等离子体联合技术处理挥发性有机化合物废气的研究进展

挥发性有机化合物（VOCs）废气污染面广、气量大、浓度低,含VOCs废气的排放将会受到越来越严格的控制,需要不断研究开发新的VOCs废气处理技术。等离子体联合技术具有多功能作用的效果,对污染物的降解率、能量利用率及对污染物的选择性均高于单一的等离子体技术。综述了等离子体与吸附剂、催化剂、铁电性物质联合处理VOCs废气技术的研究进展,展望了该技术的发展方向。     

活性炭吸附回收挥发性有机物的研究进展

活性炭吸附法是目前使用范围最为广范、技术最为成熟的回收挥发性有机物（VOCs）的方法。该法与冷凝法联用,可达到经济、高效回收VOCs的目的。介绍了变压吸附和变温吸附等常见的活性炭吸附回收VOCs的工艺,分析比较了各工艺的特点,并指出了存在的问题。在总结现有研究进展的基础上,预测了活性炭吸附回收VOCs技术的发展趋势。     

SPME-GC-MS联用快速检测赤潮海水中的有机物

本文用固相微萃取（ＳＰＭＥ）样品预处理技术,分离富集海水中的有机物,结合气相色谱－质谱（ＧＣ－ＭＳ）联用技术进行海水中有机物的快速检测,研究了赤潮发生时海水中有机物的种类及含量的变化规律,初步探讨了其变化原因,为研究赤潮的发生机理和赤潮预报提供了科学依据。     

糖蜜酒精废水两相UASB处理有机物去除特征

应用气相色谱研究了糖蜜酒精废水两相ＵＡＳＢ处理工艺段中有机物的去除情况,结果表明,酸化反应器内,易降解有机物的去除率上为１００％,产甲烷段反应器内,因易降解化合物在酸化反应器内大部分被去除,剩下的化合物的在该段反应器内去除率偏小,仅为８０％。质谱结果证实,进水中的酚类化合物经两级处理后,被有效去除。     

生物酶催化技术在水污染应急处置中的应用

针对城市生活污水处理厂滞留污水中的高浓度难降解污染物质,提出采用生物酶催化技术对滞留污水进行应急处置,可在最短的时间内有效去除污染物,无二次污染,为环境污染应急处置提供了有效措施。     

Phanerochaete chrysosporium吸附载体的选择及染料降解研究

研究了游离细胞与载体吸附培养、不同载体材料对Phanerochaete chrysosporium进行连续染料脱色及产酶能力的影响。结果表明,P.chrysosporium可在载体上良好生长,甚至生长到载体内部。木屑、玉米芯、花生壳3种载体材料中,以木屑载体吸附培养物的持续脱色和产酶效果最佳,该培养物经三轮连续脱色后对染料RB5仍能达到最高95%的脱色率,并产生596 U/L锰依赖过氧化物酶（MnP）和1 326 U/L木质素过氧化物酶（LiP）,对染料的持续脱色和产酶能力明显优于游离细胞培养物。     

曝气＋化学絮凝法预处理环氧丙烷废水

根据环氧丙烷废水的特点,应用电化学法处理具有较高的可行性。运用电化学法处理PO废水前必须进行废水预处理,用以提高电流效率和延长极板寿命。采用曝气和化学絮凝结合的方法去除PO废水中的Ca2＋,同时去除部分COD。对曝气、无机絮凝剂（PACl、PFS）和有机絮凝剂（PAM）对PO废水处理过程中的曝气量、曝气时间、投药量、复配和沉降时间等主要影响因子进行了实验研究,通过比较Ca2＋、COD的去除效果、絮凝剂用量、沉降时间、处理成本等方面,在设定的实验参数下得到最佳预处理方案为：曝气量为2．5L／min,曝气45min,投加Na2CO3粉末24kg／t废水,充分混匀后加入PFS＋PAM复配絮凝剂。本方案具有废水处理效果好（Ca2＋的去除率为77．03％,COD的去除率为37．46％）、投药量少（（100＋7．5）g／t废水）、沉降时间短（5min）、处理成本低（0．675元／t废水）等优点。通过对比经预处理和不经预处理后电化学法对COD去除效果、电流和处理后阴极表面,验证了预处理方案的必要性与可行性。     

