瑞平塘河氟化物污染状况调查及溯源研究

以2016—2020年地表水常规监测结果为依据,发现瑞平塘河自2017年起出现氟化物质量浓度升高现象,2020年其中1个断面氟化物质量浓度平均值达到1.25 mg/L,比2016年高出145%。为此于2021年3—6月,对瑞平塘河流域的氟化物污染状况进行实地调查并开展溯源研究。研究结果显示,2021年氟化物质量浓度超过1.0 mg/L的点位占59.34%,其中超过1.5 mg/L的点位占42.86%,表明大部分河道氟化物质量浓度已经超过水体功能区要求,对生态环境安全构成较大潜在风险。溯源调查结果表明,排除了农业源及矿山源污染的可能,乳胶制品企业排放的废水为瑞平塘河氟化物的污染来源。针对目前该行业的排放标准和环境影响评价均未提及氟化物污染,企业废水处理设施也无除氟工艺单元,缺乏有效的污染防治措施与监管要求等问题。提出,应及时组织开展该区域乳胶制品行业整治提升,增加氟化物处理工艺单元,提升出水水质,确定氟化物排放浓度限值,并对该行业排放标准做进一步研究和完善等建议。     

Toluene removal characteristics by a superimposed wire-plate dielectric barrier discharge plasma reactor

A superimposed wire-plate dielectric barrier discharge reactor was used to remove toluene in this study. The effects of oxygen content, gas flow rate, gas initial concentration and with/without catalyst on toluene decomposition were investigated. It was found that an optimal toluene removal was achieved when the oxygen content was about 5%. Under this condition, the highest toluene removal efficiency of 80.8% was achieved when the gas concentration was 80 mg/m^3. The toluene removal efficiency decreased with the increase of the gas flow rate and the initial concentration of toluene. In addition, the ozone concentration decreased with the increase of the initial concentration of toluene. It suggested that combining DBD （dielectric barrier discharge） with Co3O4/Al2O3/foam nickel catalyst in-situ could improve the toluene removal efficiency and suppress ozone formation. Products analysis showed that the main products were CO and CO2 when oxygen was more than 5%.     

高含CO2天然气运输管道缓蚀剂的筛选

大多数天然气藏CO2含量为10%~98%,CO2在不同的温度、压力条件下腐蚀极其严重。文章主要针对高含CO2天然气运输管道腐蚀的问题,开展缓蚀剂的筛选,重点开展CO2腐蚀规律研究与实验,评价环境温度、CO2分压、流动速度对腐蚀规律的影响,明确缓蚀剂的影响因素,结合管材的材质,优选评价不同类型的缓蚀剂,缓蚀效率分别为90.53%和92.64%,在管道凝液介质的气相及液相中都有较高的缓蚀效率。通过设计现场加药工艺及制度,监测评价缓蚀剂缓释效果和腐蚀情况,可防止管道运输过程中CO2腐蚀的侵害,长输管线内腐蚀控制良好。     

铜的大气腐蚀研究

综述了各种因素对铜大气腐蚀的影响,其中介绍了单一气体SO2、NOx、O3及混合气体协同作用对铜大气腐蚀的影响。在铜腐蚀中,SO2 NO2的协同效应只有在一个相对高的湿度(90%)下才发生。SO2 O3的协同效应要强于SO2 NO2的协同效应,这可以解释为什么铜在富含O3的乡村环境中有高的腐蚀率。重点阐述了硫酸铵微粒的影响,在硫酸铵的临界相对湿度(CRH)时,铜的腐蚀率和机制变化很显著;同时介绍了铜的几种腐蚀产物及其形成机制。简述了研究铜大气腐蚀的常用实验方法和几种表征手段,并展望了铜大气腐蚀的研究趋势。     

峨眉山景区旅游商品的开发与营销模式

通过对旅游商品定义的综述,界定了旅游商品的定义、范围和功能,同时对峨眉山景区旅游商品的开发、需求、购买力等抽取420份问卷作为样本,分析了峨眉山旅游商品的需求现状,并以旅游者需求现状为依据,对峨眉山旅游商品的开发和营销提出了“4P＋4C＋4R”营销策略,以期对其它景区的旅游商品开发和营销具有一定的借鉴意义。     

铬盐废水蒸发系统腐蚀突变与缓蚀工况研究

针对铬盐废水蒸发系统运行过程中的腐蚀问题,采用失重法、pH值检测、扫描电镜(SEM、EDS)和XRD等手段,模拟研究了温度、Cr3+质量浓度对20#碳钢腐蚀速率、腐蚀产物的影响,并从废水pH值和形貌分析角度探索腐蚀速率发生突变的原因.研究表明:废水Cr3+质量浓度在150～180 mg/L范围,碳钢腐蚀速率发生突增,废...     

金属材料海水腐蚀试验方法的编制及标准解读

为了使相关人员更好地理解标准,更好地完成试验,回顾了我国金属材料海水腐蚀试验方法和标准的编制历程,对金属材料海水腐蚀试验的两个现行国家标准进行了解读和比较。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

基于整车道路强化腐蚀试验的工况探讨

试验工况是否科学,可以通过对国内外常用试验方法的工况进行对比,发现其存在的差异性及侧重点,并通过调研对试验工况数据切合度进行验证。只有制定出合理的试验工况,才能为腐蚀数据库提供科学的数据支持。     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.