三普2#地热站供热工程设计方案优化分析

通过分析地热供热的相关概念，建立了高效利用地热能源的一系列实现途径。根据工程的基础材料，从技术和经济方面对单纯地热供热方案、地热燃气调峰方案、热泵配置方案以及最终的组合方案进行了优化和调整，从而为三普2#地热井供热工程提供了优化方案，提高了该地区的地热利用率。     

上海市人口分布变动的空间特征分析

空间自相关分析是一种空间统计的方法。可以揭示区域变量的空间结构形态。通过对2000-2003年期间上海市乡镇人口密度变化率的空间相关性分析，发现上海市近几年人口分布空间变动格局表现为以中心城区为中心的环状分布模式，中心城区和远郊区人口密度变化小。人口增长缓慢，而近郊区人口密度变化大，人口增长迅速。全市人口密度变化率存在着显著的空间集聚现象。四种类型的空间关联在空间分布上具有明显的规律性。研究结果表明，目前上海市人口郊区化趋势明显。高人口密度区域在不断向外扩张，人口分布与经济、交通等社会发展因素的关系日益密切。这些研究结果说明利用空间自相关统计方法能够扩展和加强对人口分布空间模式的研究．从而为经济总体布局和城市化建设提供辅助参考作用。     

Computer-assisted analysis of fetal behavioural states

A computerized system which simultaneously acquires and quantifies several ultrasonically detected fetal activities, including gross body movements, breathing movements, and eye movements, was developed in order to obtain additional quantitative data on fetal behaviour. Movements were automatically related to fetal heart rate allowing computation of their mean incidence, duration, lag time and percentage time spent moving during different heart rate patterns. The incidence of various behavioural states was also calculated. The study of 15 healthy fetuses near term revealed the existence of statistically significant differences in these parameters between low and high variability patterns of fetal heart rate suggesting a quantitative modulation of fetal movements by behavioural states.     

不同升温速率下模块装药的烤燃特性分析

目的 研究不同升温速率下模块装药烤燃特性的变化.方法 基于模块装药结构及其烤燃化学反应机理,提出基本假设,建立二维非稳态烤燃计算模型,通过数值模拟计算分析研究模块装药在不同工况下的烤燃特性.结果 在3.30、5.25、7.20 K/h的加热条件下,模块装药发生烤燃响应的着火温度分别为476.6、473.1、477.1 ...     

Pipeline leakage detection and isolation: An integrated approach of statistical and wavelet feature extraction with multi-layer perceptron neural network (MLPNN)

Leakage diagnosis of hydrocarbon pipelines can prevent environmental and financial losses. This work proposes a novel method that not only detects the occurrence of a leakage fault, but also suggests its location and severity. The OLGA software is employed to provide the pipeline inlet pressure and outlet flow rates as the training data for the Fault Detection and Isolation (FDI) system. The FDI system is comprised of a Multi-Layer Perceptron Neural Network (MLPNN) classifier with various feature extraction methods including the statistical techniques, wavelet transform, and a fusion of both methods. Once different leakage scenarios are considered and the preprocessing methods are done, the proposed FDI system is applied to a 20-km pipeline in southern Iran (Goldkari-Binak pipeline) and a promising severity and location detectability (a correct classification rate of 92%) and a low False Alarm Rate (FAR) were achieved.     

混合电镀废水处理工艺

物化法是处理混合电镀废水的一种有效方法,对COD、Pb离子、Ni离子尤其是Pb离子、Ni离子的处理效果非常理想。COD的去除率达到80.1%,Pb离子的去除率达到97.2%,Ni离子的去除率达到98.1%,中间产出的污泥也可得到较好处理。     

伊宁市空气中硫酸盐化速率与二氧化硫相关性研究

对伊宁市1999-2002年空气中硫酸盐化速率和二氧化硫监测值进行回归分析,结果表明,二者之间存在显著的线性正相关关系,但对各年度回归方程斜率和截距进行统计检验,则表现出显著的差异。     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.     

Improving flammable mass estimation for vapor cloud explosion modeling in an offshore QRA

Presence of congestion and confinement in offshore modules due to limited availability of space make Vapor Cloud Explosions (VCEs) a significant contributor to risk. There are several methods available for quantifying the blast overpressure generated over distances and time. The approaches range from one-dimensional analysis using correlation models to 3-D analysis using Computational Fluid Dynamics (CFDs). The correlation models are easy to use and well-suited for assessing a number of credible VCE scenarios. However, the overpressure results predicted by correlation models depend on a good estimate of flammable mass. This paper proposes a method to improve the estimation of flammable mass. The UKOOA Ignition model developed by the Energy Institute London is used to estimate the flammable mass; and is modified to account for the effect of mitigation measures on release rate. A directional probability for wind is also added to the model. The proposed model takes into consideration the platform geometry and offshore conditions for each scenario, release location and direction, and wind direction. An offshore production platform with three deck levels is presented as an example case. The flammable mass is also computed using CFD and the results are compared to that of the proposed and the conventional methods. The results show that the flammable masses for selected scenarios are better estimated by the proposed method, being much lower than estimated by the conventional method, though larger than the CFD results. This paper presents an interim result of a project undertaken to improve QRA studies for VCE events.     

高炉渣制备光催化剂及其催化活性的研究

以废弃的冶金高炉渣为原料,采用混酸酸溶-水热合成法制备了光催化剂,并对其进行了SEM、UV-Vis、XRD、比表面积等物性测试分析;通过处理甲基橙模拟废水,探讨了制备过程中渣酸比、混酸配比、渣用量、溶渣时间等条件对高炉渣制光催化剂活性的影响。将所制光催化剂与P25光催化剂进行对比分析,结果表明,高炉渣制光催化剂不仅具有较高的光催化活性,而且制备成本低廉,仅为P25光催化剂的1/10,这对于冶金高炉渣的循环再利用及光催化氧化技术的工业化应用具有重要的实际意义。