An Assessment of Stakeholder Perceptions and Management of Noxious Alien Plants in Spain

Despite biological invasions being a worldwide phenomenon causing significant ecological, economic, and human welfare impacts, there is limited understanding regarding how environmental managers perceive the problem and subsequently manage alien species. Spanish environmental managers were surveyed using questionnaires to (1) analyze the extent to which they perceive plant invasions as a problem; (2) identify the status, occurrence, and impacts of noxious alien plant species; (3) assess current effort and expenditure targeting alien plant management; and, finally, (4) identify the criteria they use to set priorities for management. In comparison to other environmental concerns, plant invasions are perceived as only moderately problematic and mechanical control is the most valued and frequently used strategy to cope with plant invasions in Spain. Based on 70 questionnaires received, 193 species are considered noxious, 109 of which have been the subject of management activities. More than 90% of species are found in at least one protected area. According to respondents, the most frequently managed species are the most widespread across administrative regions and the ones perceived as causing the highest impacts. The perception of impact seems to be independent of their invasion status, since only half of the species identified as noxious are believed to be invasive in Spain, while 43% of species thought to only be casual aliens are causing a high impact. Records of management costs are poor and the few data indicate that the total actual expenditure amounted to 50,492,437 € in the last decade. The majority of respondents stated that management measures are insufficient to control alien plants due to limited economic resources, lack of public awareness and support, and an absence of coordination among different public administrations. Managers also expressed their concern about the fact that much scientific research is concerned with the ecology of alien plants rather than with specific cost-efficient strategies to manage alien species.     

Long-range atmospheric transport of three toxaphene congeners across Europe. Modeling by chained single-box FATEMOD program

Background, aims, and scope  Since toxaphene (polychlorocamphene, polychloropinene, or strobane) mixtures were applied for massive insecticide use in the 1960s to replace the use of DDT, some of their congeners have been found at high latitudes far away from the usage areas. Especially polychlorinated bornanes have demonstrated dominating congeners transported by air up to the Arctic areas. Environmental fate modeling has been applied to monitor this phenomenon using parallel zones of atmosphere around the globe as interconnected environments. These zones, shown in many meteorological maps, however, may not be the best way to configure atmospheric transport in air trajectories. The latter could also be covered by connecting a chain of simple model boxes. We aim to study this alternative approach by modeling the trajectory chain using catchment boxes of our FATEMOD model. Polychlorobornanes analyzed in biota of the Barents Sea offered one case to study this modeling alternative, while toxaphene has been and partly still is used massively at southern East Europe and around rivers flowing to the Aral Sea. Materials and methods  Pure model substances of three polychlorobornanes (toxaphene congeners P26, P50, and P62) were synthesized, their environmentally important thermal properties measured by differential scanning calorimetry, as evaluated from literature data, and their temperature dependences estimated by the QSPR programs VPLEST, WATSOLU, and TDLKOW. The evaluated property parameters were used to model their atmospheric long-range transport from toxaphene heavy usage areas in Ukraine and Aral/SyrDarja/AmuDarja region areas, through East Europe and Northern Norway (Finnmarken) to the Barents Sea. The time period used for the emission model was June 1997. Usual weather conditions in June were applied in the model, which was constructed by chaining FATEMOD model boxes of the catchment’s areas along assumed maximal air flow trajectories. Analysis of the three chlorobornanes in toxaphene mixtures function as a basis for the estimates of emission levels caused by its usage. High estimate (A) was taken from contents in a Western product chlorocamphene and low estimate (B) from mean contents in Russian polychloroterpene products to achieve modeled water concentrations. Bioaccumulation to analyzed lipid of aquatic biota at the target region was estimated by using statistical calculation for persistent organic pollutants in literature. Results  The results from model runs A and B (high and low emission estimate) for levels in sea biota were compared to analysis results of samples taken in August 1997 at Barents Sea. The model results (ng g⁻¹ lw): 4–95 in lipid of planktovores and 7–150 in lipid of piscivores, were in fair agreement with the analysis results from August 1997: 21–31 in Themisto libellula (chatka), 26–42 in Boreocadus saida (Polar cod), and 5–27 in Gadus morhua (cod) liver. Discussion  The modeling results indicate that the application of chained simple multimedia catchment boxes on predicted trajectory is a useful method for estimation of volatile airborne persistent chemical exposures to biota in remote areas. For hazard assessment of these pollutants, their properties, especially temperature dependences, must be estimated by a reasonable accuracy. That can be achieved by using measurements in laboratory with pure model compounds and estimation of properties by thermodynamic QSPR methods. The property parameters can be validated by comparing their values at an environmental temperature range with measured or QSPR-estimated values derived by independent methods. The chained box method used for long-range air transport modeling can be more suitable than global parallel zones modeling used earlier, provided that the main airflow trajectories and properties of transported pollutants are predictable enough. Conclusions  Long-range air transport modeling of persistent, especially photo-resistant organic compounds using a chain of joint simple boxes of catchment’s environments is a feasible method to predict concentrations of pollutants at the target area. This is justified from model results compared with analytical measurements in Barents Sea biota in August 1997: three of six modeled values were high and the other three low compared to the analysis results. The order of magnitude level was similar in both modeled (planktovore and piscivore) and observed (chatka and polar cod) values of lipid samples. The obtained results were too limited to firm validation but are sufficient to justify feasibility of the method, which prompts one to perform more studies on this modeling system. Recommendations and perspectives  For assessment of the risk of environmental damages, chemical fate determination is an essential tool for chemical control, e.g., for EU following the REACH rules. The present conclusion of applicability of the chained single-box multimedia modeling can be validated by further studies using analyses of emissions and target biota in various other cases. To achieve useful results, fate models built with databases having automatic steps for most calculations and outputs accessible to all chemical control professionals are essential. Our FATEMOD program catchments at environments and compound properties listed in the database represent a feasible tool for local, regional, and, according our present test results, for global exposure predictions. As an extended use of model, emission estimates can be achieved by reversed modeling from analysis results of samples corresponding to the target area. This article is dedicated to the memory of Professor Alexander B Terentiev (who passed away in November 2006), our true friend. With his Institute of Organo-Element Compounds, Russian Academy of Science, Moscow, he was an important main organizer of the six joint Finnish–Russian seminars (every third year since 1989) on the field (‘Chemistry and Ecology of Organo-Element Compounds’). He prompted us especially to search properties and environmental fates for various polyhalogen compounds. We remember him for his friendly character and great sense of humor.     

