THE IMPACT OF URBANIZATION ON THE DISTRIBUTION OF HEAVY METALS IN BOTTOM SEDIMENTS OF THE SADDLE RIVER1

ABSTRACT: A three-year study has been conducted on a 4.6 mile stretch of the Saddle River near Lodi, New Jersey. The primary objectives of this investigation were (1) to provide baseline information on the concentration and distribution of heavy metals in bottom sediments of the Saddle River; (2) to qualitatively evaluate which parameters affect this distribution; and (3) to determine the effect of urbanization on the concentration and distribution of these materials. Significant enrichments of several heavy metals were observed in bottom sediments of the lower Saddle River near Lodi, New Jersey, as compared to the upper Saddle River. Attempts to correlate metal concentrations in bottom sediments with chemical-oxygen demand were not successful in demonstrating a relationship between these two factors. Metal concentrations were found to be strongly dependent upon particle size. In general, metal concentrations in bottom sediments increased with decreasing partical diameter. However, metals enrichment was observed to be considerably greater in the larger sediment fractions studied (>420μ) than the smaller sediment fractions as one proceeded downstream through the urban area. Since the larger sediment fractions are least effected by scour and transport they may best reflect the effect of urbanization on the distribution of heavy metals over an extended period of time at a given location.     

WATER USE AND WATER CONSERVATION BY THE COPPER MINING INDUSTRY1

ABSTRACT: This paper examines the use of water by copper mines for treating low grade ores. The froth flotation process for treating sulphide ore and the heap leaching process for treating oxide ore are described, and ways of reducing the amount of water used in these processes are discussed. Estimates of the costs reducing water consumption are given. Finally, the circumstances in which it would be desirable for a copper mine to reduce its level of water consumption are considered.     

基于监督局部映射的煤矿井下人员身份鉴别方法

为提高煤矿井下人员身份识别率,在局部保持投影(LPP)算法的基础上,提出监督局部映射(SLP)算法。该方法充分利用数据的局部和非局部信息及类别信息,对数据进行维数约简,使特征空间同类数据间的距离更小,不同类数据间的距离更大。该方法能够克服煤矿井下艰苦、空间受限环境中人脸、虹膜和指纹识别率不高的问题。在真实步态数据库上的实验结果表明,基于步态的煤矿井下人员身份鉴别是可行的。     

SC菌剂对废水中Cu~(2 )去除的初步研究

用研制的SC菌剂作生物吸附剂 ,研究了其在不同菌铜比 ,pH、温度及作用时间条件下对Cu2 的去除效果。结果表明 ,在获得的最佳条件下 ,对不同Cu2 浓度的印刷电路板废水中Cu2 的去除效果明显 ,达 95 48%和 86 74%。     

榆神矿区矿井水零排放可行性分析

针对榆神矿区给排水现状，分析矿区给排水关系和矿井水的利用途径，并提出矿井水零排放的技术、管理对策，达到减少新水索取，实现零排放。     

Electrochemical remediation of copper (II) from an industrial effluent Part II: three-dimensional foam electrodes

A batch recycle removal of copper ions from an industrial effluent by means of copper foam cathodes was tested. A constant current of 750 A was applied to the cell in order to perform the reduction. Copper depletion was investigated at different solution flow rates and a removal greater than 98% was obtained with a flow rate of 1000 l/h. The influence of initial metal concentration on copper deposition and current efficiency is also discussed.     

露天矿山岩质边坡台阶的平台宽度优化

矿山发生局部破坏的边界条件主要是由台阶的几何特征所决定,台阶边坡几何特征主要有台阶坡面角、台阶高度、台阶的平台宽度和台阶组合4要素。在对整体边坡角优化的同时,同样需要对台阶的宽度进行优化。通过分析台阶边坡特征,计算出不同规模破坏的边界条件,进而对矿山台阶的宽度进行优化。通过对一个矿山边坡算例的优化分析,在不改变整体边坡角的前提下,对台阶宽度进行优化,可以避免某些大规模的台阶破坏可能,提高矿山边坡的稳定性。     

基于矿井通风三维仿真系统软件的矿用空气幕选型方法

根据矿井风流调节的具体要求,合理选择矿用空气幕的型号是应用矿用空气幕技术的关键。在分析矿用空气幕选型依据及原理的基础上,应用矿井通风三维仿真系统软件模拟矿用空气幕运行的效果,来研究确定矿用空气幕的选型参数及影响因素。结果表明,应用矿井通风三维仿真系统软件所选择的矿用空气幕与理论推导的计算结果一致,此方法能够最大限度地反映矿山实际情况,具有直观、高效等特点。     

基于正交模拟试验的矿用空气幕结构优化

为了降低空气幕的能耗,依据空气动力学理论,建立了以双三次方曲线为整流器外轮廓线的矿用空气幕模型,采用正交模拟试验方法,以出风口速度分布均匀性及阻力损失为评价指标,研究了不同结构参数下矿用空气幕内流场分布规律,计算出矿用空气幕出风口断面的速度分布均匀性参数及压力损失,得到了最优的矿用空气幕结构模型,该模型风流速度均匀性参数为0.038 5,压力损失为98.3Pa.结果表明,压力漩涡的大小及流速滞留区的范围与整流器密切相关.对矿用空气幕出风口速度分布均匀性影响最大的是供风器出风口宽度,其次为导流体中截面半径;对矿用空气幕压力损失影响最大的是供风器出风口宽度,其次为整流器及供风器长度.当导流体为圆锥体时,矿用空气幕的性能最优.     

2种铀矿井下常用口罩对气溶胶粒子的过滤特性研究

为探究铀矿井下常用的2种口罩对气溶胶粒子的过滤特性,在我国南方某铀矿山,利用APS3321型空气动力学粒径谱仪对井下工作人员常用纱布口罩和KN95型口罩的过滤特性进行了研究.井下气溶胶监测数据显示,该铀矿井下典型作业场所PM10的质量浓度介于0.069～ 9.800 mg/m3,个数浓度介于173.918 ～2 561.600个/cm3;PM2.5的质量浓度介于0.039～0.479 mg/m3之间,个数浓度介于173.100～2 556.382个/cm3之间.口罩过滤特性试验结果表明:1)KN95型口罩和纱布口罩对PM10的平均过滤效率分别为95％和76％,对PM2.5的平均过滤效率分别为93％和61％,可见KN95型口罩过滤效率明显高于纱布口罩;2)在0.5～3.5 μm粒径范围内,2种口罩对颗粒物的过滤效率均随粒径增大而增大,在3.5～ 10μm粒径范围内,2种口罩对不同粒径颗粒物的过滤效率均接近100％;3)无论从质量浓度还是个数浓度来看,经口罩过滤后的气溶胶粒子大多数分布在2.5μm粒径范围内,表明PM2.5是主要的气溶胶污染物.