顶空-气相色谱法(氮磷检测器)测定固定污染源废气中三甲胺

建立了顶空-气相色谱法测定固定污染源废气中三甲胺的分析方法。弱酸性吸收液采集固定污染源废气中的三甲胺,碱液中和后顶空进样气相色谱仪氮磷检测器分析。并对平衡温度、平衡时间、盐析效应、氨水和氢氧化钠条件实验进行优化,在最佳实验条件下,三甲胺的方法检出限为0. 46μg/m~3(以采集20 L空气样品计),加标回收率为97%～107%,相对标准偏差在9. 26%以下。利用该方法对垃圾焚烧发电厂厂界空气及鱼粉厂有组织废气中三甲胺进行检测分析,该方法能够满足国家标准及上海地方标准中三甲胺排放限值的要求。     

上海城区交通干道黑碳污染调查

采用设置在上海市中心城区交通主干道旁空气质量自动监测站2018年1—12月的观测数据,分析黑碳气溶胶(BC)污染特征及其与PM_(2.5)、SO_2、NO_x、CO、O_3、苯、甲苯、乙苯、二甲苯和气象参数的相关性。结果表明,观测期间内,BC小时均值为(3 038±22) ng/m~3,ρ(BC)在ρ(PM_(2. 5))中占比为(11. 48±0. 12)%。日内ρ(BC)变化呈双峰型,各月份之间ρ(BC)变化不大。ρ(BC)与风速呈负相关,与PM_(2. 5)、NO_x、CO、苯、甲苯、乙苯和二甲苯呈正相关。     

Carbon emission reduction and cost–benefit of methane digester systems on hog farms in China

Three different sizes of hog farms were selected to analyze the carbon emissions reduction and the cost–benefit of three methane digester systems. The sizes of the digesters are 2,200, 2,200 and 800 m³, respectively. The sales of slaughter hogs from them are 50,000, 35,000 and 10,000 head, respectively. The carbon emissions reductions were 5,237, 4,017, and 1,334 tons, respectively. The results show that while the methane digester systems have a significant effect on carbon emissions reduction, it is difficult to operate the systems sustainably. If the carbon emissions reduction can be traded at high enough prices in the carbon offset markets, then the systems will be profitable and sustainable. Newly established China's domestic carbon offset market could provide this possibility, but more government support is needed. In addition, this study shows that scale economies make the digester adoption relatively more profitable for larger farms than smaller ones.     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

焊点热疲劳失效原因分析

某PCBA样品在使用约半年后出现功能失效,该PCBA在封装后进行整体灌胶,将失效样品剥离,发现部分器件直接脱落,通过表面观察、切片分析、EBSD分析、应力分析、热膨胀系数测试等手段对样品进行分析,结果表明:各封装材料存在热失配,且焊点缺陷较多且存在应力集中区,加速焊点的疲劳失效进程,导致PCBA功能失效。     

The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Depoliticizing adaptation: a critical analysis of EU climate adaptation policy

The ways in which climate adaptation is understood in the European Union is examined via three key policy documents: the Strategy on adaptation and the Green and White Papers that preceded it. Drawing on Poststructuralist Discourse Theory, light is shed on the implicit values and assumptions that underpin this recent policy initiative. The findings demonstrate a tension between the declared ambition to act on adaptation and implicit suggestions that nothing really has to change, and the challenge can be addressed by market and technological innovations, and by mainstreaming adaptation into existing sectoral policies. The policy discourse effectively serves to depoliticize choices societies make in response to climate change, presenting adaptation as a non-political issue. Insight into European adaptation discourse enables deeper understanding of recent policy developments and opens up possible entry points for critique.     

Coupling of the Water Cycle with Patterns of Urban Growth in the Baltimore Metropolitan Region,United States

Regional municipal water plans typically do not recognize complex coupling patterns or that increased withdrawals in one location can result in changes in water availability in others. We investigated the interaction between urban growth and water availability in the Baltimore metropolitan region where urban growth has occurred beyond the reaches of municipal water systems into areas that rely on wells in low‐productivity Piedmont aquifers. We used the urban growth model SLEUTH and the hydrologic model ParFlow.CLM to evaluate this interaction with urban growth scenarios in 2007 and 2030. We found decreasing groundwater availability outside of the municipal water service area. Within the municipal service area we found zones of increasing storage resulting from increased urban growth, where reduced vegetation cover dominated the effect of urbanization on the hydrologic cycle. We also found areas of decreasing storage, where expanding impervious surfaces played a larger role. Although the magnitude of urban growth and change in water availability for the simulation period were generally small, there was considerable spatial heterogeneity of changes in subsurface storage. This suggests that there are locally concentrated areas of groundwater sensitivity to urban growth where water shortages could occur or where drying up of headwater streams would be more likely. The simulation approach presented here could be used to identify early warning indicators of future risk.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.