Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

上海市环保行政审批系统的设计与实现

上海市环保局行政审批系统采用流程控制和数据传输交换技术,构建了申报系统、审批系统、业务管理系统、跟踪监控系统四部分,实现了包括建设项目环评、固废、辐射等15项行政审批和23项非行政审批事项的“一口受理、一办到底”,通过信息技术实现了外网申报、内网审批,实现了环保审批流程优化再造和审批全过程公开透明,实现了“便民审批”、“高效审批”、“阳光审批”。     

重质油储罐固定式泡沫灭火系统设计优化研究

通过重质油储罐的实体火灭火试验,获得了氟蛋白泡沫液和水成膜泡沫液的供给强度与灭火时间对应关系数据,确定了每种泡沫液扑救重质油储罐火灾的最低泡沫供给强度;以10 000 m3固定顶重质油储罐为例进行了泡沫系统设计计算,将优化设计方案与原有设计方案进行了对比,主要变化是泡沫发生器数量从4只提高至6~8只,泡沫主管线管径从DN200提高至DN250,泡沫消防泵流量也相应提高。优化后的储罐泡沫灭火系统提高了泡沫灭火能力,提升了系统的可靠性,降低了储罐火灾风险。     

孔雀石绿高效脱色菌株的筛选、鉴定与脱色特性研究

孔雀石绿应用广泛,但难以降解且对许多生物都具有致癌致畸性.从浙江温州皮革厂污泥中分离筛选到1株孔雀石绿高效脱色菌株DH-9,16S rRNA基因序列分析表明,该菌株属于Enterabacter sp.属.单因素实验结果表明:当pH值在3.0~9.0时,培养24 h以后,该菌株对孔雀石绿的脱色率均在90%以上;脱色的最适温度范围为30~40℃;多数所测试碳源对脱色没有显著影响,而多数所测试氮源则对脱色有显著的促进作用;所测金属离子中,仅Cu2+和Fe3+对脱色有显著的抑制效应;此外,当接种量达到3%(V∶V,菌体干重约0.23 g·L-1)以后,12 h的脱色率即可达到90%以上.响应面设计实验结果显示,菌株DH-9对孔雀石绿脱色的最优操作条件为:pH 6.0、1.0 g·L-1的半乳糖、1.0 g·L-1的酵母粉、3.0 mmol·L-1的氯化钙以及培养温度为34.5℃.验证实验结果表明:在最优条件下,该菌株在8 h内对孔雀石绿的脱色率可达99.4%.总体而言,菌株DH-9在孔雀石绿脱色中的实际应用潜能较大.     

对秦皇岛港西港搬迁改造工程的绿色思考

秦皇岛港西港搬迁改造工程对完善港口功能,振兴临港产业,缓解城市污染,促进港城互动,建设美丽港城,具有重要历史意义。针对搬迁改造工程中存在的问题与不足,提出应进一步完善搬迁改造规划,加大环保力度,从秦皇岛港口规划、布局到建设、生产,全面落实《绿色港口评价等级标准》,将改造工程对环境的负面影响降到最低,全力将秦皇岛港建设成为绿色港口。     

基于两级拓扑优化的振动台扩展台面设计与试验验证

根据拓扑优化基本原理,利用OptiStruct进行振动台扩展台面的结构最优化设计,通过两级拓扑优化完成结构的拓扑寻优。首先利用整体级拓扑优化,找到结构的整体最佳构造。然后利用局部级拓扑优化,对局部结构进行拓扑寻优,最终完成产品的结构设计。试验结果与仿真结果对比表明,误差在5%以内,表明方法的有效性和实用性。     

Conservation by Design

Abstract: Conservation researchers are increasingly aware of the need to conduct interdisciplinary research and to engage nonscientists in practical applications of conservation biology. But so far, industrial designers have been left out of such collaboration and outreach efforts. Conservation of wildlife often depends on products such as nest boxes, feeders, barriers, and corridors, all of which have a designed component that is frequently overlooked. Furthermore, many products are adopted without testing on short or long time scales. We argue that the design of products for conservation, and hence their functionality, effectiveness, and value, can be improved through collaboration with industrial designers. We see four key benefits that can arise from interactions with industrial designers: improvement of product quality and value, innovation and improvement in functionality of products, harmonization of conservation products with local values, and development of a psychological biomimesis approach to design. The role of industrial designers in conservation projects would be to improve factors such as product durability, affordability, functionality, and aesthetic appeal to local people. Designers can also help to create multiple product options whose success can be tested in the field. We propose that collaborations with industrial designers can contribute to the development of improvements to existing products and innovations in the practice of animal conservation.     

An assessment methodology for successional systems. I. Null models and the regulatory framework

Standard procedures for evaluating environmental impact involve comparison between before and after conditions or scenarios or between treatment and control site pairs. In many cases, however, endogenous directional change (natural succession) is expected to occur at a significant rate over the period of concern, particularly for manmade systems such as impoundments. Static evaluations do not provide an adequate approach to such problems. A new evaluation frame is proposed. Nominal system behavior over time is characterized by a stochastic envelope around a nominal trajectory. We show that both the state variance and the sampling variance can change over time. In this context, environmental regulations can be framed as constraints, targets, or conformance to ideal trajectories. Statistical tests for determining noncompliance are explored relative to process variance, sample error, and sample size. Criteria are elucidated for choosing properties to monitor, sample size, and sampling interval.     

Productivity equation for reclaiming surface mines

This article addresses the development of an agricultural productivity equation for predicting new soil (neo-sol) plant growth potential in Clay County, Minnesota, USA. Soil factors examined in the study include percent organic matter, percent slope, percent rock fragments, hydraulic conductivity, electrical conductivity, pH, topographic position, available water-holding capacity, bulk density, and percent clay. Squared terms and two-factor interaction terms were also examined as possible regressors. A best equation was selected that had a multiple coefficient of determination of 0.7399 and has five significant regressors and intercept withP.0001. The regressors are hydraulic conductivity, percent slope squared, bulk density times percent rock fragments, electrical conductivity times percent rock fragments, and electrical conductivity times percent organic matter. The regressors predict soil suitability for a general crop model. The crops included in the model are wheat, oats, barley, soybeans, sugar beets, sunflowers, and grasses/legumes.     

石油工业废弃物处置及其生物治理趋势

鉴于我国石油工作者对石油工业废弃物的普遍关注，现在介绍生物治理的基本概念及ＳＰＥ石油工程师协会中有关含油污泥生物处置的途径及其突出优越性。生物液／固处理工艺（ＬＳＴ）是目前含油污泥处置现场最经济可行的处置方案。这种好氧的ＬＳＴ工艺过程，能够比较充分地代谢和降解石油污泥中的油和脂并大量除去多环芳烃类（ＰＡＨ）化合物及其它有机化合物，明显地降低了石油废弃物对人、畜的毒害程度。其工艺较简单，操作也简易，凡经此工艺处理后的废弃物不留残毒和后患，因此早已被世界上先进国家的炼油业视为处理含油污泥的有效选择了。石油工业废弃物的生物防治和生物降解工艺较大程度地领先于目前我国现场正在执行的各种处理含油废弃物的处理工艺。