厌氧膨胀颗粒污泥床处理高浓度链霉素含硫有机废水试验研究

介绍了采用厌氧膨胀颗粒污泥床 (EGSB)反应器 -生物接触氧化法日处理 2 0 0t高浓度链霉素含硫有机废水的生产性试验研究。试验结果表明 ,厌氧EGSB反应器在控制中温发酵 (35± 1℃ )条件下 ,以低浓度CODCr2 0 0 0— 70 0 0mg/L ,CODCr/SO2 -4=7— 10进水 ,可有效降低反应器中毒性物质的抑制作用 ;进水CODCr在 70 0 0— 130 0 0mg/L ,水力停留时间(HRT)为 3— 5h ,pH值为 6 8— 7 2条件下 ,EGSB的最大容积负荷 15 8kgCODCr/m3 ·d ,对CODCr去除率可达 75 % ,对SO2 -4去除率也可有效地控制在 6 0 %— 70 %。进一步通过好氧生化处理 ,CODCr总去除率可达 91 3%。     

纺织印染废水治理工程设计

采用混凝沉淀 -酸化水解 -生物接触氧化工艺处理纺织印染废水。工程实践运行表明 ,该工艺处理效果好、运行稳定、投资省     

UASB-接触氧化-气浮处理柠檬酸废水

介绍了UASB-接触氧化-气浮工艺处理柠檬酸废水的工程应用.工程运行表明,柠檬酸废水在进水SS、COD和BOD5分别为3427 mg/L、18 853 mg/L和11778 mg/L的条件下,经该工艺处理后,外排废水SS、COD和BOD5浓度分别为147.5 mg/L、223 mg/L和51.9 mg/L.该工艺具有占地面积小、工程投资和运行费用低及处理效果稳定等特点,能广泛应用于柠檬酸废水的处理.     

微/纳米颗粒表面能测定方法适用性研究

采用静态液滴法、柱毛细法、板毛细法3种方法,分别测定了水、正己烷、甲酰胺、二碘甲烷4种液体与TiO_2(40 nm)、TiO_2(100 nm)、Al_2O_3(200 nm)、高岭土(200~400nm)、Fe_2O_3(400~600 nm)、SiO_2(20μm)6种粒径微/纳米颗粒之间的接触角,确定了适用于不同颗粒粒径的接触角测定方法.在此基础之上,利用Young-Dupré方程计算了各微/纳米颗粒的表面能及各分项.结果表明:粒径较小的颗粒(如200 nm)接触角的测定适合使用静态液滴法,而粒径较大的颗粒(如600 nm)接触角的测定适合使用柱毛细法.粒径大小适中时(如200~600 nm),静态液滴法和柱毛细法都适用,测定结果差别普遍较小(≤11°),但二碘甲烷与Fe_2O_3(400~600 nm)之间的接触角利用不同方法测定结果相差可达14°.静态液滴法操作方便,但由于粗糙度的影响需要对接触角测定值进行修正.板毛细法测定接触角时,液体容易挥发,不易得到准确测量结果,不推荐使用.对全部6种测定的微/纳米颗粒,表面能的计算结果相差不大.表面能的3个分项中,范德华分量(γLW)与路易斯碱分量(γ-)的贡献最大,路易斯酸分量(γ+)的贡献很小,主要是因为在微/纳米颗粒-液体界面中,电子受体的反应活性较低.     

Toxicity of the venom in three neotropical Crematogaster ants (Formicidae: Myrmicinae)

Bioassays were performed to investigate and compare the toxic properties of the contact venoms of three Neotropical Crematogaster species (C. sp. prox. abstinens, C. distans and C. brevispinosa rochai), whose main venom compounds are chemically different (long chain derivatives linked to an aldehyde or a primary acetate, and furanocembrenoid diterpenes, respectively). Different quantities of venom were topically applied on the bodies of three target insect species (workers of the termite Nasutitermes ephratae, workers of the ant Solenopsis sp., “media” and “major” workers of the ant Cephalotes pusillus). The toxicity of the venom greatly varied according to the Crematogaster species, the venom of C. b. rochai showing the highest toxic activity towards all target species. The sensitivity of the target species also greatly varied, the workers of N. ephratae showing a great sensitivity to the venoms, while the heavily armoured workers of the ant C. pusillus, particularly “major” ones, were resistant. Cuticle thickness was found to be a key factor in the resistance to the toxic effects of Crematogaster venom. Sensitivity of the target workers was also directly related to the amount of venom applied to their cuticle. Workers of C. distans were resistant to topical application of their own venom, while C. sp. prox. abstinens and C. b. rochai were not. In all cases, the venoms were slow acting, as several hours to one or even several days were needed to obtain a significant mortality. The main biological activities of the Crematogaster venom could be related to more immediate repellent properties, as recently shown with the European species C. scutellaris.     

Maximum uptakes of cadmium on free and immobilised bacteria and actinomycetes cells

Studies of adsorption of cadmium by free bacterial and free actinomycete cells, alginate beads and immobilised bacterial or actinomycete cells in alginate beads were performed in ultrapure water. The immobilisation in alginate beads allows the survival of the microorganisms in non-ideal conditions. Here, we found the following affinity for the cadmium ion: R25 free cells<alginate beads<R25 immobilised cells<ZAN 044 immobilised cells<ZAN 044 free cells, obtained with the b Langmuir parameter. The maximum uptakes gave the series: ZAN 044 free cells<ZAN 044 immobilised cells<R25 free cells<alginate beads<R25 immobilised cells.     

高温原油降解菌处理油田采油废水的研究

研究了筛选的嗜热降解功能菌对高温、高盐环境的耐受性，同时采用接触氧化工艺，探索高温条件下嗜热生物系统对油田外排水的处理效果．结果表明，嗜热降解功能菌能够耐受高温（40～59℃）、高盐（30g/kg）和高pH（9.0）环境，实验室小试运行温度55～60℃，进水CODcr为270～510mg／L，出水CODcr为61．7～101．0mg／L．胜利油田王家岗污水站高温外排水生物处理中试，进水CODcr200～300mg/L，温度60～67℃，生化出水CODcr79．2～140．1mg/L．图4表3参10     

港口污水膜生物反应器回用处理技术研究

系统地论述了膜生物反应器的反应特征、去除机理，及其在港口污水中水回用处理应用的可行性。结果表明，膜生物接触氧化法用于港口污水处理，具有出水水质稳定、占地面积少、去除效率高等特点。经预处理后的港口污水再行由膜生物接触氧化反应器处理后可直接用作回用水。     

含制药残液废水的处理工艺研究

探讨了含制药残液废水的预曝-生物接触氧化-混凝沉降处理工艺。研究结果表明,经石灰乳调pH8.0曝气48h的废水,COD_(Cr)去除率可达47.5％;采用出水回流,进水COD_(Cr)1500～4000mg/L时,负荷为1.00～2.67kg/m~3·d,COD_(Cr)去除率超过86％;生化出水经投加PAC52.8mg/L,COD_(Cr)去除率为64.8％,达到国家工业废水排放标准。     

水源水生物处理工艺中亚硝酸盐氮的去除

通过中试规模试验系统 ,分析了不同运行条件下微污染水源水生物接触氧化处理工艺中亚硝酸盐氮的去除状况 ,探讨了亚硝酸盐氮积累量与氨氮去除率之间的关系。指出处理系统中硝酸盐细菌对亚硝酸盐细菌生化过程的依赖作用是亚硝酸盐氮积累的内因 ,而工艺参数等运行条件的变化是亚硝酸盐氮积累的外因 ,提高氨氮去除率是去除亚硝酸盐氮的关键。