培养藻类制取生物能源的研究

能源紧张和环境污染是全世界所面临的共同问题,用藻类替代传统作物生产生物能源是生物质能的重要发展方向之一。文章介绍了国内外对藻类培养条件、光生物反应器型式、藻类基因工程、藻细胞收集方法以及能源藻类生产系统的研究成果。研究认为,以藻类为原料生产生物燃料具有良好的发展前景,并指出了今后能源藻类生长的重点研究方向。     

Assessment Tools for Urban Catchments: Defining Observable Biological Potential1

Abstract: Urbanization represents a strong and increasingly more prevalent impact on stream quality worldwide. One of the characteristic effects of increased urbanization is a consistent decline in biological stream condition. The characterization of this biological degradation with increasing urbanization presents a number of advantages for the study and management of urban streams and catchments. In this paper, the limitation of biological condition with urbanization, called observed biological potential, is characterized. Using an urban intensity index and a biological index developed specifically for urban systems in the Baltimore, Maryland; Cleveland, Ohio; and San Jose, California regions, two principal techniques were compared (quantile regression and bin regression) to define observed biological potential along urban gradients. Quantile regression was selected as the preferable tool for describing observed biological potential given the consistency with which it can be applied and its statistical efficiency, however, bin quantile regression performed similarly. Having identified a numeric approximation of observed biological potential, two methods for identifying factors related to distance from potential as a way of identifying critical environmental factors affecting biological condition in urban areas were explored. The results of this work can be used for identifying benchmarks for urban stream biological condition, identifying limiting catchment characteristics, and prioritizing urban stream management efforts.     

20^#钢板镀铬在海洋环境条件下的腐蚀行为分析

本文根据20^#钢板镀铬材料在我国海洋环境的暴露结果,对20^#钢板镀铬材料在我国海洋环境条件下的腐蚀速度及腐蚀原因进行分析。     

A strategy for aromatic hydrocarbon bioremediation under anaerobic conditions and the impacts of ethanol: a microcosm study

Increased use of ethanol-blended gasoline (gasohol) and its potential release into the subsurface have spurred interest in studying the biodegradation of and interactions between ethanol and gasoline components such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) in groundwater plumes. The preferred substrate status and the high biological oxygen demand (BOD) posed by ethanol and its biodegradation products suggests that anaerobic electron acceptors (EAs) will be required to support in situ bioremediation of BTEX. To develop a strategy for aromatic hydrocarbon bioremediation and to understand the impacts of ethanol on BTEX biodegradation under strictly anaerobic conditions, a microcosm experiment was conducted using pristine aquifer sand and groundwater obtained from Canadian Forces Base Borden, Canada. The initial electron accepter pool included nitrate, sulfate and/or ferric iron. The microcosms typically contained 400 g of sediment, 600 approximately 800 ml of groundwater, and with differing EAs added, and were run under anaerobic conditions. Ethanol was added to some at concentrations of 500 and 5000 mg/L. Trends for biodegradation of aromatic hydrocarbons for the Borden aquifer material were first developed in the absence of ethanol, The results showed that indigenous microorganisms could degrade all aromatic hydrocarbons (BTEX and trimethylbenzene isomers-TMB) under nitrate- and ferric iron-combined conditions, but not under sulfate-reducing conditions. Toluene, ethylbenzene and m/p-xylene were biodegraded under denitrifying conditions. However, the persistence of benzene indicated that enhancing denitrification alone was insufficient. Both benzene and o-xylene biodegraded significantly under iron-reducing conditions, but only after denitrification had removed other aromatics. For the trimethylbenzene isomers, 1,3,5-TMB biodegradation was found under denitrifying and then iron-reducing conditions. Biodegradation of 1,2,3-TMB or 1,2,4-TMB was slower under iron-reducing conditions. This study suggests that addition of excess ferric iron combined with limited nitrate has promise for in situ bioremediation of BTEX and TMB in the Borden aquifer and possibly for other sites contaminated by hydrocarbons. This study is the first to report 1,2,3-TMB biodegradation under strictly anaerobic condition. With the addition of 500 mg/L ethanol but without EA addition, ethanol and its main intermediate, acetate, were quickly biodegraded within 41 d with methane as a major product. Ethanol initially present at 5000 mg/L without EA addition declined slowly with the persistence of unidentified volatile fatty acids, likely propionate and butyrate, but less methane. In contrast, all ethanol disappeared with repeated additions of either nitrate or ferric iron, but acetate and unidentified intermediates persisted under iron-enhanced conditions. With the addition of 500 mg/L ethanol and nitrate, only minor toluene biodegradation was observed under denitrifying conditions and only after ethanol and acetate were utilized. The higher ethanol concentration (5000 mg/L) essentially shut down BTEX biodegradation likely due to high EA demand provided by ethanol and its intermediates. The negative findings for anaerobic BTEX biodegradation in the presence of ethanol and/or its biodegradation products are in contrast to recent research reported by Da Silva et al. [Da Silva, M.L.B., Ruiz-Aguilar, G.M.L., Alvarez, P.J.J., 2005. Enhanced anaerobic biodegradation of BTEX-ethanol mixtures in aquifer columns amended with sulfate, chelated ferric iron or nitrate. Biodegradation. 16, 105-114]. Our results suggest that the apparent conservation of high residual labile carbon as biodegradation products such as acetate makes natural attenuation of aromatics less effective, and makes subsequent addition of EAs to promote in situ BTEX biodegradation problematic.     

