基于自然保护区属性的管理成本分析

从自然保护区的管理成本构成入手,分析了自然保护区属性对不同尺度上管理成本的影响方式,在分类总结自然保护区管理成本的分析方法基础上,提出基于自然保护区属性的管理成本分析流程。该研究结果可为准确掌握自然保护区管理成本规模与构成、科学评估与预测资金投入后的使用效率与保护效果提供支持,并可为揭示自然保护区复合生态系统格局与过程提供新思路。     

Use of linkage mapping and centrality analysis across habitat gradients to conserve connectivity of gray wolf populations in western North America

Centrality metrics evaluate paths between all possible pairwise combinations of sites on a landscape to rank the contribution of each site to facilitating ecological flows across the network of sites. Computational advances now allow application of centrality metrics to landscapes represented as continuous gradients of habitat quality. This avoids the binary classification of landscapes into patch and matrix required by patch-based graph analyses of connectivity. It also avoids the focus on delineating paths between individual pairs of core areas characteristic of most corridor- or linkage-mapping methods of connectivity analysis. Conservation of regional habitat connectivity has the potential to facilitate recovery of the gray wolf (Canis lupus), a species currently recolonizing portions of its historic range in the western United States. We applied 3 contrasting linkage-mapping methods (shortest path, current flow, and minimum-cost-maximum-flow) to spatial data representing wolf habitat to analyze connectivity between wolf populations in central Idaho and Yellowstone National Park (Wyoming). We then applied 3 analogous betweenness centrality metrics to analyze connectivity of wolf habitat throughout the northwestern United States and southwestern Canada to determine where it might be possible to facilitate range expansion and interpopulation dispersal. We developed software to facilitate application of centrality metrics. Shortest-path betweenness centrality identified a minimal network of linkages analogous to those identified by least-cost-path corridor mapping. Current flow and minimum-cost-maximum-flow betweenness centrality identified diffuse networks that included alternative linkages, which will allow greater flexibility in planning. Minimum-cost-maximum-flow betweenness centrality, by integrating both land cost and habitat capacity, allows connectivity to be considered within planning processes that seek to maximize species protection at minimum cost. Centrality analysis is relevant to conservation and landscape genetics at a range of spatial extents, but it may be most broadly applicable within single- and multispecies planning efforts to conserve regional habitat connectivity.     

定费用时尿素热解脱硝系统的可靠性研究

针对费用最小化理论在可靠性分配中的局限性,建立更切合实际的固定费用下可靠度极大化思想。将该思想运用到尿素热解脱硝系统中,针对系统结构功能特征及运行特点,深入分析各系统间逻辑功能关系,提出了完整的尿素热解脱硝系统可靠性分配模型。并引入可靠性成本预估函数,以固定费用为约束,建立数学模型,实现了系统可靠性指标的最优化分配。最后以脱硝系统为例,获得具有实际意义的数值解,证明了该方法的可用性及正确性。     

低成本废水生态处理组合工艺在农家乐废水治理中的应用

以一典型农家乐生活废水为处理对象,采用以低成本废水生态处理技术为主体的组合处理工艺,研究了该工艺对农家乐废水的处理效果。结果表明:该废水处理系统稳定运行时对COD和NH4+-N的平均去除率分别达80%和50%以上,出水ρ(TP)一直保持在2.0 mg/L以下。该废水处理技术不仅简单易行、效果好,而且建造及运行成本低,在农村分散型废水治理方面具有良好的推广应用价值。     

排污权交易市场中具有激励相容性的双边拍卖机制

针对排污权交易市场的交易机制设计问题,描述了多个排污权出售方和购买方治污量和产量的最优决策问题,基于单边拍卖的缺点,设计出了一个激励相容的双边拍卖机制.结果表明,此机制在描述排污权交易市场竞价规则的基础上,设计出了符合排污权市场特点的出清和交易规则,不仅能保证排污权交易市场实时出清,使理性的企业披露自己真实的治污成本,而且能够使污染物平均处理成本低的企业承担更多的处理量,达到了社会治污成本最小化.最后通过算例验证了该机制的有效性和实用性.     

再生造纸废水低成本治理工艺优化及应用

通过对国内外再生造纸废水处理工艺的归纳与总结,结合再生造纸的工艺特点,提出再生造纸废水低成本治理工艺。采用锅炉烟气处理脱墨黑夜,漂白废水用于废水脱色,采用絮凝沉淀、过滤等物化+生化处理相结合的方法处理综合废水。实现废水多级回用,循环水使用率达80%～90%,少量废水达标排放,投资和运行费用可节省近50%。     

Emergy analysis applied to the estimation of the recovery of costs for water services under the European Water Framework Directive

