MODELING MULTIPLE-USE IN NATURAL AREAS: PART 1 - THE BASIC FORMULATION1

ABSTRACT: This paper presents a mathematical model of multiple-use in natural areas. The model represents a unified system for the assessment of cases where some form of development is proposed for relatively natural areas. The focus of the model system is a benefit-cost analysis. Provisions for the full consideration of easily measured monetary costs and benefits as well as semitangible benefits accruing from environment-related activities such as outdoor recreation are contained in the model. Means for incorporating desirability as a measure of aesthetics, uniqueness, and environmental quality into the evaluation are provided. Serveral types of constraints have been imposed on the system to increase model realism. A family of compatibility constraints was designed to limit inter-use conflicts arising from incompatible activities. A form of the gradient optimization algorithm was utilized to facilitate the evaluation. The model system has application in a wide range of problems frequently encountered in environmental planning and assessment as well as natural resources management.     

ASSESSMENT ANALYSIS FOR WATER SUPPLY ALTERNATIVES1

ABSTRACT Providing adequate water supplies of good quality is becoming a serious problem in many areas of the United States. Some of the alternatives proposed for meeting the growing shortage of clean-water or cheap-water are reallocation, reuse, and importation. This paper outlines a methodology to assess all of these water supply alternatives by examining the amount and time-staging for development of water sources. In conceptualizing the problem, sources of supply are classified in three categories: primary or base supplies, secondary or effluent supplies, and supplementary or imported supplies. A model of the water system is formulated as a “transportation problem” in linear programming depicting the possible sources of supply which can be used to satisfy the requirements of various water users. The optimizing objective in the model is to minimize the cost of water under various assumptions for operating the system. A case study of the Salt Lake Qty, Utah, area is used to illustrate the application of the model in obtaining optimal water supply allocations for projected future demands. Assessment of alternatives in the study include redistribution of supplies, time-staging of supplies and related treatment facilities, and sensitivity of allocations to changes in costs.     

基于居民行为的三生空间识别与优化分析框架

“三生空间”是人类经济、社会活动的基本载体,也是人类精神和文化需求的空间反映。识别“三生空间”范围、了解居民“三生”需求、调整“三生空间”供给、统筹“三生空间”功能是国土空间规划内容的核心,也是当前实现治理能力现代化和新时代高质量发展的重要前提。从当前国土空间规划编制的需求出发,依据行为科学和行为地理学等理论方法,探讨了“三生行为”与“三生空间”的理论关联,进而遵循“需求分析与空间识别—问题诊断与目标确定—作用机理与耦合关系—空间优化与政策建议”分析思路,构建基于居民行为的“三生空间”优化分析框架。将居民行为研究与空间供需结合起来,可为国土空间规划工作提供“人本化”的理论框架与新思路。     

基于烦恼改善程度优选噪声控制方案

影响噪声烦恼的声学参量较多,然而在传统噪声控制工程中,往往仅根据A计权声压级所需降低量进行控制方案设计,未能从烦恼改善程度优选方案.为此,本研究提出一种基于烦恼改善程度优选噪声控制方案的方法,并将该方法应用于变电站声屏障噪声控制方案的比选.结果表明,同一声屏障方案对不同关心点噪声烦恼的改善程度差异较大,A计权声压级降低量最大的声屏障方案对噪声烦恼的改善效果未必最好.因此,噪声控制工程设计中,宜根据所关心的声环境保护目标与噪声源的相对位置,选取对保护目标处噪声烦恼改善程度较大的方案.     

基于理想点法的加筋板屈曲承载力优化

目的针对加筋板在使用工况中易发生屈曲和结构失稳,提出一种基于理想点法的屈曲承载力优化设计方法。方法以加筋板的屈曲承载力最大和结构质量最小为目标,以加筋板的屈曲、最大vonMises应力和筋条压损等为约束条件,并利用理想点法将多目标优化问题转化为单目标优化问题。基于ANSYS参数化建模技术,构建屈曲分析、优化设计一体化分析与设计模型,并采用单目标优化算法——DOWNHILL SIMPLEX算法实施了优化分析。结果优化后结构质量从0.195 kg增加到0.24 kg,增加了23%,结构承载力从129.4 k N提升到235.84 kN,提高了82%。结论通过优化能够获得结构性能折中的方案,可为加筋板结构设计应用提供参考。     

