城市污泥中铜锌的化学形态及其去除

利用连续提取法研究了城市污泥中铜和锌的化学形态,结果表明:污泥中铜和锌都以稳定性较好的硫化物及有机结合物、残渣态形式存在,生物毒性较小,通过适当处理后可以安全加以利用;在此基础上,研究了利用乙酸和双氧水去除污泥中铜和锌的适宜工艺条件,结果表明:在室温条件下,在pH值为4的环境中,利用添加H_2O_2的浓度为2mol/L的乙酸溶液,反应时间为4h,就可以将污泥中超过95%以上的铜和锌淋滤去除。     

铜在干湿交替条件下的大气腐蚀

以(NH4)2SO4(0.01 mol/L) NaHSO3(0.01 mol/L) NaCl(0.01 mol/L)为腐蚀介质,采用干湿交替复合循环试验,利用XPS、SEM表面分析技术,研究了HSO3-、Cl-和NH4 对铜的腐蚀影响,探讨了铜在该试验条件下的腐蚀机制.结果表明,铜在该条件下的质量损失随试验时间呈线性增加,其腐蚀率基本恒定,腐蚀产物不具有保护性;腐蚀产物主要为Cu2O、CuO及碱式硫酸铜.XPS分析技术用于腐蚀表面的化学成分测定是很有效的.     

悬浮电解法回收废旧电子印刷线路板中的铜

以废旧电子印刷线路板中的金属铜为处理对象,采用悬浮电解法制取纯铜粉。选择了4个影响铜粉的纯度、脱落率和电流效率的因素,每个因素3个水平进行正交实验。实验结果表明,硫酸铜的浓度、氯离子的浓度和电流密度对铜粉的纯度、脱落率和电流效率有较大的影响。通过对正交实验结果的分析得出最优的电解条件,在此电解条件下可得到铜粉的纯度99.8%、脱落率99.6%和电流效率99.7%。     

铬离子对SBR工艺活性污泥毒性作用研究

针对重金属铬离子对SBR工艺系统中活性污泥的毒性作用,通过检测不同初始污泥容积指数(SVI)下SBR工艺活性污泥在不同铬负荷下的COD值、挥发性污泥浓度以及受铬离子影响的污泥容积指数(SVI),研究重金属铬离子对活性污泥的毒性作用以及对SBR工艺系统处理污水的影响。研究表明,重金属铬离子会导致SBR工艺系统出水COD升高;将铬离子对活性污泥的毒性作用按照挥发性污泥(MLVSS)铬负荷可划分为耐受范围、非耐受范围、细胞失活范围以及细胞分解范围。耐受范围铬负荷低于约30 mg Cr3+/gMLVSS,此范围内铬离子对于活性污泥的毒性作用不大,不致于导致系统出水水质变差;非耐受范围铬负荷在约30~65 mg Cr3+/g MLVSS,在铬离子作用下系统出水COD值明显高于对照系统;细胞失活范围铬负荷在约70~100 mg Cr3+/gMLVSS范围内,SVI大幅下降,微生物部份死亡和失活,出水COD尽管有一些下降,但与进水COD相比差不了多少;细胞分解范围铬负荷在约100 mg Cr3+/gMLVSS以上,微生物大量死亡,部分死亡细胞分解,系统出水COD值因微生物的死亡分解而超出进水COD值,受铬离子影响的系统SVI值大幅度降低。     

膜电解法从模拟酸性蚀刻废液中回收铜粉

酸性蚀刻废液是一种印制电路板制作过程中产生的强酸、高铜的工业废水,对其回收利用具有较高的经济价值。采用膜电解法处理模拟酸性蚀刻废液,在阴极区回收铜粉。研究了铜粉的形成条件,考察了阴极液铜浓度、温度和电流密度对阴极电流效率的影响。结果表明,阴极液的铜浓度在20~25 g/L,温度为45~50℃,电流密度在11~12 A/dm2,阴极的电流效率最高。随着阴极液酸度的增加,铜粉的纯度提高,但阴极电效会降低。为保证较高的铜粉纯度及阴极电效,阴极液的酸度在0.32~0.36 mol/L为宜。     

The profile of antibiotics resistance and integrons of extended-spectrum beta-lactamase producing thermotolerant coliforms isolated from the Yangtze River basin in Chongqing

