旋风分离器内高速旋转流场的数值计算方法选择

数值计算方法已成为研究旋风分离器内部流场的重要途径。利用计算流体力学方法对旋风分离器内部气相流场进行了数值模拟研究。分析了不同湍流模型、离散化方式和压力插值方式对旋风分离器内部计算流场的影响,并将所得数值结果与已知的实验数据进行了对比,以期得到最适合的数值模型。结果表明:对于旋风分离器内部复杂流场的流动,运用雷诺应力模型(Low-Re Stress-Omega)能够较好地预测出强制涡中心涡流的运动情况,同时采用SIMPLEC算法、二阶迎风离散化方式和PRESTO压力梯度插补格式能够获得最好的预报结果。     

热带气旋影响下的电网应急案例框架构建研究

在我国电网防灾抗灾体系中,因风灾等自然灾害影响具有持续性,造成应急准备阶段对灾害演变过程认知不足而引发响应阶段抢修故障。热带气旋是导致电网破坏严重的自然灾害之一,近些年发生率高于以往同期。风灾是阶段变化的,情景又是动态演变的。针对热带气旋的影响,考虑其不同影响阶段构建应急案例,可在应急响应行动过程,有效准确的面对风灾特性而带来的抢修故障。提出电网风灾的案例框架构建方法,并结合风灾的特点进行框架分类,可有效应对灾害的不确定性从而增加案例可用度。同时对风灾案例库建设、抗台演习演练与实际应对三种目的下的案例进行属性约简,依热带气旋演变,将案例个体拆分化采取逐步多次检索生成可行预案,从而提高响应效率。     

旋风除尘器筒体倾斜角的仿真与优化

旋风除尘器结构简单、造价低廉、能耗极低,故得以长期应用,但其除尘效率因设计方法比较粗糙一般在60%以下,从而限制了其使用范围。很多结构参数均影响除尘器的效率,其中除尘器筒体的倾斜角度对效率的影响程度最高。以有限元理论为基础,以Fluent软件为工具,对关于除尘效率与倾斜角度依赖关系进行了系列仿真和优化,得出结论:若空气中颗粒物直径大于2.5μm,除尘器倾斜角为12.4°时,其除尘效率理论上可达到97%以上。通过实验初步验证了上述结果的可信度。     

旋流气浮工艺接触区气泡-颗粒碰撞理论研究

为了对旋流气浮过程中的动力学行为和气浮分离效率进行准确预测,在借鉴重力场下气泡-颗粒碰撞模型建立方法的基础上,考虑旋流气浮的特点,首次将表征流态的雷诺数引入到各种碰撞过程中,推导建立了旋流气浮接触区的气泡-颗粒碰撞效率模型.理论模型显示:低强度旋流气浮工艺中气泡-颗粒的各种碰撞效应主要与雷诺数、气泡和颗粒直径有关.当颗粒直径接近于分子直径时,即直径为1nm时,碰撞主要受扩散碰撞所控制;当颗粒在1~10nm之间时,碰撞主要受扩散碰撞和离心沉降效应的共同作用所控制;当颗粒在10nm~1μm时,碰撞主要受离心沉降效应所控制;当颗粒大于1μm时,碰撞将受截留效应、离心沉降效应和惯性效应联合作用.该模型能够准确预测旋流气浮过程中的动力学行为和分离效率,为旋流气浮工艺的实际应用提供一定的理论依据.     

台风过程珠江三角洲边界层特征及其对空气质量的影响

利用2006年7月珠江三角洲南北向3个点为期1个月的小球测风、低空探空资料及9个地面气象站逐时风向、风速资料,通过计算和分析风、温梯度资料,研究了台风过程珠江三角洲边界层特征及其对珠江三角洲地区空气质量的影响,重点分析了台风下沉气流影响导致灰霾天气期间的边界层结构.结果表明,2006年7月珠江三角洲地区空气质量主要受2个台风过程影响,当台风中心位于粤东及福建以东海域时,台风外围的下沉气流会对珠江三角洲地区的空气质量产生强烈影响,出现灰霾天气.在台风登陆前出现灰霾日时,珠江三角洲被均压场所控制,大部分区域为静小风,沿海地区会出现局地的海陆风,边界层风速较小.在200~500m低空会出现逆温层,同时最大混合层高度迅速下降到不足500m.     