Postfire succession in a forest of the cryolithozone: The example of central Yakutia

The results of studies on postfire succession in larch forests of the permafrost zone are discussed. The main directions of successional processes in burned-out areas of different ages are described. It has been shown that secondary pyrogenic successions in larch forests follow the scheme of rapid regeneration without tree species replacement and the model of succession tolerance. Groups of plant species with different life strategies and indicator species characterizing different stages of the overgrowing of burned-out areas have been identified.     

风险管理在水电工程中的应用

水电工程是一个在建设过程中充满风险的、相当复杂的系统工程,其风险管理伴随着工程建设的全过程.随着我国水电工程建设体制改革的进一步深化,风险管理越来越受到工程界的重视.分析了在水电工程中存在的主要危险有害因素,提出了具体的风险管理和评价方法,并对一些主要的评价方法进行了大致的比较,同时对水电工程的风险管理工作提出了一些改进措施.     

我国危险化学品事故统计分析及对策研究

基于2005—2008年我国发生的1565起危险化学品事故,从事故发生时间、发生地点、发生环节等方面分析事故的致因、特点以及规律,可以发现:近3年来我国危险化学品事故呈逐渐下降趋势;石化产业大省是危险化学品事故高发省份;每年3—8月是危险化学品事故高发时期;每天上午10点和下午3点是危险化学品事故高发时间;生产、运输、储存是危险化学品产业链六大环节中的事故高发环节。根据统计结果分析,指出我国危险化学品安全管理存在的问题,并提出预防和减少危险化学品事故的对策。     

关于“四沿”化工安全的战略性思考与探索

以基本能浓缩中国化工概貌的江苏省沿江、沿河、沿湖、沿海化工企业为背景,依据其形成和发展及基本概况,结合重大化工事故灾难,以安全与环境相耦合,对"四沿"化工安全进行了战略性思考,试图勾画临水化工本质安全的模型,提出在"四沿"地区构建化工本质安全化科技支撑体系的宏观构架,即建设"江苏省四沿区域化工本质安全和化工事故防范及应急系统"的思路、探索与实践。还提出了立法深化研究和技术标准制定、严格区域规划设计与建设的监督、强化监管执法力度等急需关注的问题。以江苏省"四沿"区域的化工安全为背景所提出的思路与对策,应该对整个华东地区乃至全国临水性化工企业安全具有重要的现实和借鉴意义,对我国高危行业的安全生产和环境保护有重大的示范效应。     