Compound-specific chlorine isotope analysis of polychlorinated biphenyls isolated from Aroclor and Clophen technical mixtures

The combined electrochemical oxidation-solar-light/immobilized TiO₂ film process was conducted to degrade an azo dye, Reactive Black 5 (RB5). The toxicity was also monitored by the Vibrio fischeri light inhibition test. The electrochemical oxidation rapidly decolorized RB5 (55, 110 μM) with a supporting electrolyte of 2 g l⁻¹ NaCl at current density 277 A m⁻² and pH 4. However, TOC mineralization and A₃₁₀ removal were low. Additionally, the treated solution showed high biotoxicity. RB5 at 110 μM significantly retarded the de-colorization efficiency by using the solar-light/immobilized TiO₂ film process. The combined electrochemical oxidation-solar-light/immobilized TiO₂ process effectively increased the removal of color, A₃₁₀, and TOC. The toxicity was also significantly reduced after 3 h of solar irradiation. The results indicated that the low-cost combined process is a potential technique for rapid treatment of RB5.     

Activated carbons derived from oil palm empty-fruit bunches： Application to environmental problems

Activated carbons derived from oil palm empty fruit bunches （EFB） were investigated to find the suitability of its application for removal of phenol in aqueous solution through adsorption process, Two types of activation namely; thermal activation at 300, 500 and 800℃and physical activation at 150℃ （boiling treatment） were used for the production of the activated carbons. A control （untreated EFB） was used to compare the adsorption capacity of the activated carbons produced from these processes. The results indicated that the activated carbon derived at the temperature of 800℃ showed maximum absorption capacity in the aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon at 800℃. It was observed that the adsorption capacity was higher at lower values of pH （2-3） and higher value of initial concentration of phenol （200-300 mg/L）. The equilibrium data fitted better with the Freundlich adsorption isotherm compared to the Langmuir. Kinetic studies of phenol adsorption onto activated carbons were also studied to evaluate the adsorption rate. The estimated cost for production of activated carbon from EFB was shown in lower price （USD 0.50/kg of activated carbon） compared the activated carbon from other sources and processes.     

Isolation and preliminary characterization of a 3-chlorobenzoate degrading bacteria

A study was conducted to compare the diversity of 2-, 3-, and 4-chlorobenzoate degraders in two pristine soils and one contaminated sewage sludge. These samples contained strikingly different populations of mono-chlorobenzoate degraders. Although fewer cultures were isolated in the uncontaminated soils than contaminated one, the ability of microbial populations to mineralize chlorobenzoate was widespread. The 3- and 4-chlorobenzoate degraders were more diverse than the 2-chlorobenzoate degraders. One of the strains isolated from the sewage sludge was obtained. Based on its phenotype, chemotaxonomic properties and 16S rRNA gene, the organism S-7 was classified as Rhodococcus erythropolis. The strain can grow at temperature from 4 to 37℃. It can utilize several （halo）aromatic compounds. Moreover, strain S-7 can grow and use 3-chlorobenzoate as sole carbon source in a temperatures range of 10-30℃ with stoichiometric release of chloride ions. The psychrotolerant ability was significant for bioremediation in low temperature regions. Catechol and chlorocatechol 1,2-dioxygenase activities were present in cell free extracts of the strain, but no （chloro）catechol 2,3- dioxygenase activities was detected. Spectral conversion assays with extracts from R. erythropolis S-7 showed accumulation of a compound with a similar UV spectrum as chloro-cis,cis-muconate from 3-chlorobenzoate. On the basis of these results, we proposed that S-7 degraded 3-chlorobenzoate through the modified ortho-cleave pathway.