙烯(PVDF)管式超滤膜制作外置式管式膜生物反应器(TMBR)处理垃圾渗滤液。实验结果表明,增加跨膜压差(TMP)可以增加膜通量,当TMP超过适宜值后表现为通量与TMP无关的特性。提高膜面流速可以削弱污染层的形成,当超过适宜流速后也表现出通量与流速无关的特性。不同的污泥浓度(MLSS)存在适宜的TMP和适宜膜面流速。快速冲洗和化学清洗可分别使膜的通量恢复至新膜的78%和89%。     

煤气化细渣制备碳硅复合材料吸附去除水中Pb2+

以煤气化细渣为原料制备了高比表面积碳硅复合材料,并利用过硫酸铵对其进行表面改性,用于吸附100.0 mg/L PbCl₂溶液中Pb²⁺。表征结果显示：碳硅复合材料的比表面积为1 347 m²/g,改性后降为474 m²/g;改性后材料表面的羟基、羰基和羧基等含氧基团的含量显著增加。实验结果表明：溶液pH为5时,改性碳硅复合材料对Pb²⁺的平衡吸附量为124 mg/g,Pb²⁺去除率可达98.2%;吸附过程符合准二级动力学模型,以化学吸附为主,伴有物理吸附;吸附过程分为外扩散和内扩散两个阶段,受内扩散控制。     

活性炭复合材料负载催化剂催化臭氧氧化处理石化废水

采用催化臭氧氧化深度处理某石化厂炼油废水,制备了活性炭复合材料负载催化剂(Fe_2O_3/ACNT),与几种常见负载催化剂进行了物性和COD去除效果的对比,并对Fe_2O_3/ACNT的催化效果和稳定性进行了详细分析。结果表明:催化剂的催化臭氧氧化活性由高到低的顺序为Fe_2O_3/ACNTFe_2O_3/活性炭Fe_2O_3/Al2O3Fe_2O_3/陶粒;Fe_2O_3/ACNT催化剂具有较高的比表面积、孔体积、强度和吸水率,使COD去除率由单独臭氧氧化时的约20%提高到66.8%。在催化剂填充量200 m L、废水pH 7.6、臭氧投加量200 mg/L、体积空速1 h~(-1)的条件下运行30d,COD去除率平均达65.1%,出水COD均值为40.8 mg/L,最高值为44.3 mg/L,满足外排水COD小于50 mg/L的指标。催化剂稳定性良好,运行30 d活性未见明显降低,具有在环保领域应用的前景。