江苏省危险化学品生产状况调查分析及监管对策

根据《危险化学品名录》,分析江苏省取得危险化学品安全生产许可证的1774家企业的化学品种类、数量、生产企业类型分布情况.结果表明,江苏省危险化学品生产企业在地域分布上苏南多于苏北;化工、建材行业的危险化学品生产企业所占比例较高;危险化学品涉及除爆炸品外的6大类,达3 790种,以生产易燃液体的企业数目为最多;有31家企业生产10种以上危险化学品.笔者建议,通过评估摸清企业安全生产状况,严格控制危险化学品企业安全生产许可证发放,实现危险化学品运输企业的动态管理,建立安全监测预警技术平台.     

基岩区断裂活动习性研究方法初探——以殷家汇-葛公镇断裂研究为例

对安徽省殷家汇葛公镇断裂旁侧方解石脉进行了野外考察和显微观测。露头上可识别出多期变形事件 ,显微镜下也能鉴别出脉的不同期次的变形特征和变形强度 ,脉的变形强度表现为从早期到晚期 ,脉的变形形态和组构从复杂趋于简单 ,方解石机械双晶从多组、弯曲趋于单组、平直。压性或压剪性脉体变形以交错揉皱为其主要特征 ,而张性、张剪性脉体则多表现为破裂、砾化等脆性变形形态。殷家汇葛公镇断裂宏观和微观系统分析研究为基岩区断裂活动期次及各期变形特征的鉴别研究提供了一个实例。     

近岸海域水质自动监测系统站位的布设

水质自动监测将是近岸海域环境监测的一个发展趋势。通过分析现有近岸海域自动监测站在站点布设过程中的经验,对近岸海域自动监测系统站位的设置原则、技术要求、基本条件及注意事项等进行阐述,为后续近岸海域自动监测系统的建设提供参考依据。     

黄、渤海滨海带大气颗粒物时空分布与来源特征

PM10作为大气污染物监测的主要指标之一,探究大气PM10浓度对大气环境质量和人体健康评价具有重要意义。黄、渤海滨海带包括京、津和辽、冀、鲁、苏等工、农业大省,区域大气PM10污染的时空分布和来源特征具有复杂性和典型性。在锦州、北京、天津、烟台、青岛、连云港和盐城7个城市布设10个采样点,含7个城市点和3个农村点,开展为期一年的大气颗粒物的采样;同时,于冬季1月和夏季7月在锦州、天津和烟台进行合计60 d的加密采样,藉以确定研究区域大气PM10的时空分布和来源特征。结果表明,黄、渤海滨海带大气年均PM10总浓度为(129’18)"g·m~(-3),单月最低值出现在2015年7月盐城农村样点15"g·m~(-3),最高值为2015年3月北京城市点307"g·m~(-3)。盐城大气PM10浓度(城市点(85’27)"g·m~(-3)和农村点(66’35)"g·m~(-3))显著低于其他样点大气PM10浓度。渤海滨海带中西部的京(140’68"g·m~(-3))、津(169’60"g·m~(-3))两市大气PM10年均浓度显著高于东部的锦州(125’41"g·m~(-3))和烟台(109’31"g·m~(-3));而且黄海滨海带大气PM10年均浓度(114"g·m~(-3))显著低于渤海滨海带年均浓度(136"g·m~(-3)),总体上表现出西高东低、北高南低的特征。黄、渤海滨海带城市点和农村点年均浓度分别为(129’18)"g·m~(-3)和(112’30)"g·m~(-3);农村点春冬季大气PM10浓度和城市点浓度相当,无显著差异,夏秋季大气PM10浓度略低于城市浓度,表明农村地区大气颗粒物污染情况也较为严重,需受到关注。区域内PM10浓度季节变化整体表现为春冬高、夏秋低。利用多元回归分析初步判断黄、渤海滨海带PM10属于复合来源,大气PM10浓度约30%的变化与降水、人均能耗和沙尘天气相关。黄、渤海滨海带大气PM10浓度的昼夜变化不大,大气PM10浓度与气温呈现正相关,与风速和降水呈现负相关,表现为受各种气象因素综合作用的影响。