Environmental life cycle assessment of different types of the municipal wastewater pipeline network

With the onset of social life, humans have considered waste disposal as essential, and they have been able to repel it through brick and clay channels. Checking sewage pipes for energy consumption and a longer lifetime than other sewage system components is important. Climate change and exploitation of industrial resources have made environmental impacts, which are important factors in decision making. The purpose of this study was to introduce the most suitable type of sewage pipe considering environmental protection. Therefore, we applied the environmental life cycle assessment (LCA) method, using Sima Pro 8.2.3 software for the one-kilometer length of concrete pipes (300 mm in diameter), Polyvinyl chloride (PVC), and polyethylene (PE) (315 mm in diameter). Also, the BEES method and sensitivity analysis were used to validate the results. The comparison between three types of municipal wastewater pipes indicated that PE pipes are a more environmentally friendly option than PVC, and concrete pipes in pipe recycling, reducing extraction from untapped resources, and inefficient extraction of resources. Electricity, diesel fuel, and sulfate resistance cement consumption for concrete production are the most pollution elements in the LCA of concrete pipes. Usage of PVC granular, sanitary landfill of PVC pipes, and using hydraulic drill in LCA of PVC pipes are the most elements of generating pollution. The usage of PE granules, PE pipes landfilling, hydraulic excavator, and electricity consumption in the LCA of the PE pipes are the greatest polluting parameters.     

Changes in electrical generator cooling systems: Are they cost-effective sources of water now and under climate change?

In the United States, thermal power plant electrical generators (EGs) are large water diverters and consumptive users who need water for cooling. Retrofitting existing cooling systems to dry cooling and building new facilities with dry cooling can save water and reduce EG's vulnerability to drought. However, this can be an expensive source of water. We estimate that the cost of water saved by retrofitting cooling in existing EGs ranges from $0.04/m³ to $18/m³ depending on facility characteristics. Also water savings from building new EGs with dry cooling ranges in cost per unit water from $1.29/m³ to $2.24/m³. We compare costs with that for water development projects identified in the Texas State Water Plan. We find the water cost from converting to dry cooling is lower than many of the water development possibilities. We then estimate the impact of climate change on the cost of water saved, finding climate change can increase EG water use by up to 9.3% and lower the costs of water saved. Generally, it appears that water planners might consider cooling alterations as a cost competitive water development alternative whose cost would be further decreased by climate change.     

天然气净化厂冷却塔风机驱动方式改造简论

文章介绍长庆油田第一天然气净化厂冷却塔风机驱动设备的改造情况。分析了长庆油田第一天然气净化厂冷却塔电机驱动方式存在的不足和原因,提出了改进对策和实施方案,论述了水轮机驱动方式改造工程在经济、节能降耗、环保、安全、高效等方面的优点,值得在油气田生产应用中推广。     

循环冷却水处理中臭氧的杀菌作用

臭氧作为强氧化剂可以用于循环冷却水的处理中.试验研究了影响臭氧杀菌的基本因素,冷却水的pH和水温对处理效果基本没有影响.臭氧的杀菌能力取决于水中的剩余臭氧浓度,臭氧的消耗量与系统中的微生物数量有关.当水中剩余臭氧浓度为0.05mg/L和接触时间为14min时,可以使臭氧的灭菌力达99%.即在循环冷却水系统中,投加0.05mg/L臭氧,就可以控制系统中微生物的生长.由此确定了循环水处理过程中为控制系统中微生物的生长所需维持的最低臭氧浓度.     

火灾后套筒灌浆料力学性能试验研究

为研究火灾对套筒灌浆料力学性能的影响,设计不同受火时间(60,90 min),不同静置时间(1,14 d)以及不同冷却方式(自然冷却、喷水冷却)试验,分析不同工况下的套筒灌浆料的抗折强度和抗压强度.结果表明:随着受火时间的增加,套筒灌浆料的抗折、抗压强度均逐渐降低,自然冷却后抗折强度残余率分别为11.3％、9.1％,抗...     

隧道下穿引起地下管线下沉的主控因素分析

城市地铁建设中,隧道开挖可能损坏上部土体中埋设的既有管线。如何控制管线沉降,从而保证其安全是地铁施工中必须考虑的问题。利用ANSYS有限元分析软件,模拟隧道开挖对刚性接口地下管线的影响,充分考虑了土质、管线参数及盾构施工参数等因素,分析了地下管线在不同因素影响下的沉降变化规律。计算结果表明,管线本身参数(除管材、直径外)对其沉降的影响相对较小,而土质及盾构施工参数对管线沉降的影响较为显著,应当予以重视。通过对北京某地铁区间隧道正交下穿钢筋混凝土雨水管的沉降实测资料与3种假设工况沉降计算值的对比分析,验证了前述结论的正确性。     

火电厂锅炉再热器联络管裂纹分析及处理

某火电厂亚临界锅炉墙式再热器蒸汽出口至屏式再热器联络管母管及排空气管接管座产生裂纹发生渗漏.通过对墙式再热器出口管道排空气管接管座裂纹特征、结构型式、管道现场布置情况、运行环境等方面进行综合分析,认为排空气管道安装布置不合理,无保温措施,导致冷凝水倒流,形成热疲劳裂纹并逐步延伸扩展.确认产生裂纹的原因后,优化管道安装布...     

超深井径向钻孔钛合金管转向阻力计算及安全评估

为了解决塔河油田6000 m及以上深井径向钻孔作业时管柱强度低、无法很好地传递钻压等问题,提出利用修井机和油管、钛合金管进行径向钻孔工艺,并通过数值模拟的方法优选有矫直段的单向弯曲转向轨道,研究轨道转向半径、钛合金管外径及壁厚、轨道与管柱间隙对钻进能力的影响,其次,通过正交试验方法,对上述参数进行敏感度分析并进行参数优...     

基于空气负离子浓度的建筑室内空气清洁度评价

对深圳某办公楼部分房间的空气负离子浓度分布进行了观测研究,利用空气离子单极系数和安倍空气离子评价指数对不同设备制冷的办公室空气质量进行了评价分析。结果表明:自然通风状态下的空气清洁度比机械通风状态下高,利用可再生能源制冷技术的室内空气质量比普通空调制冷技术的好,放置负离子发生器对室内空气质量有显著提高。因此提高室内负离子浓度可以创造舒适的空气环境,并建议把空气负离子浓度列为室内环境的监测和评价指标,为今后城乡建设规划、城市林业规划和环境能源保护提供科学依据和设计思路。     

山地城市排水管网特细颗粒物特性及变化规律

对山地城市排水管网中特细颗粒物的粒径分布特征及变化规律、Zeta电位分布特征及变化规律和ρ(SS)的变化规律进行研究,同时对相关水化学参数(如电导率、pH)的变化规律进行了分析.结果表明:特细颗粒物的平均粒径、Zeta电位、ρ(SS)和电导率分别为21.04～73.53μm、-20.83～-11.15 mV、106～492 mg/L和973～2 445μS/cm,其统计平均值分别为(43.74±14.12)μm、(-17.95±1.88)mV、(233±90)mg/L和(1 343±331)μS/cm;pH为7.25～7.63.工业废水的排入对排水管网特细颗粒物的粒径分布特征、Zeta电位分布特征以及电导率有显著的影响并呈现出一定的规律性;传统沉砂池对进水中特细颗粒物的去除能力相当有限,特细颗粒物会直接进入生物处理系统.