新疆“三十里风区”输电线路复合绝缘子故障分析

复合绝缘子是超高压输电线路中的关键设备之一,确保其可靠运行是维护电网安全的前提。新疆乌鲁木齐至吐鲁番750kV输电线路途径"三十里风区",当地10米高度处最高设计风速为42m/s,这对复合绝缘子的长期运行是一个巨大挑战。强风下的绝缘子伞裙摆动导致其根部材料疲劳,进一步产生微观裂纹,最终导致绝缘子撕裂故障。本文通过气候环境调研,分析了当地气候环境特征;通过故障分析,初步探明乐儿复合绝缘子伞裙撕裂过程;通过风洞实验研究,得到了伞裙在流体中的动态现象。通过以上分析,对于这项特殊微气候环境下的外绝缘典型故障,本研究探明强风下伞裙动态过程,并在伞裙故障产生原因方面进行一定探索,为最终解决该问题提供了有力的技术参考。     

Evaluation of recycling efforts of aircraft companies in Wichita

The number of manufactured aircraft has been continuously increasing worldwide because of the high demand for airline transportation. During manufacturing, many advanced materials and devices are used to build various sizes and shapes of aircraft. However, most of these materials and devices require considerable energy and labor to produce, so reusing these at any life stage of the aircraft offers many economic and environmental benefits, and is considered lucrative and environmentally responsible. Several recyclable materials—composites, metals and alloys, wires, wood, paper, plastics, electronics, and avionics—emerge as waste streams during the manufacturing of aircraft. Many aircraft companies have been recycling these materials to remanufacture aircraft parts or other products for more sustainable production. In the present study, we evaluated the recycling efforts of local aircraft companies in Wichita, KS. These efforts were considered in terms of recycling efficiency/rate and environmental benefits. These included cradle-to-gate (CTG) life-cycle inventory analysis of the materials, carbon dioxide emissions, virgin material replacement with recycled materials, and natural resources usage. Our findings show that there exists a significant potential for contributions to sustainability as well as environmental and health benefits in the region from recycling by aircraft manufacturing plants.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

再生塑料粉煤灰复合材料井盖

将废塑料、粉煤灰、农作物秸杆等固体废弃物通过自主创新技术成功地制备了市政工程制品：井盖、井箅等。具有抗压、抗冲击性能优良;成本低;环境友好;美观;安全等特性。     

纸浆模塑缓冲材的技术研究

聚苯乙烯发泡塑料（EPS）作为缓冲包装的内衬件广泛用于电子产品的内包装,但其所带来的白色污染问题也日益严峻。研究以再生资源（废纸）为原料,生产产品内衬包装物——纸浆模塑缓冲材,并使其产业化,以替代发泡塑料包装物,改变发泡塑料包装物难降解所带来的污染和危害,并实现“废弃物—产品”的资源循环利用。     

Review and future of active disassembly

Disassembly has been widely accepted as a disadvantageous end-of-life activity, but with increasing pressures from directives, such as waste on electrical and electronic equipment, and with increasing pressures to become sustainable disassembly is becoming necessary. Current disassembly methods, including both manual and automated disassembly, need improvements to meet this necessity. This paper will introduce the improvements needed and suggest through literature the validity of active disassembly (AD) to provide these improvements. Past and current research will also be considered to provide a future path for AD. This future path for AD will consider a collaborative effort to solve problems with materials, environmental triggers and costs seen with AD.     

Mg-La-Fe/沸石复合材料的制备及其处理低浓度含磷废水的性能

以沸石为载体,选用镁、镧和铁为改性剂,采用水热法制备了一种新型高效且易于磁性分离回用的载镧磁性沸石吸附剂（MLFZ）.等温吸附和动力学研究结果表明,其吸附行为符合Langmuir等温模型和准二级动力学模型,MLFZ饱和吸附量为13.46 mg·g^-1; MLFZ在pH为3～9范围内均表现出良好的吸附性能,共存离子条件下对磷酸根具有特异吸附能力,通过磁性吸附重复使用5次后,MLFZ对磷酸盐去除率维持在90%左右,突显了其易于回收再利用的优点;FTIR、 XPS和Zeta电位表征显示,表面沉积、静电吸附作用和镧与磷酸盐通过配体交换形成内层络合物在吸附过程中为主要作用.将MLFZ用于处理自然池塘污水,结果显示磷酸盐浓度由0.86 mg·L^-1降低到0.013 mg·L^-1,表明该吸附剂具有良好的实际应用前景.     

Quantification of uncertainty of experimental measurement in leaching test on cement-based materials

When mineral wastes are reused in construction materials, a current practice is to evaluate their environmental impact using standard leaching test. However, due to the uncertainty of the measurement, it is usually quite difficult to estimate the pollutant potential compared to other materials or threshold limits. The aim of this paper is to give a quantitative evaluation of the uncertainty of leachate concentrations of cement-based materials, as a function of the number of test performed. The relative standard deviations and relative confidence intervals are determined using experimental data in order to give a global evaluation of the uncertainty of leachate concentrations (determination of total relative standard deviation). Various combinations were realized in order to point out the origin of large dispersion of the results (determination of relative standard deviation linked to analytical measured and to leaching procedure), generalisation was suggested and the results were compared to literature. An actual example was given about the introduction of residue (meat and bone meal bottom ash--MBM-BA) in mortar, leaching tests were carried out on various samples with and without residue MBM-BA. In conclusion large dispersion were observed and mainly due to heterogeneity of materials. So heightened attention needed to analyse leaching result on cement-based materials and further more other tests (e.g. ecotoxicology) should be performed to evaluate the environmental effect of these materials.     

Utilization of calcite and waste glass for preparing construction materials with a low environmental load

In this study, porous calcite materials are hydrothermally treated at 200 °C using powder compacts consisting of calcite and glasses composed of silica-rich soda-lime. After treatment, the glasses are converted into calcium aluminosilicate hydrates, such as zeolite phases, which increase their strength. The porosity and morphology of new deposits of hydrothermally solidified materials depend up on the chemical composition of glass. The use of calcite and glass in the hydrothermal treatment plays an important role in the solidification of calcite without thermal decomposition.     

HMX的氟橡胶包覆技术及其撞击感度研究

采用超临界流体SAS法,以氟橡胶（FPM2602）为钝化包覆剂,对主体炸药超细奥克托今（HMX）的粒子表面均匀包覆,制备出超细HMX为基传爆药。对系统温度、系统压力、溶液浓度等参数进行实验研究,用红外光谱（FT-IR）和扫描电镜（SEM）对包覆后超细HMX进行了表征,并对其撞击感度进行了测试。结果表明：溶液浓度是影响包覆效果的最主要因素;当系统温度45℃,系统压力9.5MPa,溶液浓度为0.4g/ml,通气时间为20min条件下,氟橡胶均匀包覆在超细HMX颗粒表面,包覆后颗粒呈0.4-1μm球状,包覆后造型粉特性落高H50为38.50cm（12型工具、2.5kg落锤）,撞击感度比原料（H50为26.30cm）明显降低。