The spreading of extended-spectrum β-lactamases (ESBL)-producing thermotolerant coliforms (TC) in the water environment is a threat to human health but little is known about ESBL-producing TCs in the Yangtze River. We received 319 ESBL-producing stains obtained from the Chongqing basin and we investigated antibiotic susceptibility, bla gene types and the presence of integrons and gene cassettes. 16.8% of TC isolates were ESBL-producing bacteria and bla_TEM+CTx-M was the predominant ESBL type. 65.2% of isolates contained class 1 integrons, but only 3 carried intI 2. Gene cassettes were amplified and sequenced. aadA, drfA, cmlA, sat1, aar3 and two ORF cassettes were found. In conclusion, Yangtze River is heavily polluted by ESBL-producing TC bacteria and the combined bla gene type could enhance antibiotic resistance. Class 1 integrons were widespread in ESBL-producing isolates and play an important role in multi-drug resistance. Characterization of gene cassettes could reveal the dissemination of antibiotic resistance genes.     

Characterization of the first step involved in enzymatic pathway for microcystin-RR biodegraded by Sphingopyxis sp. USTB-05

Enzymes encoded by genes biodegrading microcystins (MCs) can help reveal the function of genes and biodegradation pathway of MCs. Here the first and important gene (USTB-05-A, 1,008 bp) involved in biodegradation of microcystin-RR (MC-RR) was cloned from Sphingopyxis sp. USTB-05 and firstly expressed in Escherichia coli BL21 (DE3) with an expression vector of pGEX4T-1 successfully. The nucleotide sequences of cloned USTB-05-A possessed 92.5% homology to that of mlA reported in Sphingomonas sp. strain ACM-3962. The deduced amino acid sequences containing the cleavage sites of 26th (alanine) and 27th (leucine) showed 83% identical to that of MlrA. The cell-free extract (CE) of recombinant E. coli BL21 (DE3) containing USTB-05-A had high activity for biodegrading MC-RR. Initial MC-RR of 40 mg L⁻¹ was completely biodegraded under total protein of 350 mg L⁻¹ within 0.25 h. A product derived from MC-RR appeared distinctly with the decrease of MC-RR peak on the profile of HPLC. The product (m/z 1056.5) had molecular weight of 18 higher than that of MC-RR (m/z 1038.7). The findings provided the positive evidences that biodegradation of MC-RR began with the breakage of cyclic MC-RR and then it was converted to linear MC-RR as the first product catalyzed by first enzyme of Sphingopyxis sp. USTB-05.     

阳离子交换膜对Cu2+离子交换的动力学及热力学研究

对阳离子交换膜离子交换Cu2+的动力学及热力学现象进行了研究,结果表明:温度25℃,溶液pH=6时,干膜对Cu2+饱和交换容量为0.506 mmol/g;随Cu2+初始浓度的升高,离子交换速率常数随之增加;随温度升高,离子交换速率常数随之增加;随转速升高,离子交换速率常数随之增加;离子交换过程与一级反应速率方程拟合结果良好;△G0<0,表明离子交换反应能自发进行;△H0m>0,表明的交换反应为吸热反应;△S0>0,表明交换反应是熵变增加的反应。     

线路板园区综合废水碱法除铜优化实验

线路板废水中的铜主要以络合态存在,破络除铜是其处理稳定达标的关键环节。为了降低运行费用和产泥量,同时为后期的工程升级改造提供依据和参考,实验研究了碱法破络除铜最佳pH值、Na2S/Cu摩尔比、反应时间和絮凝剂种类的选择等,并从处理效率、投药成本、污泥产量多方面考核,确定最佳运行条件:以NaOH调节pH到10.5左右,Na2S与进水总铜摩尔比为1.5∶1～2∶1,反应30 min,再加100 mg/L的PAC和3 mg/L的PAM混凝反应,沉淀0.5 h,出水铜浓度低于0.3 mg/L,达到《电镀污染物排放标准》(GB 21900-2008)中的总铜排放标准。     

耐盐石油降解菌性能及降解条件优化

从冀东油田钻井废液中筛选分离出耐盐石油降解菌Virgibacillus sp.(简称SJ菌),其在高含盐条件下对石油具有较好的降解效果,高达56.12%左右。考察了pH值、盐度、不同N和P形态等因素对SJ菌降解石油效果的影响。结果表明:SJ菌有较宽的pH值适应范围(pH值为6～10)和较好的耐盐能力(0.5%～20%),在pH值为9及NaCl质量浓度为5%时对石油类降解效果最好,其最佳利用N源和P源分别为(NH2)2CO和KH2PO4,该研究为油田高含盐含油废液处理提供了一条新途径。