底质农残测定中固相柱净化体系的选择

使用固相柱对底质中的7种农残进行净化。结果表明,在相同淋洗条件下,使用氟罗里硅土柱比硅胶柱净化效果好。比较了不同溶剂体系、不同溶剂配比下2种萃取柱的净化效果,选择乙醚-正己烷(体积比1∶2)或丙酮-正己烷(体积比1∶4)作为净化溶剂,较小的收集体积都可满足所有目标化合物的回收率要求;相比较而言,丙酮-正己烷(体积比1∶4)作为净化溶剂,洗脱液的杂质干扰更小,净化效果更好。使用氟罗里硅土柱和丙酮-正己烷(体积比1∶4)对样品净化,方法简单,快速,净化效果好,适合大批量底质样品的前处理净化过程。     

天津城市污水泵站恶臭气体组分浓度及污染现状

为了解天津城市污水泵站恶臭的污染程度,选取天津市一个典型的城市污水泵站进行为期3天的采样,采集该污水泵站距离污染源强不同距离处的恶臭气体样品,用气相色谱-质谱联用仪（GS-MS）和分光光度法对采集样品的组分含量进行检测,比较了恶臭排放源点和不同距离处的恶臭组分的浓度特征和污染现状。结果表明,该泵站恶臭污染物质以硫化氢、二氯甲烷和苯系物为主,还有一些烯烃和芳香烃衍生物;恶臭物质的浓度变化范围是n.d.~0.073 7 mg/m³,大部分恶臭物质浓度一般由高至低表现为源点>下风向5 m,源点>背景值,环境空气采样点与恶臭排放源相比,其降幅明显;虽然检测到的恶臭组分较多,但是其浓度与《恶臭污染物排放标准》（GB 14554—1993）等标准中规定的排放限值相比,均未超标。     

成都PM2.5与气象条件的关系及城市空间形态的影响

2013年2月1日至3月20日、2013年7月10日至8月10日对成都市大气中细颗粒物(PM2.5)进行连续监测,同步记录气象数据。将PM2.5质量浓度与城市气象条件进行相关性分析,研究气象条件对PM2.5质量浓度的影响。2月1日至3月20日PM2.5质量浓度平均为147.38μg/m3,7月10日至8月10日平均为50.19μg/m3,大气细颗粒物污染最严重的时间出现在2月1—6日。成都市各气象条件中,PM2.5质量浓度与能见度、风速呈现显著负相关,而与其他气象要素相关性较弱,降水对PM2.5质量浓度影响也很大。改善城市通风有利于成都市大气中PM2.5的稀释和消散。通过建立3D模型并运用计算流体力学(CFD)软件模拟成都市选定的一处密集的建成区域,分析城市空间形态对通风的影响。研究发现,在假设等温的情况下,多层密集的区域对城市通风影响小,而高层对城市通风影响很大,建筑高度相近的街道与风向平行的风速大于与风向成角度的,与风向平行的街道沿线为高层的风速高于沿线为多层的,较大的开敞空间及背景风速更有利于城市通风环境。     

含氟废气对农业环境的影响

叙述了某厂氢氟酸生产过程排出的含氟废气对厂区周围水稻和蔬菜的污染及其与气象条件的关系，并提出了防止农业环境氟污染的措施。     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效,针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点,建立了腐蚀管道强度损失随机模型;借助可靠性理论,通过分析管道腐蚀进程的时变性特点,将管道系统由损伤积累和抗力衰减导致的剩余强度随机化;提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中,而相关系数和拉伸强度影响较小;若腐蚀速率Va=0.2 mm/a,VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时,建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

气象条件对静电除尘器低温腐蚀的影响分析

在已建成投产的静电除尘器当中,低温腐蚀是严重影响除尘器使用寿命的因素之一。以某烧结厂静电除尘器为研究对象,利用CFD软件,采用标准k-ε湍流模型对除尘器内部流场及温度场的分布进行数值模拟研究,得到静电除尘器内部流场和温度场分布特征,分析这些数据可知除尘器温度最低部位位于灰斗处,外界气温对壳体温度具有正相关的影响,在此基础之上有针对性地提出对静电除尘器壳体低温腐蚀的防治措施。