辽宁沿海经济带港口竞争力和效率评价——基于主成分分析和数据包络分析

通过建立合理的指标体系,使用主成分分析法评价辽宁沿海经济带港口整体竞争力,发现统计期间内其竞争力不断增强,交通配套设施在此期间始终停滞不前甚至下降,是整体竞争力提升的一个消极因素.将计算结果代入DEA方法评价其效率,发现辽宁沿海经济带港口管理较好,在2004年之后效率始终保持较高水平,仍然有继续提升的空间.     

Measurement of agricultural total factor productivity growth incorporating environmental factors: A nutrients balance approach

This article proposes to use nutrient-orientated environmental efficiency (EE) measures to construct a nutrient total factor productivity index (NTFP). Since nutrient-orientated EE measures are consistent with the materials balance principle, NTFP index is superior to other existing TFP indexes. An empirical study on the environmental performance of an agricultural sector in 30 OECD countries from 1990 to 2003 yielded several important findings. First, these countries should be able to produce current outputs with at least 50% less aggregate eutrophying power, implying that they should have been able to substantially reduce the potential for eutrophication. Second, traditional TFP has grown by 1.6% per annum due to technical progress; however, there are lags in the responses of several countries to this technical progress. Third, environmental TFP has grown at a slower rate than traditional TFP growth due to reductions in nutrient-orientated allocative efficiency. Finally, changes in input combinations could have significantly improved environmental efficiency and productivity. These findings favor policy interventions and faster technological transfer to improve environmental performance.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Zn-TiO2纳米管的光催化活性

采用水热合成-浸渍法制备锌掺杂TiO2纳米管(Zn-TiO2纳米管),透射电镜照片显示Zn-TiO2纳米管为两端开口形貌均一的中空管状结构,管径约6～8 nm,壁厚约1 nm,长度约50～200 nm。研究了Zn-TiO2纳米管对甲基橙的光催化性能,结果表明:掺杂适量锌提高了TiO2纳米管对甲基橙的光催化降解性能,0.4%Zn-TiO2纳米管的光催化性能最佳。同时还探讨了Zn-TiO2纳米管用量和初始pH值等因素对光催化降解甲基橙的影响,结果显示Zn-TiO2纳米管能有效地降解甲基橙。随着光催化反应进行,CODCr去除率和脱色率变化规律不完全相同,可能是由于芳基和烷基降解速率不同所致。     

ZnTiO3-TiO2复合光催化剂的制备及光催化降解有机污染物机制分析

TiO_2光催化剂因无毒无害而在光催化降解污染物领域有巨大潜力.但由于TiO_2的光生电子空穴复合较快,量子效率较低,限制了它的广泛使用.在本研究中,通过溶胶-凝胶(Sol-Gel)法制备了ZnTiO_3-TiO_2异质结复合光催化剂,分析了配比和煅烧温度对材料光催化性能的影响,以甲基橙(MO)溶液为模拟污染物进行光催化降解,探讨了其催化效果及效率提升的机制.结果表明,在紫外光照射下,ZnTiO_3与TiO_2比值为0. 3时,在600℃下煅烧3 h后,其催化效果最佳且表现出良好的化学稳定性.通过光电流测试和电子自旋共振波谱仪的检测结果,证明复合光催化剂的光生电子和空穴复合率降低,从而提高了光催化活性.     

工业换热设备的能效评价意义及方法

本文从节能角度,阐述了换热器能效评价的意义;根据换热器的用途,将其分为工艺换热器和辅助换热器,以此为基础,介绍影响换热器能效的主要因素;从我国目前对换热器能效评价的现状出发,提出热力学参数法一用传递有效度方法适合目前的技术水平现状,并简要介绍了该方法的原理和应用。本文的研究,希望对我国换热器能效评级工作有所帮助。     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.     

基于PLC的电器能效测试系统设计

文章通过介绍一种基于PLC并符合GB 21519-2008要求的储水式热水器能效测试系统设计方案,研究PLC在电器能效测试的应用。该系统采用PLC作为下位机,控制电磁阀通断给所检测的样品供水和排水,通过读取能耗检测元件信号计算出能耗值,通过重量传感器输出量的变化换算得出储水式热水器的容积,利用温度模块测得样机各点的温度值;上位机采用PC机,利用组态软件,对现场实施监控与数据实时处理,通过友好的界面快速、实时、准确分析、计算、储存能效值。该系统的设计能有效地提高能效测试的可靠性和工作效率。     

Home energy efficiency grants and advice: findings from the English Midlands

Research was conducted in Nottinghamshire, England to investigate public attitudes regarding home energy efficiency issues. Quantitative data were collected in the form of a postal survey, achieving over three hundred responses. Additionally, predominantly qualitative data were collected in semi-structured interviews in 15 homes. The issues investigated included the grant-funded energy efficiency measures installed by the public, the organisations providing grants, the means by which the recipients were referred to the organisations, and the public's preferences regarding energy efficiency advice. Findings were made about the local authority's success in encouraging the take-up of energy efficiency grants, about the public's preferences for the means by which advice should be provided, about trust relating to energy efficiency grants provided by gas and electricity suppliers, and about people's knowledge of the most effective energy efficiency measures. Additional findings were drawn about specific energy efficiency issues, including old heating systems and compact fluorescent light bulbs.     

Policy,Institutional and Market Barriers to the Implementation of Clean Development Mechanisms (CDM) in China

China is the second largest emitter of greenhouse gases (GHG) in the world, with potentially about two thirds of total Certified Emission Reductions (CERs) for Asia on the world carbon market (). Since 68% of its primary energy is from coal, China's average energy intensity is 7.5 times higher than the EU and 4.3 times higher than the US (EU, 2003 The European Union on-line. (2003). (http://europa.eu.int/index_ns_en.htm accessed Oct 2003  [Google Scholar]). Therefore, introducing advanced clean technologies and management to China represents opportunities for Annex I countries to obtain low-cost CERs through CDM projects, and access to one of the largest potential energy conservation markets in the world.

CDM can provide a win-win solution for both China and Annex I countries, and the Chinese government considers that the introduction of CDM projects can bring advanced energy technologies and foreign investment to China, thereby helping China's sustainable economy and generating CERs. As energy efficiency is generally low and carbon intensity is high in both China's energy supply and demand sectors, numerous options exist for cost-effective energy conservation and GHG mitigation with CDM.

This paper reviews current Chinese policies and administrative and institutional settings for CDM cooperation, and discusses existing policy, institutional and other barriers in the energy market by drawing on observations and experience from previous initiatives such as Cleaner Production and energy efficiency. Some options to remove these barriers are addressed. In order to make CDM projects feasible, China's government needs to promote awareness, streamline administrative systems, and be more active in building a competitive edge in the world carbon market.