某热电厂灰坝工程坝坡稳定性分析

某热电厂灰坝由粘聚力较小的石渣填筑,而粘聚力较小的砂粘土、砂土、砾石、碎石等筑成的土坡、大坝,边坡破坏时其破裂面近似平面,在横断面上近似直线.利用此理论,在有渗水和无渗水作用时对该灰坝外侧坝坡进行稳定性分析.     

RESEARCH: Optimizing the Mix of Strategies for Control of Vehicular Emissions

/ A number of strategies for the control of vehicular emissions are being considered by the Philippine government to address Metropolitan Manila's air quality problem. An analytical tool is needed for optimizing criteria pollutant reductions given the budgetary constraints. The simplest approach is to take costs and pollutant removals to be linear with each strategy's scale of activity, and this is readily solved as a linear programming problem. Another approach is to use a dynamic system of weights which shift with progressive improvements in pollutant emissions. The two approaches yield somewhat different results, suggesting the sensitivity of the solution to the assumed weights. The study also illustrates the importance of a sound methodology for evaluating priorities given to different air quality goals. One such methodology may involve a polling of expert panels and the public to gain insight into the relative importance given to competing emissions reduction goals. An informal polling of resource agency staff was conducted and discussed in this paper. The authors take the position that proper planning involves tracing intermediate steps to the final outcome and not just focusing on the latter.KEY WORDS: Vehicular emissions; Urban air quality; Emissions control; Optimization; Manila; Environmental systems analysis     

滑行车类游乐设施动力学建模与仿真

根据滑行车类游乐设施运行速度高、加速度大、载荷工况复杂,发生事故后果非常严重的现状,认为深入的动力学分析、结构强度校核和寿命分析预测对保证其安全性尤为必要。因而分析滑行车的结构原理,提出其多体系统拓扑构型,包括轮轨关系模型、各零部件之间约束模型。运用图形学方法研究了滑行车轨道建模参数提取和坐标变换技术。通过仿真分析,在设计阶段就可获得滑行车在不同工况下运行时各部件的速度、加速度及载荷时间历程,为结构设计、安全性评估提供可靠依据。实例表明,分析结果与实测数据非常接近,所提出的建模方法是可行的。     

薄层色谱紫外分光光度法定量测定微生物发酵产物辅酶Q10

报道了一种微生物发酵液中辅酶Q10的定量检测方法.该方法分为两个步骤:第一步是离心收集菌体和结合使用超声波处理的辅酶Q10丙酮抽提;第二步是硅胶薄层色谱,根据标样位置取产物斑点乙醇洗脱后用紫外分光光度法测定辅酶Q10含量.结果表明,该方法具有操作简便、重复性好、相对误差小等优点,可用于细菌发酵生产辅酶Q10研究过程中发酵产物的快速定量检测.图2表2参6     

关于区域可持续发展的系统分析

本文从更高、更新、更综合的高度和角度,对区域社会可持续发展系统进行了单元要素分析、结构层次分析。提出了三单元要素、三结构层次、三种发展类型的设想。这种分析尽管还是初步的、定性的、不很深刻的,但是为研究可持续发展系统提供了一种新的思路。     

Nanocomposites of Cellulose Acetate Butyrate Reinforced with Cellulose Nanocrystals

Nanocrystals were prepared by acid hydrolysis of bacterial cellulose microfibrils. These were topochemically trimethylsilylated, in an attempt to reduce their hydrophilicity. Composites were made by dispersing either native or silylated crystals in cellulose acetatebutyrate matrixes and solution casting of the dispersions. Particles were characterized by transmission electron microscopy. The composites were characterized by differential scanning calorimetry and dynamic mechanical analysis. The unmodified cellulose crystals exhibited better reinforcement characteristics than the trimethylsilated crystals.     

Structure of pathways in ecological networks: relationships between length and number

In ecosystems network, structure determines adjacent (direct) and non-adjacent (indirect) pathways over which energy, matter, and information can flow. The more pathways, the more possible ways the conservative substance can move in zero-sum transactions between network nodes that the pathways interconnect, and the more possible non-conservative, nonzero-sum relations can be secondarily derived from these. Structural analysis is a tool we employ, from a family of input–output methods for exploring zero- and nonzero-sum attributes of environmental networks, to count pathways of varying length between network nodes. In this paper, we examine the relationship between pathway length (k) and number (P_k) as determined by system size (n, number of nodes) and extent and pattern of connectance (C). We develop a measure (m_a) of pathway growth in numbers with increasing length, and then normalize this to the maximum rate possible (m_a/m_c) for a given system size. These measures apply to two pathway types—paths, m_a(0) and m_a(0)/m_c(0), which forbid adjacent node repetitions, and walks, m_a(1) and m_a(1)/m_c(1), which allow them. We find that network size has a curvilinear effect on the pathway number versus length relationship, and extent and pattern of connectance are convolved. Values computed for the paths and walks of three ecosystem models (oyster reef, freshwater marsh, and reservoir cove) are used to compare their pathway structure.     

圆锥形零件冲压成形过程分析

通过分析圆锥形零件变形毛坯上不同部分在成形中的作用,揭示了该类零件的冲压成形特点,得出了悬空侧壁部分的变形状态是该类零件成形的关键,而径向拉应力是实现侧壁部分成形的必要条件,同时也是这部分冲压成形成败的关键。为此,经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式,为进一步研究提供了理论基础。     

控制论在企业环境管理中的应用

在企业环境管理运用控制论实施污染防治全过程控制，来提高清洁生产水平，降低物耗，能耗，提高资源利用率，完善保护环境的自我约束机制，落实环境综合整治定量考核，以达到发展生产，提高经济效益和改善环境的目的。