In this paper, the European Union's Water Framework Directive 2000/60/EC (WFD) that is intended to foster protection of water resources is examined, focusing on the improvement of ecological and chemical quality of surface and groundwater. The WFD includes the concept of full cost recovery (FCR) in accordance with the Polluter-Pays Principle, as one of the tools of an adequate and sustainable water resource management system. The WFD defines three different costs associated with water: resource costs (RC), financial costs (FC), and environmental costs (ECs).The FCR of water is examined from a biophysical perspective using emergy evaluation to: (1) establish resource values of water from different sources, (2) establish the full economic costs associated with supplying water, and (3) the societal costs of water that is used incorrectly; from which the resource costs, financial costs, and environmental costs, respectively, can be computed. Financial costs are the costs associated with providing water including energy, materials, labor and infrastructure. The emergy based monetary values vary between 0.15 and 1.73 €/m³ depending on technology. The emergy based, global average resource value (from which resource costs can be computed) is derived from two aspects of water: its chemical potential and its geopotential. The chemical potential monetary value of different sources such as rain, groundwater, and surface water derived from global averages of emergy inputs varies from 0.03 to 0.18 €/m³, depending on source, and the geopotential values vary from 0.03 to 2.40 €/m³, depending on location in the watershed. The environmental costs of water were averaged for the county of Spain and were 1.42 €/m³.Time of year and spatial location within the watershed ultimately influence the resource costs (computed from emergy value of chemical potential and geopotential energy) of water. To demonstrate this spatial and temporal variability, a case study is presented using the Foix watershed in northeastern Spain. Throughout the year, the resource value of water varies from 0.21 to 3.17 €/m³, depending on location within the watershed. It is concluded that FCR would benefit from the evaluation of resource costs using spatially and temporally explicit emergy accounting.     

有机肥与化肥的生产能耗、投入成本和环境效益比较分析——以污泥堆肥生产有机肥为例

针对目前国内肥料生产和施用现状,分别从能耗、成本和污染物排放等三个方面对有机肥和化肥进行比较分析。化肥生产呈现高能耗和高污染排放,而有机肥则表现为低能耗、无污染的特点,同时还可消纳废弃物,减轻污染负荷。从投入成本上分析,化肥相对于有机肥具有一定优势,其单位面积和折纯养分投入分别是有机肥的53%和26%。有机肥相对于化肥,其污染物排放负荷很低。从节能减排和降低投入的角度,提出支持基于废弃物资源化的有机肥产业化发展。     

Clean Water State Revolving Fund Loans and Landowner Investments in Agricultural Best Management Practices in Iowa1

Arbuckle, Jr., J. Gordon, 2012. Clean Water State Revolving Fund Loans and Landowner Investments in Agricultural Best Management Practices in Iowa. Journal of the American Water Resources Association (JAWRA) 1‐9. DOI: 10.1111/j.1752‐1688.2012.00688.x Abstract: Clean Water State Revolving Fund (CWSRF) loan programs for water quality have traditionally funded infrastructure projects at the community, municipality, or state level. They are increasingly being used to support individual landowner adoption of agricultural best management practices (BMPs) for nonpoint source pollution abatement. In 2005, the Iowa CWSRF initiated the Local Water Protection Program (LWPP) to increase the scope, scale, and rate of agricultural BMP establishment. This research examines the effectiveness of that program through a comparison of survey data from LWPP participants and state cost‐share recipients who were eligible for loans, but did not take them. Loan recipients’ assessments of the program were overwhelmingly positive, with near‐universal satisfaction with both the loan product and process. Results of statistical analyses indicate that loan recipients invested substantially more in conservation than nonrecipients. Evidence suggests that by helping program participants to overcome financial constraints, loans are facilitating larger and accelerated investments in conservation. Although findings indicate that conservation loans can play an important role in funding conservation, loan recipients also still depend on cost‐share. Loans are not necessarily a substitute for traditional forms of conservation funding, but rather another tool that landowners and conservation professionals can employ to facilitate investments in BMPs.     

Multiobjective optimisation method for life-cycle design of mechanical products

Manufacturing that minimises the exhaustion of natural resources, energy used and deleterious environmental impact is increasingly demanded by societies that seek to protect global environments as much as possible. To achieve this, life-cycle design (LCD) is an essential component of product design scenarios; however, LCD approaches have not been well integrated in optimal design methods that support quantitative decision-making. This study presents a method that yields quantitative solutions through optimisation analysis of a basic product design incorporating life-cycle considerations. We consider two types of optimisation approaches that have different aims, namely, (1) to reduce the use of raw materials and energy consumption and (2) to facilitate the reuse of the product or its parts when it reaches the end of its useful life. We also focus on how the optimisation results differ according to the approach used, from the viewpoint of the 3R concept (Reduce, Reuse and Recycling). Our method obtains optimum solutions by evaluating objectives fitted to each of these two optimisation approaches with respect to the product's life-cycle stages, which are manufacturing, use, maintenance, disposal, reuse and recycling. As an applied example, a simple linear robot model is presented, and Pareto optimum solutions are obtained for the multiobjective optimisation problem whose evaluated objectives are the operating accuracy of the robot and the different life-cycle costs for the two approaches. The characteristics of the evaluated objectives and design variables, as well as the effects of using material characteristics as design parameters, are also examined.