云母钛珠光颜料的应用研究

介绍了一种不使用有机溶剂获得云母钛珠光颜料、水性金属效果云母钛珠光浆、珠光涂料的环保型制备工艺和性能.采用液相沉积法获得了不同厚度的纳米TiO2薄膜包覆层而显示银白、金、红、紫、蓝、绿等各种色彩的系列珠光云母颜料;应用珠光云母颜料与分散剂等水性助剂混合,获得了水性金属效果云母钛珠光浆的制备工艺;应用云母钛珠光浆与乳液配合,获得了云母钛珠光涂料的制备工艺.制备的云母钛珠光涂料系列多彩,白度高、反射率大、珠光效果好,硬度、附着力、耐候性等指标优异.     

铅芯橡胶支座等效线性分析模型参数的研究

针对目前铅芯橡胶支座等效线性分析模型动力参数选取不够合理的现状 ,笔者通过对铅芯橡胶支座水平动态试验分析 ,系统研究了铅芯橡胶支座等效线性分析模型参数与其几何结构及外加动力荷载特性的关系。研究结果表明 :铅芯橡胶支座等效线性分析模型参数 (水平耗能、等效刚度及等效阻尼比 )主要由其本身的几何构造及组成材料决定 ,且在往复加、卸载循环过程中具有较好的稳定性。笔者对试验数据进行数学统计分析 ,归纳出一些经验公式 ,为其等效线性化动力分析模型参数的合理选取提供了计算方法 ,从而提高其动力分析结果的安全性。     

煤矿轴流式局部通风机的降噪试验研究

煤矿局部通风机（简称“局扇”）的噪声是煤矿掘进中的主要噪声源，分析了局扇噪声的产生机理，提出了减少局扇的动叶叶顶与机壳间隙，在局扇入口加阻性消声器和在机壳涂上一层阻尼材料等方法来控制局扇的噪声方法，方法在JBT52－2型局扇的试验研究表明，实施上海降噪措施，局扇的噪声有大幅度降低，可使局扇的噪声达到工矿企业噪声卫生标准要求。     

强震仪观测资料在杨浦大桥养护监测中的运用

上海杨浦大桥是当时世界同类型桥梁中最长的斜拉索桥,为了掌握大桥的运行情况,确保运行安全,每年用在该桥上的养护管理费用相当可观,且程序繁琐。如何找到既简单实用,又节约费用,就能起到一定的养护监测作用的方法?是本文探讨的问题。本文运用强震观测资料,采用自回归移动平均ARMA模型,得到大桥的随机振动中某些振型的频率及阻尼比,在地震、台风过后或经一长段时间车辆运行之后,看其相应振型频率和阻尼比的变化,以达到维护监测的目的。从所得的结果看,此法具有较好的可操作性,可用于大桥主塔等的养护。     

Water vapor permeability of biodegradable polymers

The water vapor transmission rates (WVTR) of several biodegradable polymers were evaluated to determine their suitability as water-resistant coatings and to understand WVTR better in terms of polymer structure. Values of WVTR at 25‡C ranged from 13 to 2900 g/m² /day and increased in the order PHBV PLA (cryst.) PLA (amorph.) PCL Bionolle BAK 1095 CAP CA. Values of WVTR were positively correlated with higher polymer solubility parameters, lower crystallinities, and higher free volumes. Although the WVTR of biodegradable polymers are much higher than those of good barrier materials such as low-density polyethylene, they are sufficient for short-term (hours to days) protection of polysaccharide-based materials against water. Product names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

ZJR型涂料的制备及特性研究

利用溶胶凝胶法制备TiO2光催化剂,使用磷酸氢二钠、十水合四硼酸钠和氢氧化镁等制备了阻燃体系料,复合后制成ZJR涂料。利用热分析仪分析纳米TiO2和阻燃体系复合的防火涂料的温度与热失率关系,并得到热重与微商热重曲线。550~650℃之间,失重率约为11%,ZJR涂料在400~600℃有较好的阻燃效果。该涂料对污染气体的光催化降解研究结果表明:光照60 m in后,对二氧化硫的降解率为90.40%,紫外光照40 m in后,甲醛气体降解率为68.98%。进一步添加聚乙二醇和银离子使涂料改性,使涂料光催化甲醛的活性分别提高了11%和14%,效果显著。     

军绿有机涂层和金属漆涂层全浸泡下的腐蚀行为对比研究

目的针对车辆装备长期在高盐雾、高湿热、高日照等恶劣的气候环境下使用,会受到腐蚀影响的现状,探究现役军用有机涂层防护性能。方法采用电化学阻抗谱技术研究军绿有机涂层和金属漆涂层在3.5%NaCl溶液中的腐蚀电化学行为,分析这两种涂层在浸泡期间的电化学阻抗谱特征,通过拟合等效电路得到涂层电阻R_c和涂层电容C_c,并用这两个电化学参数评价军绿有机涂层和金属漆涂层的耐蚀性能。结果军绿有机涂层抗腐蚀介质渗透能力很强,而金属漆涂层抗腐蚀介质渗透能力稍弱。结论两种涂层都表现出很好的防护性能,且金属漆涂层在腐蚀后期的防护性能要优于军绿有机涂层。     

军绿有机涂层破损腐蚀行为研究

目的研究不同破损程度下军绿有机涂层的腐蚀行为,确定破损率对其防护性能变化的影响。方法通过人工制作不同的破损率,并利用电化学阻抗谱技术,研究不同破损程度下军绿有机涂层的电化学特征。结果根据不同破损程度下的军绿有机涂层的电化学特征,确定了涂层从完好到失效的四个阶段,初始完好阶段(破损率K≤0.0004%)、破损增大阶段(0.0016%K≤0.04%)、破损过大阶段(0.16%K≤1%)和失效阶段(4%K≤16%)。结论破损率K为0.04%的点是该涂层防护性能急转直下的转折点,因此破损率K大于0.04%时,应及时对车辆表面涂层进行修补和防护。     

多层阻尼复合板常温贮存5年性能研究

目的分析多层阻尼复合板常温贮存5年的性能变化。方法对多层阻尼复合板进行常温下贮存5年的减振性能研究,通过贮存前后的正弦扫描试验和随机振动试验,获得贮存前后多层阻尼复合板的减振性能和模态变化,进行对比分析。结果阻尼复合板常温贮存5年后,径向模态有较大的下降,法向模态变化较少,组件上的加速度响应基本无变化。结论该多层阻尼复合板常温贮存5年后仍然满足要求。     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.