某油田稠油采出液生产分离器机械消泡技术研究

目的 针对某油田进行机械消泡技术研究,进而为促进分离器内稠油的快速消泡提供解决办法.方法 利用Fluent软件模拟不同导流板参数下分离器中气液分离效果及泡沫变化情况,并采用动态解析法发泡方式,利用高压溶气消泡测试系统对不同类型和型号的金属规整填料和两种化学消泡剂,进行消泡测试以及组合消泡实验.结果 导流板放置角度为45°时,分离效率和泡沫聚并效果均较好,而导流板放置距离影响不大;随着消泡填料的高度增加,消泡效果随之增加.结论 分离器入口导流板最佳放置角度为45°,孔板波纹填料SM250*12 cm为优选的机械消泡构件.实际生产采用机械消泡方法即可满足消泡需求,要求更好的消泡效果时,可将机械消泡与化学消泡剂消泡两种方式结合使用.     

Cyclone preparedness and response: an analysis of lessons identified using an adapted military planning framework

The United Kingdom uses the Defence Lines of Development (DLOD) framework to analyse and understand the key components and costs of a military capability. Rooted in the Resource Based View (RBV) of a firm, an adapted DLOD approach is employed to explore, analyse and discuss the preparedness, planning and response strategies of two markedly different countries (Australia and Bangladesh) when faced with a major cyclone event of a comparable size. Given the numerous similarities in the challenges facing military forces in a complex emergency and humanitarian agencies in a natural disaster, the paper demonstrates the applicability of the DLOD framework as an analysis and planning tool in the cyclone preparedness planning and response phases, and more broadly within the disaster management area. In addition, the paper highlights the benefit to disaster managers, policymakers and researchers of exploiting comparative cross-learning opportunities from disaster events, drawn from different sectors and countries.     

旋风分离器压力损失的数学模型及在设计中的应用

从理论上分析了旋风分离器压力损失的成因及影响因素,建立了旋风分离器压力损失的数学模型,解决了旋风分离器设计过程中压力损失的计算问题,将模型应用于实际工业型旋风分离器的设计得到的实际压力损失与数学模型的计算结果吻合良好。数学模型对旋风分离器的设计有较大的参考价值。     

A preliminary study on mortality attributed to tropical cyclones in Taiwan 2000–2014

Studies on mortality attributed to tropical cyclones often concern large-scale disasters. Attention is rarely paid to small-scale mortality over the long term. To understand the relationship between the environment and the behavior that contributes to mortality, this article uses a classification table to review the 1556 deaths attributed to tropical cyclones, named typhoons, in Taiwan during the period 2000–2014. The results demonstrate that the majority of outdoor deaths are associated with work-related activities, while most indoor deaths occur during non-work-related activities. Taking action, such as stopping the car on a bridge if the tail lights of a vehicle in front disappear, and not walking on the roadside when the road is flooded by muddy water, may help to reduce the likelihood of typhoon-attributed death. The findings also help to dispel four myths associated with typhoon-attributed mortality.     

Using crosslinked polyvinyl alcohol polymer membrane as a separator in the microbial fuel cell

Separator between anode and cathode is an essential part of the microbial fuel cell （MFC） and its property could significantly influence the system perfor- mance. In this study we used polyvinyl alcohol （PVA） polymer membrane crosslinked with sulfosuccinic acid （SSA） as a new separator for the MFC. The highest power density of 7594-4 mW-m-2 was obtained when MFC using the PVA membrane crosslinked with 15% of SSA due to its desirable proton conductivity （5.16 x 10-2 S.cml）. The power density significantly increased to 11064- 30 mW.m-2 with a separator-electrode-assembly config- uration, which was comparable with glass fiber （11704- 46 mW.m-2）. The coulombic efficiencies of the MFCs with crosslinked PVA membranes ranged from 36.3% to 45.7% at a fix external resistance of lO00f2. The crosslinked PVA membrane could be a promising alter- native to separator materials for constructing practical MFC system.