危险货物道路运输探析

本文介绍了国内外危险货物道路运输的现状,归纳总结了危险货物道路运输事故的特点,阐述了我国当前危险货物道路运输存在的主要问题,对危险货物道路运输事故的影响因素进行了全面分析,并提出了相应对策措施.本文的分析可以为政府部门和运输业户控制和管理危险货物道路运输系统提供有益的参考.     

聚丙烯工业废水排放的治理措施

在利用间歇式液相本体法工艺生产聚丙烯时,易产生大量废水,包括闪蒸水环真空泵排放水、聚合釜轴封冷却水排放水、聚合升温用热水罐溢流水等。应最大限度地减少废水的排放量。已经采取的废水减排措施包括:对于真空泵逐渐调小供水量(即减少了排放量);将轴封冷却水收回重复利用;维持热水罐的水位稳定,避免产生溢流。采取上述措施在满足生产要求的同时,最大限度地减少了废水排放量。     

RESIDENCE TIME OF WATER DISCHARGING FROM THE HANGING GARDENS OF ZION PARK1

ABSTRACT: The Hanging Gardens are a unique feature of Zion National Park. Knowledge of the source and residence time of water discharging from the Hanging Gardens is necessary to help preserve these features. Ground-water chemical and isotopic data distinguish the discharge from seeps and springs into two groups, one of low and one of high conductivity. Water with low conductivity likely originates as recharge near the seeps and springs, and it only interacts with the Navajo Sandstone. High conductivity water, on the other hand, originates as recharge on the tops of plateaus to the east, where it interacts with marine rocks of the Carmel Formation. Carbon dating of these ground waters indicates that the low conductivity water is essentially modern recharge, while the high conductivity water was recharged 1,000 to 4,000 years ago.     

ANALYSIS OF ROCK STRESS AROUND A LIQUID WASTE INJECTION SYSTEM IN ILLINOIS1

: The danger to the environment associated with the injection of liquid industrial wastes into a deep, confined, subsurface rock formation may arise from the transport of the waste laterally or vertically in the formation. The pattern of lateral transport, which can take place as a result of convection as well as dispersion and diffusion, can be determined by an approximate analytical solution to the mass transport equation. Vertical transport may take place through both natural fractures and fractures created by hydrostatic stresses generated around the well during injection. To determine the stresses, we used the finite element method to get a numerical solution of the flow equation. We applied a solution of the flow equation to calculate the stress buildup and decay for the Jones & Laughlin Steel Corporation's injection well near Hennepin in Putnam County, Illinois. According to our computations, the stress buildup due to injection is about 0.16 pounds per square inch per foot - psi - (0.362 Newton per square centimeter per meter), which, added to normal pressure, makes an estimated total stress of 0.60 psi/ft (1.36 Newton/cm²/m). That pressure is insufficient to cause fracturing of the Cambrian Eau Claire aquitard, the confining bed for the disposal zone.     

SELECTING A METHOD FOR ESTIMATING SUBSTANCE LOADINGS1

ABSTRACT: Four simple methods for estimating mass transport are evaluated in terms of the assumptions made about the properties of the data set being analyzed. The basic difference between the four methods considered are their assumptions regarding the manner in which concentration is distributed and the relationship between concentration and discharge. The most precise estimates of mass transport into and out of Schwatka Lake, Yukon Territory, were obtained from the model which assumes that concentration is log normally distributed and independent of discharge.     

THE STABILITY OF BLOCKS SUBJECTED TO PLUNGING WATER JETS

Laboratory observations were made on the stability of cubical blocks subjected to plunging water jets. The blocks were placed in a plunge basin at the base of a flip bucket. A dimensionless equation was derived and a nomogram was drawn to facilitate its solution. The results can be applied to determine the size of stones required to armor a plunge basin or scour hole.     

薄膜结构风致振动研究进展

薄膜结构具有质量轻、刚度小、自振频率低的特点 ,因而属于风敏感结构。作用在薄膜结构上的风荷载 ,除与气流本身的特性有关外 ,还与结构在风荷载作用下的位移、速度、加速度等有关 ,从而引起附加的气动力。因此 ,在研究薄膜结构的风致振动时 ,必须考虑流固耦合作用。笔者对薄膜结构的风振研究方法进行了总结 ,主要介绍了简化气弹力学模型方法及简化流体力学解析模型方法 ,并分别用于分析小于临界风速时结构的反应和确定结构的颤振临界风速。     

MASS LOAD ESTIMATION ERRORS UTILIZING GRAB SAMPLING STRATEGIES IN A KARST WATERSHED1

ABSTRACT: Developing a mass load estimation method appropriate for a given stream and constituent is difficult due to inconsistencies in hydrologic and constituent characteristics. The difficulty may be increased in flashy flow conditions such as karst. Many projects undertaken are constrained by budget and manpower and do not have the luxury of sophisticated sampling strategies. The objectives of this study were to: (1) examine two grab sampling strategies with varying sampling intervals and determine the error in mass load estimates, and (2) determine the error that can be expected when a grab sample is collected at a time of day when the diurnal variation is most divergent from the daily mean. Results show grab sampling with continuous flow to be a viable data collection method for estimating mass load in the study watershed. Comparing weekly, biweekly, and monthly grab sampling, monthly sampling produces the best results with this method. However, the time of day the sample is collected is important. Failure to account for diurnal variability when collecting a grab sample may produce unacceptable error in mass load estimates. The best time to collect a sample is when the diurnal cycle is nearest the daily mean.     

用电磁辐射法预测煤与瓦斯突出的实验理论基础

用电磁辐射法预测煤与瓦斯突出是突出研究的新技术手段。本文阐述了电磁辐射法预测突出的理论和实验基础，电磁辐射法预测突出能实现连续、非接触、准确可靠和自动化监测，是煤与瓦斯突出预测技术的发展方向。同时也指出了目前的未知领域和研究成果的缺陷，指明了以后的研究方向和课题。     

Source resolution and risk apportionment to augment the Bubble Policy: Application to a steel plant “bubble”

Source resolution and risk apportionment of emission source categories for risk reduction purposes can be used to enhance the Bubble Policy of the Clean Air Act. This is performed by incorporating receptor modeling techniques of factor analysis and chemical mass balances to assess noncarcinogenic and carcinogenic inhalation risks to a target population for certain pollutants coming from major emission source categories in a steel plant air shed. Source resolution, using factor analysis, statistically interprets a “source” from ambient data. By subsequently quantifying risks from identified metal emission sources using chemical mass balances and risk apportionment, a total additive risk from main source contributors in the steel plant is estimated. From this methodology, the Bubble Policy can be enhanced by targeting only main risk sources or by “risk-trading” with minor impact sources to reduce the total risk (if deemed significant) without arbitrarily reducing risk for all sources in an industrial source complex’s “bubble.”