桉树叶提取液还原石墨烯电极提高微生物燃料电池产电性能的研究

将桉树叶提取液绿色还原氧化石墨烯(G-rGO)电极和微生物还原氧化石墨烯(B-rGO)电极依次作为微生物燃料电池(MFC)阳极,采用红外光谱(FTIR)、X射线衍射(XRD)、扫描电镜(SEM)对所制备的电极进行表征,并采用循环伏安法(CV)、交流阻抗法(EIS)对比2种电极的电化学性能.结果发现,G-rGO阳极的内阻为243.87Ω,应用于MFC时最大功率密度和最大输出电压分别为18.77 W·m~(-3)和760 mV,对照组B-rGO电极的内阻为299.11Ω,将其应用于MFC时最大功率密度和最大输出电压分别为13.16 W·m~(-3)和635 mV,对照组未修饰阳极的内阻为375.21Ω,最大功率密度和最大输出电压分别为8.97 W·m~(-3)和480 mV.研究表明,G-rGO电极电阻更小,导电性能更优越.     

微生物燃料电池恒电流预培养阳极生物膜分析表征

阳极性能是影响微生物燃料电池(Microbial Fuel Cells,MFCs)性能的关键因素之一,同时阳极的接种挂膜过程是影响微生物燃料电池启动效率的关键因素.因此,本课题组提出了预培养阳极作为微生物燃料电池的一种新型阳极的概念,在三电极体系下,通过外加恒定电流预培养阳极,在不同条件下对阳极表面进行电化学选择和生物膜驯化以丰富生物膜结构和厚度.结果表明,阳极的性能与预培养电流大小密切相关,预培养阳极CF-4i(外加4 A·m-2电流密度)通过循环伏安法、塔菲尔曲线、电化学阻抗谱测试,性能好于其他测试组及对照组,装配阳极CF-4i的微生物燃料电池能实现最大功率密度968.20 m W·m-2,是对照组的2.53倍.同时,通过共聚焦显微镜观察发现,生物膜大体分两层,外层的活细胞及内层的死细胞,外层活细胞长在内层死细胞之上.这种结构分布表明,阳极生物膜中的活细胞部分绝大多数都分布于生物膜的外侧,而不是均布于整个阳极生物膜中;同时这也表明不是整个阳极生物膜都具有新陈代谢活性,但死亡的细胞可以继续积累在电极表面附近,活的外层膜负责电流的产生,而内层的死细胞作为一种导电基质.     

秸秆压块与燃煤供热系统生命周期环境排放对比研究

为证明采用秸秆压块燃料替代煤炭进行供热的可持续性,对秸秆压块和燃煤供热系统的生命周期环境排放进行了对比分析.基于我国2012年投入产出表,构建了投入产出生命周期评价(IO-LCA)和过程生命周期评价(PLCA)相结合的混合生命周期评价(Hybrid-LCA)模型,核算了玉米秸秆压块和燃煤供热系统供应1 GJ热的生命周期CO2、SO2、NOx和PM2.5排放.结果显示,秸秆压块供热系统的生命周期CO2排放量为7 kg·GJ-1热,比燃煤供热排放减少121 kg.此外,秸秆压块供热系统比燃煤供热系统可以分别减少SO2排放98%、NOx排放76%和PM2.5排放58%.控制原料水分,通过减少原料收集和能源转化过程中的耗损,减少能源转化过程的电力消耗以及控制原料收集半径等可以有效改进秸秆压块供热系统环境表现.     

燃料乙醇应用对环境的影响

燃料乙醇作为可再生的替代能源被越来越广泛地利用.从对空气的影响、对土壤和地下水的潜在影响、能源的有效性和能源的可持续性4个方面阐述了燃料乙醇使用对环境的影响效应,既说明了其显著的优势,又提出了存在的问题及相关建议,旨在更充分地发挥燃料乙醇的能源价值.     

硫酸盐还原菌包覆矿石控制酸性废水排放及碳源的优选研究

本研究基于实验室筛选、培养的硫酸盐还原菌(Sulfate-reducing bacteria,简称SRB)菌群,分别考察以麦芽糊精、污泥、乙醇、乳酸钠等为碳源时SRB的生长状况,同时模拟野外环境进行柱淋滤实验,分析在不同碳源作用下原位控制酸性矿山废水的效果.结果表明,采用这4种碳源时,SRB还原硫酸盐能力的大小依次为:...     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

基于复合治理理论的基层应急管理模式优化*

为弥补传统基层应急管理模式的短板,解决信息壁垒、协调困难、公众参与不足等问题。从复合性视角出发,阐述复合治理理论内涵,探讨复合治理与应急管理在主体、思维、过程、空间、目标上的契合性,并进一步分析基层应急管理的现实背景和困境,进而构建基于复合治理理论的基层应急管理模式,阐明模式基本结构和工作流程,最终提出理念树立、平台搭建、机制保障、队伍建设、制度安排、文化营造、技术支撑方面的优化路径。结果表明:复合治理理论的应用可以加强基层应急管理能力,促进多元主体协同共治。     

Characteristics of stable biodiesel emulsion fuel with the aid of lipophilic surfactant,polyglycerol polyricinoleate (PGPR)

ABSTRACT

Biodiesel emulsion fuel is reported as one of the most feasible options capable of generating lower NOx emission than that from fossil fuels. However, oil and water in the emulsion fuel are easily separated and unstable. The aim of the present study is to consider the production and stability of biodiesel emulsion fuel by using tetraglycerin ester (CR-310), i.e., one of lipophilic surfactant, polyglycerol polyricinoleate (PGPR) and biodiesel, i.e., Waste cooking Oil Methyl Ester (WOME) produced based on waste cooking oil. The corresponding heat rate, water content, and viscosity are measured. Emphasis is placed on the effects of water content and surfactant on biodiesel emulsions. It is found that: (i) stable emulsion fuel is obtained by adding at least 2.0% of CR-310 and is maintained over 1 month, (ii) there is no effect of water content on stable emulsion fuel if CR-310 is used over 2.0%, and (iii) the viscosity of emulsion fuels is higher than that of the biodiesel fuel and is gradually increased with an increase in the water content.     

Fine-resolution mapping of wildfire fuel types for Canada: Fuzzy logic modeling for an Alberta pilot area

The Canadian Forest Fire Danger Rating System (CFFDRS) is used daily across Canada for evaluating forest fire danger. Fuel-type information is one of the inputs required by the models used in the CFFDRS. In this project, three fuel-type maps with a 25 m resolution were produced for a pilot study area located in Alberta using land cover only; land cover and biomass; and, land cover, biomass and leaf area index data derived from satellite imagery. The relationships between inputs and fuel types were determined mainly by the opinions of forest fire scientists and incorporated into a computer program using fuzzy set methodology. Not all the CFFDRS fuel types could be distinguished using these inputs; three of the coniferous types had to be grouped into one common fuel type. Overall accuracy was between 74 and 83% based on ground-truth comparisons. The most accurate map resulted from land cover and biomass data. Detailed accuracy assessment indicated that the overall accuracy increased up to 86% if ambiguous fuel type identification was considered. No combination of inputs was able to define a fuel type with absolute certainty, which is a reflection of differing expert opinions and the small number of inputs used to produce the maps.     

防渗材料在日本垃圾填埋场的应用

介绍了日本垃圾填埋场防渗系统的构造和防渗材料的分类,以及近年日本各种防渗材料的使用情况。同时作者也结合中国的实际情况提出了适合我国国情的垃圾填埋场防渗系统构造。