Investigations on removal of SO_2 from flue gas by aerosol formation in pulsed corona discharge process

ＩｎｖｅｓｔｉｇａｔｉｏｎｓｏｎｒｅｍｏｖａｌｏｆＳＯ２ｆｒｏｍｆｌｕｅｇａｓｂｙａｅｒｏｓｏｌｆｏｒｍａｔｉｏｎｉｎｐｕｌｓｅｄｃｏｒｏｎａｄｉｓｃｈａｒｇｅｐｒｏｃｅｓＺｈａｏＺｈｉｂｉｎ，ＬｉｕＪｉｙｏｎｇＤｅｐａｒｔｍｅｎｔｏｆＥｎｖｉ...     

湿法脱硫除尘技术研究

介绍了一种新的燃煤锅炉烟气湿法脱硫、除尘技术 ,提出了新的工艺流程 ,新的脱硫除尘装置。经现场应用表明 ,该技术具有良好的脱硫、除尘效果。     

烟气脱硫技术的应用研究

概述了国内外烟气脱硫技术的应用现状、脱硫原理及其特点 ,并提出了我国烟气脱硫技术的研究开发方向     

脉冲放电烟气脱硫脱硝技术研究进展

综述了脉冲放电等离子体烟气脱硫脱硝技术的发展历史、研究现状、进展及其存在的问题。     

Assessment of Contamination By Percolation Of Septic Tank Effluent Through Natural and Amended Soils

Fly ash has been found to be a potential material for the treatment of municipal and industrial wastewater, and may be useful in the treatment of septic tank effluent. Laboratory columns (30 cm) were used to determine the sorption capacity and hydraulic properties of lagoon fly ash, loamy sand, sand, and sand amended by lagoon fly ash (30 and 60%) and red mud gypsum (20%). The removal of chemical oxygen demand (COD) was high in all column effluents (71–93%). Extent of nitrification was high in Spearwood sand, Merribrook loamy sand and 20% red mud gypsum amended Spearwood sand. However, actual removal of nitrogen (N) was high in columns containing lagoon fly ash. Unamended Spearwood sand possessed only minimal capacity for P sorption. Merribrook loamy sand and red mud gypsum amended sand affected complete P removal throughout the study period of 12 weeks. Significant P leakage occurred from lagoon fly ash amended sand columns following 6–10 weeks of operation. Neither lagoon fly ash nor red mud gypsum caused any studied heavy metal contamination including manganese (Mn), lead (Pb), zinc (Zn), cadmium (Cd) and chromium (Cr) of effluent. It can be concluded that Merribrook loamy sand is better natural soil than Spearwood sand as a filter medium. The addition of lagoon fly ash enhanced the removal of P in Spearwood sand but the efficiency was lower than with red mud gypsum amendment.     

脱硫技术应用中常见问题

对锅炉所采用的几种脱硫设备的特点作了比较，并对其应用过程中存在的一系列问题，诸如饱和问题、腐蚀问题、用水问题、带水问题和黑烟问题作了探讨，为有关单位选择采用脱硫技术时提供参考。     

悬浮水幕式除尘脱硫器的研究

介绍了悬浮水幕式除尘脱硫器的结构及工作原理，分析了影响除尘脱硫效果的因素，并提出相应的解决措施。试验及生产实践表明，该装置脱硫除尘效果均达到或超过国内外同类装置的水平，且该装置工艺流程简单、不存在堵塞问题。避免了二次污染     

脉冲放电等离子体烟气脱硫脱硝工业试验

40000—50000Nm^3／h工业试验结果表明：烟气温度75℃-80℃，脱硫效率大于90％，脱硝效率大于40％，烟气温度90℃-95℃，脱硫效率大于80％，脱硝效率大于50％；能耗小于3.0Wh／Nm^2；随着温度升高，SO2热化学反应效率逐渐降低；随着氨硫化学计量比增大，氨泄漏逐渐增加，烟气温度90℃。95％，氨泄漏增加更为迅速。并分析了副产物的成分，阐述了脱硫脱硝的机理，探讨了烟气排放的温度。     

高硫石油焦的脱硫研究

采用湿化学氧化和高温煅烧相结合的方法对含硫量6.28%(w)的石油焦进行二段脱硫处理,并利用FTIR、SEM和XRD技术对脱硫机理进行了探讨。实验结果表明:氧化工段的优化条件为硝酸与30%(w)双氧水的体积比1∶2、氧化时间10 h、氧化温度80℃、液固比35 m L/g、石油焦粒径106μm以下,优化条件下的氧化脱硫率为26.91%;煅烧工段的优化条件为1 280℃下煅烧6 h,优化条件下的煅烧脱硫率为79.43%,总脱硫率为83.95%。表征结果显示:经处理后石油焦中的黄铁矿类无机硫以及硫醇类和大部分噻吩类有机硫得到有效脱除,剩余噻吩硫转变为更稳定的形式;处理后的石油焦微观形貌轮廓变得清晰和圆润;处理前后石油焦的石墨雏晶结构基本未发生变化。     

湿法脱硫石灰石制浆系统的比选

石灰石制浆系统被广泛应用于燃煤电厂石灰石／石膏湿法烟气脱硫系统中。对典型的湿磨制浆和石灰石粉制浆系统从工艺流程特点、设备组成、技术经济等方面进行详细的分析比较。考虑到1000MW机组工程石灰石耗量较大，从电厂长期运行角度考虑，推荐采用技术成熟、运行经济的石灰石湿磨制浆方案，同时要加强湿磨制浆系统的日常维护和管理：