金属材料在盐湖卤水中的耐蚀性

通过现场暴露试验获得了12种典型金属材料在盐湖卤水中暴露181d、415d和810d的腐蚀结果,讨论了它们在卤水中的耐蚀性。TH200、QT500-5、Q235和16Mn在盐湖卤水中的耐蚀性较好。QT500-5的耐蚀性好于TH200。304、316L和430不锈钢在盐湖卤水中发生较轻的点蚀和缝隙腐蚀,耐蚀性较好;其耐蚀顺序为316L>304>430。T2、QSi3-1在盐湖卤水中有好的耐蚀性。L6、6066和LC4(BL)在盐湖卤水中发生严重的点蚀和缝隙腐蚀,耐蚀性差。     

我国大气腐蚀研究进展(续一)

总结了近几年来我国在大气腐蚀方面的研究现状和进展,尤其是国产、常用、量大、面广的4大类材料在我国9类主要典型大气环境下的腐蚀数据积累：各类典型材料在典型环境下的大气腐蚀行为规律;大气环境因素对材料大气腐蚀的影响;碳钢、低合金钢大气腐蚀行为预测。特别是根据8年试验结果所总结出的大气腐蚀速度与试验时间之间具有幂函数关系的基础上．又进一步建立了腐蚀速度与合金元素之间的数学模型关系;探讨了采用ACM技术评估大气腐蚀严酷性;初步建立了大气腐蚀数据库．并正进一步采用计算机发展网络查询服务系统,实现科学数据共享;经20余年之研究．撰写了并出版中国材料自然环境腐蚀专著中大气腐蚀篇,还研制和生产了经济耐候钢。     

Using SFA indicators to support environmental policy

In order to improve the link from Substance Flow Analysis (SFA) studies to environmental policy, a translation is made from the SFA overview of flows and stocks into a limited set of indicators. This set is designed to evaluate a region’s substance regime with regard to environmental quality and sustainable development, including problem shifting in time and space.     

镁盐改性活性炭对普拉红B的吸附性能研究

运用化学沉淀-原位复合法制得氢氧化镁/活性炭复合材料(Mg(OH)2/AC),对其比表面积和XRD谱进行了表征,考察了该复合材料对普拉红B的脱色性能.结果表明,在293～313 K下,Langmuir模型和Freundlich模型都能很好地描述Mg(OH)2/AC对普拉红B的等温吸附过程,而Langmuir模型更为合适...     

累托石/氧化亚铜纳米复合材料的制备及光催化性能研究

以累托石为载体,用液相合成法制备了累托石/纳米氧化亚铜复合材料,采用SEM、XRD对其进行了表征,并以吸附降解亚甲基蓝的效果探讨了复合材料的吸附及光催化性能.结果表明,在最佳条件为:溶液呈碱性,亚甲基蓝初始浓度90 mg/L,复合材料用量1.33 g/L,温度60℃,反应20 mim时复合材料对亚甲基蓝的降解率可达到9...     

Relationship of surface changes to metal leaching from tungsten composite shot exposed to three different soil types

Physical changes that occur on the surface of fired shots due to firing and impact with soil may increase the dissolution of muniton metals. Increased metal dissolution could potentially increase metal transport and leaching, affecting metal concentrations in surface and groundwater. This research describes the relationship between the surface changes on fired tungsten-nickel-iron (94% W:2% Ni:4% Fe) composite shots and metals leaching from those shots. Tungsten composite shot was fired into, and aged in, three soil types (Silty Sand, Sandy Clay, and Silt) in mesoscale rainfall lysimeters to simulate live-fire conditions and subsequent interactions between the metals of the composite and soil. Leachate, runoff, and soil samples were collected from the lysimeters and analyzed for metal content. The shots were analyzed using scanning electron microscopy (SEM) to evaluate surface changes. SEM results indicated that a soil’s particle size distribution initially affected the amount of metal that was sheared from the surface of the fired W-composite shots. Shearing was greatest in soils with larger soil particles (sand and gravel); shearing was least in soils composed of small soil particles (fines). Increased metallic shearing from the shot’s surface was associated with increased W dissolution, compared to controls, following a simulated 1 year soil aging.     

TiO2/活性炭复合纳米纤维膜对亚甲基蓝的吸附研究

摘要以自制的TiO2/活性炭复合纳米纤维膜作为吸附剂,以亚甲基蓝为目标污染物,研究了亚甲基蓝初始浓度、温度、TiO2/活性炭复合纳米纤维膜投加量、pH等对TiO2/活性炭复合纳米纤维膜吸附去除亚甲基蓝的影响,并研究了TiO2/活性炭复合纳米纤维膜的Zeta电位、接触角、光催化再生性能.结果表明:(1)静态吸附时,随着亚...     

缺氧池填料投配比对A~2/O-MBR工艺反硝化除磷的影响

按20%的投配比往好氧1,2池中加入相同数量的悬浮式填料,将传统A2/O工艺转变为A2/O-MBR复合工艺。通过处理实际市政污水,重点考察了在缺氧池中不同填料投配比条件下,复合工艺的去除效果以及反硝化除磷效果。实验结果表明,当缺氧池中填料投配比为20%时,装置总体的处理效果最好。COD、总氮、氨氮和总磷的去除率分别达到了81.1%、80.3%、100%和85.2%。当投配比为10%时,反硝化除磷效果最明显,占总除磷量的48.3%。从经济角度出发,10%的投配比为最佳投配比。     

新型火工药剂的几种技术

介绍了火工药剂的概念及其发展趋势,重点阐述了新型火工药剂的几种技术,分别对国内外火工药剂的情况进行了分析,随着火工药剂在工业、国防等领域中的发展,各个领域对火工药剂技术提出了新要求.     

惠州大亚湾石化区综合污水处理厂技改尝试

为提高污水处理效果,降低运行成本,惠州大亚湾石化区综合污水处理厂针对实际来水状况,对原有工艺进行一系列工艺技术改造,改造后工艺系统运行良好,出水水质较高,达到广东省《水污染物排放限值》(DB4426-2001)第二时段一级标准。惠州大亚湾石化区综合污水处理厂的小水量技术改造表明:通过有效的技术改造和调整技术管理措施,可提高污水处理率、减少环境污染、降低生产成本、减少资源浪费。