核级管道非标支架的力学分析与优化设计

目的基于核级管道支架的力学分析,针对性地提出非标支架优化设计方案。方法核电站中管道支架为确保管道系统的安全运行发挥着至关重要的作用。针对工况复杂、要求严苛、承载恶劣的管道支架,为满足其支撑与抗震功能,通常采用非标设计。深入研究非标支架的力学计算和评定方法。通过有限元计算评定结果,发现支架设计中不满足规范要求项,提出非标支架优化设计方案。结果首先针对支架整体结构刚度和稳定性不足,采取增加斜支撑与增强约束等结构性修改措施,进而确定增强支撑钢梁强度的优化方案,解决应力超过规范许用限值问题,最后对于问题集中的管道连接区域,提出局部支撑构件重新设计方案。结论该优化方案可为核级管道非标支架设计提供借鉴和指导,以满足核电标准规范和设计要求。     

Revealing the effect of preparation parameters on zeolite adsorption performance for low and medium concentrations of ammonium

The effect of preparation parameters on the performance of zeolite for ammonium(20–300 mg N/L) adsorption from simulated wastewater is reported. It was found that the ratios of Na_2O/SiO_2 and Si/Al had a more important influence than crystallization time on zeolite adsorption properties. Relatively low Na_2O/SiO_2 ratios were beneficial for fabrication of zeolites with high proportions of micropore area and volume, which led to the surface adsorption mechanism being dominated by surface free energy and pore effects. However,with decreasing Si/Al ratios, the effect of ion-exchange was more prominent due to the high negative surface potential of zeolite. In addition, the concentration of weak acid sites on the zeolites was increased with lower ratios of Na_2O/SiO_2 and Si/Al, which may promote ammonium removal. Therefore, the most effective zeolite for ammonium removal, which was fabricated at Na_2O/SiO_2= 1.375, Si/Al = 4 and crystallization time of 48 hr, exhibited the cooperative effects of adsorption, ion-exchange and a large amount of weak acid sites. The maximum ammonium adsorption capacity(35.06 ± 0.98 mg/g) and the removal efficiency(94.44% ± 4.00%) were obtained at the dosage of 4.0 g/L zeolite NaX at ammonium concentrations of 300 mg N/L and 20 mg N/L, respectively. The Freundlich isotherm and pseudo-first-order kinetics models provided excellent fitting for the ammonium adsorption process. In addition, zeolite NaX showed about 1.23–3.2 times the ammonium adsorption capacity of clinoptilolite. The stable and efficient reusability of zeolite NaX after five regeneration cycles demonstrated that this adsorbent has considerable potential for practical industrial applications.     

通信指挥方舱取暖试验方法优化研究

目的 提高通指车辆低温环境试验效率、缩短试验周期和节约试验成本.方法 采取经验梳理、理论分析、试验验证和数据分析相结合方法,分别绘画出同一通指车辆方舱在?30、?40℃两个环境中相同时间内的升温曲线.结果 在相同的加热时间内,同一通指车辆方舱在?30、?40℃两个环境中的升温曲线基本吻合.结论 在对暖风机升温性能测试时,可以将GJB 219B—2005《军用通信车通用规范》中规定的方舱取暖测试用环境温度值由?30℃改为?40℃或其他方便测试的温度.     

炼化过程工艺报警管理研究

为了从根本上减少炼化过程工艺参数的滋扰报警数量,提出一种工艺报警管理方法,包含管理和技术两个层面。在管理层面,明确报警管理职责与分工,报警参数、报警优先级及报警值的设置原则,以及在报警处置、报警考核等方面的要求;在技术层面,以报警的评估与优化技术为手段,从工艺和仪表方面减少报警数量,提升报警性能。现场应用效果表明,提出的报警管理方法可大幅减少炼化过程的无效报警数量,从而降低装置运行风险。     

基于空气质量模式和数学规划模型的城市PM2.5达标策略——以临汾为例

为了改善城市空气质量,降低PM_2.5浓度,需要制定科学的控制策略,同时兼顾污染物减排量与减排成本效益.本文基于区域大气环境模型RegAEMS与数学规划模型,采用多目标遗传算法,探究城市大气PM_2.5污染的最优控制策略,并应用于临汾市（14类行业源、17个区域源）的PM_2.5浓度达标规划,实现污染物排放量最大和减排成本最小的双目标优化.结果表明,在PM_2.5平均浓度近200 μg/m³的重污染天气条件下,为达到PM_2.5浓度目标（75μg/m³）,临汾市最大污染物允许排放量为356.7t/d,最小减排成本为3.36亿元.NO_x、SO₂、NH₃、VOCs和一次颗粒物的减排量分别为98.1,49.9,44.3,155.7和105.5t/d,减排成本分别为11.7,6.8,6.2,5.5和3.5千万元.对VOCs、NO_x、PM_2.5、NH₃和SO₂减排潜力最大的行业分别为焦化源、移动源、扬尘源、农业源和民用燃烧源,分别占所有行业5种污染物减排量的21.6%、14.1%、11%、8.6%和3.8%.钢铁行业的减排成本最高（39%）;襄汾县的减排量最大,减排成本最高（达7218万元）.